2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Care and cleaning Installation What to do if… Product description Technical data Operating instructions Environment concerns Helpful hints and tips Subject to change without notice...
Page 3
3 • Use only the accessories supplied with • Prevent damage to the bottom of the ap- appliance. pliance from steam and moisture, e.g. • Be careful when you connect the appli- from a dishwasher or oven. ance to the near sockets. Do not let elec- •...
4 electrolux with applicable cable. Speak to your local Disposal of the appliance Service Force Centre. • To prevent the risk of physical injury or • The appliance must have the electrical in- damage stallation which lets you disconnect the –...
Page 5
5 components as shown in the diagram. 2. Remove the caps and crowns of the Screw the parts together without using ex- burner. cessive force. 3. With a socket spanner 7 remove the in- jectors and replace them with the ones...
Page 6
6 electrolux • Always use a correctly installed shock- proof socket. • Make sure that there is an access to the mains plug after installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Page 7
20 mm (max 150 mm) 60 mm 180 cm 2 360 cm 2 MANUFACTURER: ELECTROLUX ITALIA S.p.A. C.so Lino Zanussi, 30 33080 PORCIA (PN) - ITALIA a) Removable panel b) Space for connections Kitchen unit with oven The hob recess dimensions must obey the...
8 electrolux PRODUCT DESCRIPTION Semi-rapid burner Semi-rapid burner Control knobs Spark generator button Auxiliary burner Rapid burner Control knobs Symbol Description Symbol Description ignition position / maximum gas supply no gas supply / off position minimum gas supply OPERATING INSTRUCTIONS...
9 If the burner accidentally goes out, turn Turning the burner off the control knob to the off position and To put the flame out, turn the knob to the try to light the burner again after mini- symbol mum 1 minute.
10 electrolux After cleaning, dry the appliance with a soft 2. Clean the appliance with a damp cloth cloth. and some detergent. The stainless steel can become tarnished if 3. At the end rub the appliance dry with it is too much heated. Refer to this you a clean cloth.
11 If there is a fault, first try to find a solution to dealer may not take place free of the problem yourself. If you cannot find a charge, even during the warranty peri- solution to the problem yourself, speak your dealer or the local Service Force Centre.
12 electrolux Burner Ø By-pass in 1/100 Gas connection: R 1/2 " Category: II2H3+ Semi-rapid Gas supply: G20 (2H) 20 mbar Rapid Appliance class: By-pass diameters Burner Ø By-pass in 1/100 Auxiliary Gas burners NORMAL POWER NORMAL DUCED NATURAL GAS...