hit counter code
Hitachi CP-X308 User's Manual And Operating Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. X308 - CP XGA LCD Projector
  6. User's manual and operating manual
Hitachi CP-X308 User's Manual And Operating Manual

Hitachi CP-X308 User's Manual And Operating Manual

Hide thumbs Also See for CP-X308:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Manual, Network Manual
Projector
CP-X308
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING
WARNING
CAUTION
NOTE
Trademark acknowledgment
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X308

Summary of Contents for Hitachi CP-X308

  • Page 1 Projector CP-X308 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING WARNING CAUTION NOTE Trademark acknowledgment...
  • Page 2 Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.

  • Page 3: Safety Precautions

    Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
  • Page 4 Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
  • Page 5 Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
  • Page 6 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
  • Page 7 Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
  • Page 8 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
  • Page 9 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 10: Regulatory Notices

    Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Table Of Contents

    Contents About this manual... 1 PICTURE menu ... . 27 Contents ....2 RIGHTNESS ONTRAST AMMA...

  • Page 12: Contents Of Package

    Projector features / Preparations Contents of package NOTE Fastening the lens cover...

  • Page 13: Part Names

    Part names HOT! Projector 16, 69 HOT! WARNING HOT! CAUTION...

  • Page 14: Control Panel

    Part names Control panel 17, 23 16, 71 Rear panel CAUTION...

  • Page 15: Remote Control

    Part names Remote control VIDEO COMPUTER SEARCH BLANK ASPECT AUTO MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 15, 21 MENU POSITION ENTER RESET 15, 17 20, 23 15, 23, 24 15, 23, 24 15, 23 15, 23, 24...
  • Page 16 Setting up Arrangement On a horizontal surface Suspended from the ceiling Screen size Projection distance Projection distance Screen Screen Screen Screen (diagonal) height height height height inch inch inch inch inch inch inch inch inch 125 103 129 123 141 116 144 137 156 129 172 165...
  • Page 17 Setting up Arrangement (continued) WARNING CAUTION...

  • Page 18: Connecting Your Devices

    Setting up Connecting your devices Monitor RS-232C AUDIO OUT RGB OUT AUDIO OUT RGB OUT RGB IN Speakers AUDIO IN VCR/DVD player VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT AUDIO OUT AUDIO OUT...
  • Page 19 Setting up Connecting your devices (continued) USB storage SD card WARNING CAUTION...
  • Page 20 Setting up Connecting your devices (continued) NOTE About Plug-and-Play capability...

  • Page 21: Using A Usb Storage

    Setting up Connecting your devices (continued) Using a USB storage Using an SD card SD CARD SD CARD Inserting the SD card Using the slot cover lock for security Removing the SD card WARNING CAUTION NOTE...
  • Page 22 Setting up Connecting power supply WARNING Using the security bar and slot WARNING CAUTION NOTE...

  • Page 23: Putting Batteries

    Remote control Putting batteries (HITACHI MAXELL, Part No.LR6 or R6P) WARNING About the remote control signal 30º 30º NOTE...

  • Page 24: Changing The Frequency Of Remote Control Signal

    Remote control Changing the frequency of remote control signal VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE POSITION MENU ENTER RESET Using as a simple PC mouse & keyboard (1) HOME key: (2) END key: (3) PAGE UP key: (4) PAGE DOWN key:...

  • Page 25: Power On/Off

    Power on/off Turning on the power VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE POSITION MENU ENTER RESET Turning off the power 71). WARNING NOTE...

  • Page 26: Operating

    Operating Adjusting the volume COMPUTER VIDEO SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME MUTE PAGE DOWN FREEZE MY BUTTON KEYSTONE MENU POSITION ENTER RESET Temporarily muting the sound VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE...

  • Page 27: Searching An Input Signal

    Operating Selecting an input signal (continued) VIDEO COMPUTER SEARCH BLANK ASPECT AUTO MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE Searching an input signal VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON...
  • Page 28 Operating Adjusting the projector's elevator CAUTION Adjusting the zoom and focus...

  • Page 29: Using The Automatic Adjustment Feature

    Operating Using the automatic adjustment feature For a computer signal or MIU signal VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE MENU POSITION For a video signal and s-video signal For a component video signal Adjusting the position FREEZE...
  • Page 30 Operating Correcting the keystone distortions MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE Using the magnify feature VIDEO COMPUTER SEARCH BLANK ASPECT AUTO MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE NOTE...
  • Page 31 Operating Freezing the screen VIDEO COMPUTER SEARCH BLANK ASPECT AUTO MAGNIFY HOME PAGE UP VOLUME PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE POSITION MENU Temporarily blanking the screen VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY PAGE UP VOLUME HOME PAGE DOWN MUTE FREEZE MY BUTTON...

  • Page 32: Using The Menu Function

    Operating Using the menu function POSITION MENU ENTER RESET In the EASY MENU...
  • Page 33 Operating Using the menu function (continued) In the Advanced Menu...

  • Page 34: Easy Menu

    EASY MENU Item Description ASPECT AUTO KEYSTONE EXECUTE KEYSTONE PICTURE MODE...
  • Page 35 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu...

  • Page 36: Picture Menu

    PICTURE menu Item Description BRIGHTNESS CONTRAST #1 DEFAULT #1 CUSTOM #2 DEFAULT #2 CUSTOM #6 CUSTOM #3 DEFAULT #3 CUSTOM #6 DEFAULT #5 CUSTOM #5 DEFAULT #4 CUSTOM #4 DEFAULT To adjust CUSTOM GAMMA...

  • Page 37: Color

    PICTURE menu PICTURE menu (continued) Item Description #1 HIGH DEFAULT #1 HIGH CUSTOM #2 MID DEFAULT #2 MID CUSTOM #6 Hi-BRIGHT-3 CUSTOM #3 LOW DEFAULT #6 Hi-BRIGHT-3 DEFAULT #3 LOW CUSTOM #5 Hi-BRIGHT-2 CUSTOM #5 Hi-BRIGHT-2 DEFAULT #4 Hi-BRIGHT-1 CUSTOM #4 Hi-BRIGHT-1 DEFAULT To adjust CUSTOM COLOR TEMP...

  • Page 38: My Memory

    PICTURE menu PICTURE menu (continued) Item Description SHARPNESS LOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MEMORY SAVE-1, SAVE-2, SAVE-3, SAVE-4...

  • Page 39: Image Menu

    IMAGE menu Item Description For a computer signal or MIU signal For a Video signal, S-video signal or Component video signal ASPECT For no signal OVER SCAN V POSITION above...

  • Page 40: Auto Adjust Execute

    IMAGE menu IMAGE menu (continued) Item Description H POSITION above H PHASE H SIZE For a computer signal or MIU signal For a video signal and s-video signal AUTO ADJUST EXECUTE For a component video signal...

  • Page 41: Input Menu

    INPUT menu Item Description PROGRESSIVE VIDEO NR COLOR SPACE COMPONENT...

  • Page 42: Ideo Format

    INPUT menu INPUT menu (continued) Item Description VIDEO FORMAT FRAME LOCK • COMPUTER IN...
  • Page 43 INPUT menu INPUT menu (continued) Item Description RESOLUTION...

  • Page 44: Setup Menu

    SETUP menu Item Description AUTO KEYSTONE EXECUTE KEYSTONE...

  • Page 45: Whisper

    SETUP menu SETUP menu (continued) Item Description WHISPER MIRROR VOLUME SPEAKER...
  • Page 46 SETUP menu SETUP menu (continued) Item Description AUDIO...

  • Page 47: Screen Menu

    SCREEN menu Item Description LANGUAGE MENU POSITION BLANK...
  • Page 48 SCREEN menu SCREEN menu (continued) Item Description START UP...
  • Page 49 SCREEN menu SCREEN menu (continued) Item Description MyScreen below MyScreen Lock...
  • Page 50 SCREEN menu SCREEN menu (continued) Item Description MESSAGE SOURCE NAME...

  • Page 51: Option Menu

    OPTION menu Item Description AUTO SEARCH AUTO KEYSTONE AUTO ON...

  • Page 52: Auto On , Auto Off , L

    OPTION menu OPTION menu (continued) Item Description AUTO OFF LAMP TIME FILTER TIME...
  • Page 53 OPTION menu OPTION menu (continued) Item Description MY BUTTON SERVICE...
  • Page 54 OPTION menu OPTION menu (continued) Item Description FAN SPEED AUTO ADJUST GHOST SERVICE FILTER MESSAGE...
  • Page 55 OPTION menu OPTION menu (continued) Item Description KEY LOCK REMOTE FREQ. SERVICE INFORMATION FACTORY RESET...
  • Page 56 OPTION menu OPTION menu (continued) Item Description 1. Using Security Features 1.1 Inputting the PASSWORD 8471 below SECURITY 1.2 Changing the PASSWORD...
  • Page 57 OPTION menu OPTION menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 2. Using the MyScreen PASSWORD Function SECURITY PASSWORD 2.1 Turning on the MyScreen Function 2.2 Setting the PASSWORD...
  • Page 58 OPTION menu OPTION menu (continued) Item Description 2.3 Turning the PASSWORD off SECURITY 2.4 If you have forgotten your PASSWORD 3. Using the PIN LOCK Function 3.1 Registering the PIN Code...
  • Page 59 OPTION menu OPTION menu (continued) Item Description SECURITY 3.2 Turning Off the PIN LOCK Function 3.3 If you have forgotten your PIN Code...
  • Page 60 OPTION menu OPTION menu (continued) Item Description 4. Using the Transition Detector Function Transition Detector 4.1 Turning On the Function SECURITY Transition Detector 4.2 Setting the PASSWORD...
  • Page 61 OPTION menu OPTION menu (continued) Item Description 4.3 Setting the Transition Detector off SECURITY 4.4 If you have forgotten your PASSWORD...
  • Page 62 MIU menu NOTE Network Settings of the User’s Manual - Network Guide) Date/Time Settings of the User’s Manual - Network Guide) Item Description Live Mode of the LIVE MODE User’s Manual - Network Guide) LIVE MODE SETTING...

  • Page 63: Miu Menu

    MIU menu MIU menu (continued) Item Description QUIT PRESENTER MODE LIVE MODE SETTING SINGLE MULTI MODE MULTI...

  • Page 64: P C - Less Presentation , S

    MIU menu MIU menu (continued) Item Description SINGLE PC mode LIVE MODE DISPLAY SETTING USER NAME MULTI PC mode PC-LESS PRESENTATION THUMBNAIL SLIDE SHOW...
  • Page 65 MIU menu MIU menu (continued) Item Description DIRECTORY DISPLAY SIZE PC-LESS PRESENTATION CONFIG. REMOVE MEDIA SETUP DHCP (Dynamic Host Protocol)
  • Page 66 MIUmenu MIU menu (continued) Item Description ADDRESS SUBNET MASK DEFAULT GATEWAY SETUP SERVER TIME DIFFERENCE DATE TIME Date/Time Settings of the User’s Manual - Network Guide)
  • Page 67 MIU menu MIU menu (continued) Item Description MODE ENCRYPTION SETUP DEFAULT SSID CUSTOM...
  • Page 68 MIU menu MIU menu (continued) Item Description SSID SETUP SPEED • • NETWORK MODE...
  • Page 69 MIU menu MIU menu (continued) Item Description PROJECTOR NAME...
  • Page 70 MIU menu MIU menu (continued) Item Description e-SHOT (Still Image Transfer) Display of the User’ s Manual - Network Guide) To switch the image displayed e-SHOT To return to the menu memory card or USB memory...
  • Page 71 MIU menu MIU menu (continued) Item Description 58, 59, 60 INFORMATION MIU RESTART SERVICE...

  • Page 72: Closed Caption) Menu

    C.C. (Closed Caption) menu Item Description DISPLAY MODE CHANNEL...

  • Page 73: Maintenance

    Maintenance Replacing the lamp Type number : DT00841 Replacing the lamp In case of replacement by yourself, follow the following procedure. CAUTION NOTE...

  • Page 74: Lamp Warning

    Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING About disposal of a lamp:...
  • Page 75 Maintenance Type number : MU04951...
  • Page 76 Maintenance WARNING NOTE...

  • Page 77: Replacing The Internal Clock Battery

    Maintenance Replacing the internal clock battery HITACHI MAXELL, Part No.CR2032 WARNING NOTE Date/Time Settings in the User's Manual (detailed) - Network Guide)

  • Page 78: Other Care

    Maintenance Other care Inside of the projector Caring for the lens Caring for the cabinet and remote control WARNING CAUTION...

  • Page 79: Troubleshooting

    Troubleshooting WARNING Related messages Message Description There is no input signal. NO INPUT IS DETECTED The horizontal or vertical frequency of the input signal SYNC IS OUT OF RANGE kHz fV The internal temperature is rising. CHECK THE AIR FLOW REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK.

  • Page 80: Regarding The Indicator Lamps

    Troubleshooting Regarding the indicator lamps POWER LAMP TEMP Description indicator indicator indicator The projector is in a standby state. Orange Blinking The projector is warming up. Green The projector is in an on state. Green Blinking The projector is cooling down. Orange The projector is cooling down.

  • Page 81: Shutting The Projector Down

    Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Blinking Green blinking in There is a possibility that the interior portion has become overcooled. Green blinking in Blinking in At least 1 Power ON schedule is saved to the...

  • Page 82: Phenomena That May Be Easy To Be Mistaken For Machine Defects

    Troubleshooting Phenomena that may be easy to be mistaken for machine defects Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Either there is no lamp and/or lamp cover, or either The signal cables are not correctly connected.
  • Page 83 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. The MUTE function is working. The AUDIO/SPEAKER setting is not correct. The lens cover is attached.
  • Page 84 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Color settings are not correctly adjusted. COLOR SPACE setting is not suitable. The brightness and/or contrast are adjusted to an The WHISPER function is working.
  • Page 85 Item Computer input port Audio input/output port Computer output port Others Video input port Lamp: Wireless network card:...
  • Page 87 Projector CP-X308 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. Live Mode Quick connection to your network Web control PC-LESS Presentation WARNING NOTE • The information in this manual is subject to change without notice. •...
  • Page 88 Content About this manual... 1 ..54 3.7.1 . . 54 Content ....2 .

  • Page 89: Caution

    Caution [Restriction in terms of inserts or pulls storage media and wireless network card] MIU Menu in the User’s Manual (detailed) – Operating Guide CAUTION aware of the following: complete loss of communication. Country or Region Available Channel Japan 1 to 11 1 to 11 Taiwan 1 to 11...
  • Page 90 Caution 0560...

  • Page 91: Main Functions

    1. Main functions 1.1 Live Mode (Project images from PC)

  • Page 92: Quick Connection To Your Network

    1. Main functions 1.2 Quick connection to your network 1) Quick connection by the Passcode 3) Connection by the history record for the network projector to your network.
  • Page 93 1. Main functions...
  • Page 94 1. Main functions 1.4 PC-LESS Presentation (Display the images stored in SD memory card/USB memory.) [Supported storage media] NOTE...
  • Page 95 1. Main functions 1.4 PC-LESS Presentation (Display the images stored in SD memory card/USB memory.) (continued) NOTE setting is Japanese. is NOT Japanese.

  • Page 96: Equipment Connection And Network Setting

    2. Equipment connection and network setting 2.1 Required equipment preparation the network. 2.2 Quick connection...

  • Page 97: Network Settings

    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - manually. 2.3.1 Equipments connection 2.3.2 Network settings...
  • Page 98 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued)
  • Page 99 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) [About IP address] NOTE...

  • Page 100: Internet Option" Setting

    2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2.3.3 “Internet Option” setting Click Click...
  • Page 101 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2.3.4 Check connection...

  • Page 102: Preparation For Wireless Lan Connection

    2. Equipment connection and network setting 2.4 Manual network connection setting –Wireless LAN manually. 2.4.1 Preparation for wireless LAN connection access point to communicate. Using an SD card of the User’s Manual (concise) ).

  • Page 103: Wireless Lan Connection Set Up

    2. Equipment connection and network setting 2.4 Manual network connection setting –Wireless LAN (continued) 2.4.2 Wireless LAN connection set up Wireless LAN initial settings for the projector is as follows. menu on the projector. Refer to the item 4.1.3 Network Settings MIU Menu in the User's Manual (detailed) –...
  • Page 104 2. Equipment connection and network setting 2.4 Manual network connection setting –Wireless LAN (continued) [Add]...
  • Page 105 2. Equipment connection and network setting 2.4 Manual network connection setting –Wireless LAN (continued) NOTE...

  • Page 106: Using The Live Mode

    3. Using the Live Mode The outline of the process is as follows. 1) Install the “Live Viewer 3” ( 2) Quick Connection to the network ( 4) Start the Live Mode (...
  • Page 107 3. Using the Live Mode 3.1 Outline of the Live Mode 3.1.1 Display mode...
  • Page 108 3. Using the Live Mode 3.1 Outline of the Live Mode (continued) 3.1.2 Presenter mode 3.1.3 Display User Name...
  • Page 109 3. Using the Live Mode 3.2 Install “Live Viewer 3” the projector through the network. 3.2.1 Minimum PC hardware and software requirement NOTE NOTE...
  • Page 110 3. Using the Live Mode 3.2 Install “Live Viewer 3” (continued) 3.2.2 Software Installation Procedure appear as shown on the right. Press [Next]. NOTE [OK]. [Cancel] [Yes]. appears. Press [Next]. NOTE [Browse] [Next] [Next].
  • Page 111 3. Using the Live Mode 3.2 Install “Live Viewer 3” (continued) [Finish]. This completes the software installation. Then your [Start] button on 3.2.3 Version of the “Live Viewer ” software Models Live Viewer Version 2.01 2.20...

  • Page 112: Quick Connection To The Network

    3. Using the Live Mode 3.3 Quick connection to the network choose one that meets to your system. 3.3.1 Starting the “Live Viewer 3” 3.3.2 Selecting the connection mode. [trouble shooting] screen resolution. [Yes]. [No]. If you click [Yes] If you click [No] NOTE...
  • Page 113 3. Using the Live Mode 3.3 Quick connection to the network (continued) 3.3.2 Selecting the network connection mode like to use. There are 3 options in the menu. • Wireless LAN Selecting either the wireless LAN or wired LAN below. Selecting the My Connection Selecting either the wireless LAN or wired LAN is shown in the menu.
  • Page 114 3. Using the Live Mode 3.3 Quick connection to the network (continued) [OK] [Yes]. [No] but the projector may not be able to network. • If you put a check mark in the [Allow communication with LiveView3 by adding it to the Exceptions list] Connecting to the network NOTE •...
  • Page 115 3. Using the Live Mode 3.3 Quick connection to the network (continued) Selecting the My Connection [My Connection] [Connect]. projector. NOTE [trouble shooting] changes. authority. [OK] to return to the screen to select 3.3.1 Starting the “Live Viewer 3”.
  • Page 116 3. Using the Live Mode 3.3 Quick connection to the network (continued) [Yes] destination [No] to return to the screen to select the network connection...

  • Page 117: History Connection

    3. Using the Live Mode 3.3 Quick connection to the network (continued) 3.3.3 Connecting to the network There are some options to connect to the network. Enter PassCode [Enter PassCode] [NEXT]. Passcode connection [NEXT]. • • History History connection [History]. •...

  • Page 118: Passcode Connection

    3. Using the Live Mode 3.4 Passcode connection network. 3.4.1 Getting the Passcode NOTE Method 1 the projector to show the menu on screen. cursor button to enter the item. to enter the item. cursor button.
  • Page 119 3. Using the Live Mode 3.4 Passcode connection (continued) Method 2 the projector to show the menu on screen. cursor button to enter the item. to enter the item. NOTE signal. •...
  • Page 120 3. Using the Live Mode 3.4 Passcode connection (continued) 3.4.2 Entering the Passcode If you select [Enter PassCode] at the item [Connect] to start the connection to the projector. If you click [Back] NOTE [trouble shooting] [Back] to return to the “Please enter...
  • Page 121 3. Using the Live Mode 3.4 Passcode connection (continued) changes. authority. [OK] go back to the item 3.3.3 Connecting to the network 3.3.1 Starting the “Live Viewer 3“ Following the instruction by the network [Connect]. [Reset]. NOTE is currently not in use.
  • Page 122 3. Using the Live Mode 3.4 Passcode connection (continued) The message comes up when the network [Exit] on the main menu to go back to the item 3.3.3 Connecting to the network another network connection. [Yes] destination [No] on the main menu to go back to the item 3.3.3 Connecting to the network...
  • Page 123 3. Using the Live Mode 3.4 Passcode connection (continued) Wireless LAN *3: ********** *4: 255.255.255.128 [Connect]. connection to your destination The encryption key is always shown as “ ********** ”.
  • Page 124 3. Using the Live Mode 3.4 Passcode connection (continued) The projector connected to an access point by a LAN cable *2: ********** *4: 255.255.255.128 [Connect]. to check the encryption key that is set in the projector. The encryption key is always shown as “ ********** ”.
  • Page 125 3. Using the Live Mode 3.4 Passcode connection (continued) The projector connected to an access point by the wireless LAN the projector. *1 *3: ********** *4: 255.255.255.128 [Connect]. The encryption key is always shown as “ ********** ”.
  • Page 126 3. Using the Live Mode 3.4 Passcode connection (continued) Wired LAN projector. *1: 255.255.255.128 [Connect]. connection to your destination NOTE the projector to show the menu on screen. cursor button to enter the item. to enter the item. cursor button.
  • Page 127 3. Using the Live Mode There are 3 options for the manual • History with the projector. [Connect]. connection to your destination NOTE mouse.
  • Page 128 3. Using the Live Mode 3.5.2 History connection settings when connecting to the projector as projector. [History]. [Connect]. automatically. NOTE...
  • Page 129 3. Using the Live Mode All setting for the network connection between Manually]. Wireless LAN Wired LAN...
  • Page 130 3. Using the Live Mode *2: ********** [Next]. the projector. *1 [Connect]. The encryption key is always shown as “ ********** ”.
  • Page 131 3. Using the Live Mode The projector connected to an access point by a LAN cable *2: ********** [Next]. the projector. *3 [Connect]. to check the encryption key that is set in the projector. The encryption key is always shown as “ ********** ”.
  • Page 132 3. Using the Live Mode The projector connected to an access point by the wireless LAN *2: ********** [Next]. the projector. *3 [Connect]. to check the encryption key that is set in the projector. The encryption key is always shown as “ ********** ”.
  • Page 133 3. Using the Live Mode Wired LAN projector. *1 [Connect]. [trouble shooting] changes. authority. [OK] on the main menu 3.3.3 Connecting to the network 3.3.1 Starting the “Live Viewer 3”...
  • Page 134 3. Using the Live Mode Following the instruction by the network [Connect]. [Reset]. NOTE is currently not in use. The message comes up when the network [Exit] on the main menu to go back to the item 3.3.3 Connecting to the network...
  • Page 135 3. Using the Live Mode another network connection. [Yes] destination [No] on the main menu to go back to the item 3.3.3 Connecting to the network...
  • Page 136 3. Using the Live Mode 3.6.1 Connection and transmission the screen. [Yes] Refer to the item 3.6.3 Setting the Live Mode [No] 3” main menu. [Register this setting to My Connection]. [trouble shooting] [OK]...
  • Page 137 3. Using the Live Mode Presentation. [Yes] [No] [Yes] [No] input signal. [Yes] [No]...
  • Page 138 3. Using the Live Mode 3.6.2 Connection error [OK] on the main menu to go back to the item 3.3.3 Connecting to the network NOTE item 3.3 Quick connection to the network [trouble shooting] same time. [OK] connect to the network.
  • Page 139 3. Using the Live Mode 3.6.3 Setting the Live Mode from Web Remote Control on a web browser button. the projector to show the menu on screen. MIU Menu in the User’s Manual (detailed) – Operating Guide from MY BUTTON function the projector to show the menu on screen.
  • Page 140 3. Using the Live Mode 3.7 Start the “Live Viewer 3” 3.7.1 Main menu and Operating buttons 1) Menu Type screen. Easy Type Advanced Type 2) Operating buttons Starting Capture button Stop button NOTE...
  • Page 141 3. Using the Live Mode 3.7 Start the “Live Viewer 3” (continued) Hold button Connect button Option button Information button Close button Minimize button menu will be shown on screen. Connected Not connected Hold Fig. 3.7.1 b Task tray Icon...
  • Page 142 3. Using the Live Mode 3.7 Start the “Live Viewer 3” (continued) 3.7.2 Displaying the status Indicator Status Note The network connection to the projector is projector. The network connection to the projector is shown. Status Status icon NOTE...
  • Page 143 3. Using the Live Mode 3.7 Start the “Live Viewer 3” (continued) 3.7.3 Switching the display mode button on the main menu. screen. NOTE the MIU Menu in the User’s Manual (detailed) – Operating Guide...

  • Page 144: Option Menu

    3. Using the Live Mode 3.7 Start the “Live Viewer 3” (continued) 3.7.4 Option menu Optimize Performance Transmission speed Image quality The screen on the projector is rewritten slower because the Cursor Emulation...
  • Page 145 3. Using the Live Mode 3.7 Start the “Live Viewer 3” (continued) Presenter Mode NOTE The user name that is up to 20 letters can be input by using alphanumeric characters. whose image is currently on the screen. MIU Menu in the User’s Manual (detailed) – Operating Guide...
  • Page 146 3. Using the Live Mode [New]. network connection. click [Clear]. [OK] [Cancel]. [OK]. NOTE...
  • Page 147 3. Using the Live Mode [Edit]. If you want to clear all information in the [Clear]. [OK] [Cancel]. [OK]. NOTE...
  • Page 148 3. Using the Live Mode 3.8.4 Registering My Connection [My Connection]. the list. [OK] [Cancel]. NOTE [OK].
  • Page 149 3. Using the Live Mode If you wish to use the current connection [Register this setting to My Connection]. [OK]. NOTE...

  • Page 150: Management With Web Browser Software

    4. Management with Web browser software browser software. E-mail Alerts Projector Management using SNMP Event Scheduling e-SHOT (Still Image Transfer) Display Command Control via the Network...
  • Page 151 4. Management with Web browser software browser NOTE...

  • Page 152: Network Information

    4. Management with Web browser software Item Administrator User Network Information Network Settings settings. Port Settings communication port settings. Mail Settings Alert Settings warning alerts. Schedule Settings settings. time settings. Security Settings Projector Control Remote Control Projector Status projector status. Network Restart connection.
  • Page 153 4. Management with Web browser software 4.1.1 Logon Example [Logon]. Item Password <blank> <blank>...
  • Page 154 4. Management with Web browser software 4.1.2 Network Information Item Projector Name IP Address Subnet Mask MAC Ethernet NOTE MAC Wireless MIU Menu in the User’s Manual (detailed)) – Operating Guide Firmware Version...
  • Page 155 4. Management with Web browser software 4.1.3 Network Settings Item Network Mode IP Address Subnet Mask The length of the Projector Name can be up to 64 Projector Name The length of the sysLocation can be up to 255 alphanumeric sysLocation (SNMP) sysContact (SNMP)
  • Page 156 4. Management with Web browser software Item Wireless Mode NOTE (Communication channel) Speed (Communication speed) Encryption WEP Key WPA Passphrase [Custom] rules below. [Apply] NOTE clicking [Network Restart] on the main menu.
  • Page 157 4. Management with Web browser software 4.1.4 Port Settings Item Network Control Port1 (Port:23) Port open [Enable] [Enable] Authentication this port. Network Control Port2 Port open [Enable] [Enable] Authentication this port. SNMP Port Port open [Enable] Trap address SMTP Port Port open [Enable] [Apply]...
  • Page 158 4. Management with Web browser software 4.1.5 Mail Settings Item [Enable] Send mail SMTP Server IP Address Network Settings to 255 characters. Sender E-mail address alphanumeric characters. can also specify [TO] or [CC] Recipient E-mail address characters. [Apply] NOTE [Send Test Mail] [Send Test Mail].
  • Page 159 4. Management with Web browser software 4.1.6 Alert Settings Alert Item Cover Error Fan Error The cooling fan is not operating. Lamp Error There is a possibility that the interior portion has become Temp Error Air Flow Error The internal temperature is rising. Lamp Time Error There is a possibility that the interior portion has become Cold Error...
  • Page 160 4. Management with Web browser software The Alert Items are shown below. Setting Item Alarm Time SNMP Trap [Enable] [Enable] Send Mail Cold Start Authentication Failure The length of the subject line can be up to 255 alphanumeric Mail Subject characters.
  • Page 161 4. Management with Web browser software 4.1.7 Schedule Settings Item Sunday Monday Tuesday Wednesday Thursday Friday Saturday...
  • Page 162 4. Management with Web browser software Item Schedule [Enable] Schedule List Item [Enable] Schedule Schedule List [Apply] [Add] items. Item Time Command [Parameter] Power Input Source [Register] [Reset]...
  • Page 163 4. Management with Web browser software 4.1.8 Date/Time Settings Item format. Current Time hour:minute:second format. [ON] the following items. Start Month Week hour Time minute Month Week hour Time minute...
  • Page 164 4. Management with Web browser software Item Time difference manager. [ON] SNTP SNTP Server IP Network Address Settings to 255 characters. Cycle hours:minutes [Apply] NOTE...
  • Page 165 4. Management with Web browser software 4.1.9 Security Settings Item Administrator authority characters. Administrator Password characters. Re-enter Administrator Password User authority characters. User Password characters. Re-enter User Password...
  • Page 166 4. Management with Web browser software Item Network Control control. Authentication Password Re-enter Authentication Password SNMP Community name be up to 64 alphanumeric characters. User to 32 alphanumeric characters. Password 32 alphanumeric characters. Re-enter Password [Apply NOTE...
  • Page 167 4. Management with Web browser software 4.1.10 Projector Control The items shown in the table below can be NOTE [Refresh] button. Item Main Power Input Source Picture Mode Mute Freeze Magnify Picture Brightness Contrast Color Temp Color Tint Sharpness MyMemory Save MyMemory Recall...
  • Page 168 4. Management with Web browser software Item Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR Color Space Component C-Video Format S-Video Format Frame Lock- Computer1 Frame Lock- Computer2 Computer in-1 Computer in-2 Setup Auto Keystone...
  • Page 169 4. Management with Web browser software Item Volume Speaker Audio-Computer1 Audio-Computer2 Audio-Video Audio-S-Video Audio-Component Audio-MIU Screen Language Menu Position V Menu Position H Blank Startup MyScreen Lock Message Option Auto Search Auto Keystone Auto on Auto off My Button-1 My Button-2 Remote Freq.
  • Page 170 4. Management with Web browser software The Service item in the Projector Control menu is shown only when you logon with the The items shown in the table below can be Projector Control menu. [Quit Presenter Mode]. Item Service Quit Presenter Mode...
  • Page 171 4. Management with Web browser software 4.1.11 Remote Control projector. browser at the same time. It may cause some operational errors in the projector. Item POWER COMPUTER BLANK FREEZE MUTE MENU LEFT ENTER RESET...
  • Page 172 4. Management with Web browser software Item THUMBNAIL NOTE again. • When [POWER] [OK] [CANCEL]. •...
  • Page 173 4. Management with Web browser software 4.1.12 Projector Status Item Error Status Lamp Time Filter Time Power Status Input Status Mute Freeze...

  • Page 174: Logoff

    4. Management with Web browser software 4.1.13 Network Restart Item Restart NOTE clicking [Restart] button to log on again. 4.1.14 Logoff When [Logoff]...
  • Page 175 4. Management with Web browser software 4.2 E-mail Alerts NOTE power. Mail Settings ( through a web browser. [Logon]. [Port Settings] on the main menu. [Enable] [Apply] [Mail Settings] Settings [Apply] NOTE [Send Test Mail] button in [Mail Settings] Time <Testing time>...
  • Page 176 4. Management with Web browser software 4.2 E-mail Alerts (Continued) [Alert Settings] for further information. [Apply]...

  • Page 177: Projector Management Using Snmp

    4. Management with Web browser software 4.3 Projector Management using SNMP to use this function. NOTE SNMP Settings ( [Logon]. [Port Settings] on the main menu. [Enable] SNMP Port [Security Settings] on the main menu. [SNMP] [Alert Settings] [Enable] [Enable] [Apply]...
  • Page 178 4. Management with Web browser software 4.4 Event Scheduling NOTE...
  • Page 179 4. Management with Web browser software 4.4 Event Scheduling (Continued) Schedule Settings ( [Logon]. [Schedule Settings] select [Sunday]. [Enable] [Apply] [Add] [Register] click [Cancel] button. NOTE...
  • Page 180 4. Management with Web browser software 4.4 Event Scheduling (Continued) Date/Time Settings ( [Logon]. [Apply] NOTE following the instructions on replacing the battery.
  • Page 181 4. Management with Web browser software 4.5 e-SHOT (Still Image Transfer) Display MIU Menu in User’s Manual (detailed) – Operating Guide NOTE browser. Refer to the item 4.4 Event Scheduling...

  • Page 182: Command Control Via The Network

    4. Management with Web browser software 4.6 Command Control via the Network Communication Port Command Control Settings ( [Logon]. [Port Settings] on the main menu. [Enable] Network Control Port1 (Port: 23) to [Enable] [Authentication] setting when [Enable] [Enable] [Authentication] setting when [Apply]...
  • Page 183 4. Management with Web browser software 4.6 Command Control via the Network (Continued) [Security Settings] on the main menu. [Network Control] [Apply] NOTE...
  • Page 184 4. Management with Web browser software 4.6 Command Control via the Network (Continued) Command Format Reply Error code Connection Header RS-232Ccommand Checksum 13 bytes 1 byte 1 byte...
  • Page 185 4. Management with Web browser software 4.6 Command Control via the Network (Continued) Reply Data format Connection Reply 1 byte Connection Reply 1 byte Connection Reply Error code 2 bytes 1 byte Connection Reply 2 bytes 1 byte <Projector busy reply> Connection Reply Status code...
  • Page 186 4. Management with Web browser software 4.6 Command Control via the Network (Continued) Automatic Connection Break Authentication NOTE...

  • Page 187: Pc-Less Presentation

    5. PC-LESS Presentation 5.1 Outline of the PC-LESS Presentation through the network. Thumbnail Mode Full Screen Mode Slide Show Mode...
  • Page 188 5. PC-LESS Presentation 5.1 Outline of the PC-LESS Presentation (continued) Mode [Supported storage media] NOTE time. Using a USB storage/Using an SD card in the User’s Manual (concise) [Supported format] NOTE...

  • Page 189: Thumbnail Mode

    5. PC-LESS Presentation 5.2 Thumbnail mode Thumbnail menu Thumbnail images 5.2.1 Starting the Thumbnail mode Using a USB storage/Using an SD card in the User’s Manual (concise) the projector to show the menu on screen. cursor button to enter the item. to enter the item.
  • Page 190 5. PC-LESS Presentation cursor button to perform it. The picture in Fig. 5.2 will be on screen. from a web browser software Using a USB storage/Using an SD card in the User’s Manual (concise) 11 or 16 or it. The picture in Fig. 5.2 will be on screen.

  • Page 191: Operating By Buttons Or Keys

    5. PC-LESS Presentation 5.2.2 Operating by buttons or keys Button operation Functions Web Remote in web The remote the projector browser software. control on full screen NOTE...

  • Page 192: Operation On The Thumbnail Menu

    5. PC-LESS Presentation 5.2.3 Operation on the Thumbnail menu NOTE...

  • Page 193: Full Screen Mode

    5. PC-LESS Presentation 5.3 Full Screen Mode [ENTER] Button operation *1) Web Remote Functions The remote on the in web browser control projector software. • clockwise or anticlockwise. back to the initial angle or erase the • NOTE •...
  • Page 194 5. PC-LESS Presentation 5.3 Full Screen Mode (continued) original aspect. Pattern A...

  • Page 195: Slide Show Mode

    5. PC-LESS Presentation 5.4 Slide Show Mode SHOW] Button operation Web Remote Functions The remote on the in web browser control projector software. menu. NOTE •...
  • Page 196 5. PC-LESS Presentation 5.4 Slide Show Mode (continued) NOTE “slidemode.txt” automatically. “slidemode.txt” is “slidemode.txt”...

  • Page 197: Directory Tree View

    5. PC-LESS Presentation 5.5 Directory Tree View button in the Web [ENTER] File information Tree structure...
  • Page 198 5. PC-LESS Presentation 5.5 Directory Tree View (continued) Button operation Web Remote Functions The remote on the in web browser control projector software. NOTE...
  • Page 199 5. PC-LESS Presentation 5.5 Directory Tree View (continued) [File information display] information.
  • Page 200 5. PC-LESS Presentation 5.6 “PC-LESS Presentation” error message “PC-LESS Presentation” error message list Error message Error content The Playlist file has malfunction. Illegal Playlist file. characters per line in file or...

  • Page 201: Playlist

    5. PC-LESS Presentation 5.7 Playlist “imagelistdir.txt” CAUTION...

  • Page 202: Troubleshooting

    6. Troubleshooting 6. Troubleshooting Reference Problem Likely Cause Things to Check Page Number No image The projector network settings are not then turn it on again. If you that you want simply put the projector in to connect to is nowhere new settings might not take on the list effect.
  • Page 203 6. Troubleshooting Reference Problem Likely Cause Things to Check Page Number Lots of interference in is set to “Transmission the images Turn off the cursor Two cursors cursor of the projector appear option. succession. Turn on the cursor No cursor appears 3”.
  • Page 204 Item Specifications File format Control software Corresponding protocol Network Security PC application operational environment Wireless network card...

  • Page 205: Warranty And After-Sales Service

    8. Warranty and after-sales service...
  • Page 206 Projector CP-X308 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA...
  • Page 207 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d)

  • Page 208: Monitor Out

    Connection to the ports Connection to the ports USB STORAGE DC 5V 0.5A AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO IN CONTROL S-VIDEO AUDIO IN3 COMPUTER IN1, COMPUTER IN2, MONITOR OUT D-sub 15pin mini shrink jack terminated (positive) •...

  • Page 209: Component Video

    Connection to the ports (continued) USB STORAGE DC 5V 0.5A AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO IN CONTROL S-VIDEO AUDIO IN3 COMPONENT VIDEO Cb/Pb, Cr/Pr RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p),1125i(1080i) Port Signal Cb/Pb Cr/Pr S-VIDEO Mini DIN 4pin jack...

  • Page 210: Audio Out

    Connection to the ports (continued) USB STORAGE DC 5V 0.5A AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO IN CONTROL S-VIDEO AUDIO IN3 AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack AUDIO IN3 RCA jack x2 AUDIO OUT Ø3.5 stereo mini jack To input SCART RGB signal;...
  • Page 211 Connection to the ports (continued) USB STORAGE DC 5V 0.5A AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO IN CONTROL S-VIDEO AUDIO IN3 USB B type jack Signal 1 +5V 2 - Data 3 + Data 4 Ground CONTROL D-sub 9pin plug •...
  • Page 212 Connection to the ports (continued) USB STORAGE DC 5V 0.5A AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO IN CONTROL S-VIDEO AUDIO IN3 USB STORAGE USB A type jack Signal 1 +5V 2 - Data 3 + Data 4 Ground SD card slot SD card slot Signal...

  • Page 213: Communications Setting

    RS-232C Network Communication RS-232C Network Communication CONTROL port RS-232C cable (cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS...
  • Page 214 RS-232C Network Communication (continued) Requesting projector status (Get command) (1) Send the following request code from the PC to the projector. Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set command) (1) Send the following setting code from the PC to the projector.
  • Page 215 Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
  • Page 216 Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high 3. Command data Command data chart byte_0 byte_1...
  • Page 217 Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’...
  • Page 218 Command Control via the Network (continued) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’...
  • Page 219 RS-232C communication / Network command table RS-232C communication / Network command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 220 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 steps gray scale BE EF 06 00 6B FB...
  • Page 221 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00...
  • Page 222 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00...
  • Page 223 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK – TURN OFF BE EF 06 00 3B C2 01 00 50 30 00 00 COMPUTER1 TURN ON BE EF...
  • Page 224 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code SPEAKER TURN ON BE EF 06 00 FE D4 01 00 1C 20 01 00 TURN OFF BE EF 06 00 6E D5...
  • Page 225 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00...
  • Page 226 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO KEYSTONE TURN OFF BE EF 06 00 EA D1 01 00 0F 20 00 00 TURN ON BE EF 06 00...
  • Page 227 RS-232C communication / Network command table (continued) RS-232C communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code MAGNIFY BE EF 06 00 7C D2 02 00 07 30 00 00 Increment BE EF 06 00 1A D2 04 00...
  • Page 228 Hitachi, Ltd. Japan 292 Yoshida-cho Totsuka-ku, Yokohama-city Kanagawa 244-0817 HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens GREECE SL6 8ZE Tel: 1-6837200 UNITED KINGDOM...

Table of Contents