Table of Contents
Advertisement
8. Holding Tray Assembly (overlay, re-pick up)
Cause
Step
Holding tray
paper deflecting
plate
Holding tray
paper deflecting
plate solenoid
(SL8)
Holding tray
reversing clutch
(CL4)
9. Holding Tray Feeding Assembly
Cause
Step
Holding tray
feeding clutch
(CL1), Holding
tray feeding
clutch (CL2)
Holding tray
feeding assem-
bly 1 paper
sensor (PS8),
Holding tray
feeding assem-
bly 2 paper
sensor (PS9)
COPYRIGHT © 1997 CANON INC.
Checks
1
Perform the steps under 7.
"Holding Tray." Is the problem cor-
rected?
2
Is there deformation or scratches
on the holding tray paper deflect-
ing plate?
3
Does the holding tray paper
deflecting plate operate at the cor-
rect timing?
4
Does the roller rotation reverse at
the correct timing?
Checks
1
Is the holding tray feeding assem-
bly set correctly?
2
Does the paper move correctly
inside the holding tray feeding
assembly?
3
Are the holding tray feeding
assembly 1 paper sensor (PS8)
and the holding tray feeding
assembly 2 paper sensor (PS9)
normal?
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
YES/NO
Action
YES
End.
YES
Replace the paper
deflecting plate.
NO
Replace the solenoid
(SL8).
NO
Check the wiring from
the DC controller PCB to
the holding tray revers-
ing clutch (CL4); if nor-
mal, replace the clutch
(CL4).
YES/NO
Action
NO
Set it correctly.
NO
Replace the clutch (CL1
or CL2).
NO
Replace the sensor (PS8
or PS9).
11-123
- Quick Links:
- Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
