hit counter code
HP Pro 2000 - Microtower PC Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. Pro 2000 - Microtower PC
  6. Maintenance and service manual

HP Pro 2000 - Microtower PC Maintenance And Service Manual

Maintenance & service guide: hp pro 2000/2080 business pc
Hide thumbs Also See for Pro 2000 - Microtower PC:
Table of Contents

Advertisement

Quick Links

Maintenance & Service Guide
HP Pro 2000 Business PCs
HP Pro 2080 Business PCs

Advertisement

Table of Contents
loading

Related Manuals for HP Pro 2000 - Microtower PC

Summary of Contents for HP Pro 2000 - Microtower PC

  • Page 1 Maintenance & Service Guide HP Pro 2000 Business PCs HP Pro 2080 Business PCs...
  • Page 2 © Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

  • Page 3: About This Book

    About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
  • Page 4 About This Book...

  • Page 5: Table Of Contents

    Table of contents 1 Product Features ............................1 Standard Configuration Features ......................1 Serviceability Features ......................... 2 Front Panel Components ........................3 Media Card Reader Components ......................4 Rear Panel Components ........................5 2 Installing and Customizing the Software ...................... 6 Installing the Operating System ......................
  • Page 6 Generating Static ....................... 17 Preventing Electrostatic Damage to Equipment ..............18 Personal Grounding Methods and Equipment ..............18 Grounding the Work Area ....................19 Recommended Materials and Equipment ................19 Operating Guidelines .......................... 20 Routine Care ............................21 General Cleaning Safety Precautions ................21 Cleaning the Computer Case ....................
  • Page 7 Power Switch/LED Assembly ......................54 System Fan ............................55 Heat sink assembly ..........................56 Processor ............................57 Power Supply ............................. 58 System Board ............................. 60 Battery ..............................61 Type 1 Battery Holder ......................62 Type 2 Battery Holder ......................62 Type 3 Battery Holder ......................
  • Page 8 Solving Hard Drive Problems ......................84 Solving Media Card Reader Problems ....................85 Solving Display Problems ........................87 Solving Audio Problems ........................91 Solving Printer Problems ........................92 Solving Keyboard and Mouse Problems .................... 94 Solving Hardware Installation Problems ..................... 96 Solving Network Problems .........................

  • Page 9: Product Features

    Product Features Standard Configuration Features HP Pro Business PC features may vary depending on the model. For a complete listing of the hardware and software installed in the computer, run the diagnostic utility (included on some computer models only). Instructions for using the utility are provided in the Troubleshooting Guide. Figure 1-1 HP Pro 2000 Standard Configuration Features...

  • Page 10: Serviceability Features

    Figure 1-2 HP Pro 2080 NOTE: The drive configuration shown above may be different than your computer model. Serviceability Features The Microtower computer includes features that make it easy to upgrade and service. A Torx T-15 or flat blade screwdriver is needed for many of the installation procedures described in this guide. Chapter 1 Product Features...

  • Page 11: Front Panel Components

    Front Panel Components Drive configuration may vary by model. Figure 1-3 Front Panel Components Table 1-1 Front Panel Components 5.25-inch Optical Drive Hard Drive Activity Light 5.25-inch Optical Drive Bay Optical Drive Eject Button 3.5-inch Media Card Reader (optional) Microphone Connector Recovery/Reset Button Headphone Connector Dual-State Power Button...

  • Page 12: Media Card Reader Components

    Media Card Reader Components The media card reader is an optional device available on some models only. Refer to the following illustration and table to identify the media card reader components. Figure 1-4 Media Card Reader Components Table 1-2 Media Card Reader Components Slot Media ●...

  • Page 13: Rear Panel Components

    Rear Panel Components Figure 1-5 Rear Panel Components Table 1-3 Rear Panel Components Mouse PS/2 connector Keyboard PS/2 connector VGA Monitor Connector Serial connector RJ-45 Network Connector DVI Connector Line-In Audio Connector (blue) Universal Serial Bus (USB) Ports Voltage Switch Microphone Connector (pink) Power Cord Connector Line-Out Connector for powered audio...

  • Page 14: Installing And Customizing The Software

    Installing and Customizing the Software If your computer was not shipped with a Microsoft operating system, some portions of this documentation do not apply. Additional information is available in online help after you install the operating system. NOTE: If the computer was shipped with Windows Vista or Windows 7 loaded, you will be prompted to register the computer with HP Total Care before installing the operating system.

  • Page 15: Installing Or Upgrading Device Drivers (Windows Systems)

    Click on the Windows Update link. In Windows Vista and Windows 7, the Windows Update screen appears. Click view available updates and make sure all critical updates are selected. Click the Install button and follow the instructions on the screen. In Windows XP, you will be directed to the Microsoft Windows Update Web site.

  • Page 16: Computer Setup (F10) Utility

    Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change factory default settings. ● Set the system date and time. ● Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.
  • Page 17 Six menu headings appear on the Computer Setup Utility screen: ● Main ● Advanced ● Boot ● Power ● PC Health ● Exit Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter.

  • Page 18: Computer Setup-Main

    Computer Setup—Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3-2 Computer Setup—Main Option Description System Information Allows you to view the following system information: ● Product Name (view only) ● SKU Number (view only) ●...

  • Page 19: Computer Setup-Advanced

    Table 3-2 Computer Setup—Main (continued) Option Description Halt On Allows you to set POST error behavior to: ● No Errors ● All Errors ● All But Keyboard POST Delay Allows you to set a POST delay to: ● 0 seconds ●...

  • Page 20: Computer Setup-Boot

    Table 3-3 Computer Setup—Advanced (continued) Option Description Onboard LAN Boot Disables/enables the boot ROM of the onboard LAN chip. Onboard Serial Port 1 Allows you to select a setting for the onboard serial port: ● Disabled ● 3F8/IRQ4 ● 2F8/IRQ3 ●...

  • Page 21: Computer Setup-Power

    Table 3-4 Computer Setup—Boot (continued) Option Description Set Supervisor Allows you to establish a password to control access to Computer Setup. Password BIOS Write Protection Disables/enables BIOS upgrading. Computer Setup—Power NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

  • Page 22: Computer Setup-Exit

    Table 3-6 Computer Setup—PC Health (continued) Option Description Current CPU Fan (view only) Speed Current System Fan (view only) Speed Computer Setup—Exit Table 3-7 Computer Setup—Exit Option Description Save Changes and Exit Allows you to save current settings and exit Computer Setup. Discard Changes and Allows you to exit Computer Setup without saving changes.

  • Page 23: Serial Ata (Sata) Drive Guidelines And Features

    Serial ATA (SATA) Drive Guidelines and Features NOTE: HP only supports the use of SATA hard drives on these models of computer. No Parallel ATA (PATA) drives are supported. SATA Hard Drives Serial ATA Hard Drive Characteristics Number of pins/conductors in data cable Number of pins in power cable Maximum data cable length 39.37 in (100 cm)

  • Page 24: Smart Ata Drives

    SMART ATA Drives The Self Monitoring Analysis and Recording Technology (SMART) ATA drives for the HP Personal Computers have built-in drive failure prediction that warns the user or network administrator of an impending failure or crash of the hard drive. The SMART drive tracks fault prediction and failure indication parameters such as reallocated sector count, spin retry count, and calibration retry count.

  • Page 25: Identifying The Chassis, Routine Care, And Disassembly Preparation

    Identifying the Chassis, Routine Care, and Disassembly Preparation This chapter provides general service information for the computer. Adherence to the procedures and precautions described in this chapter is essential for proper service. CAUTION: When the computer is plugged into an AC power source, voltage is always applied to the system board.

  • Page 26: Preventing Electrostatic Damage To Equipment

    Removing DIPs* from vinyl tray 2,000 V 4,000 V 11,500 V Removing DIPs* from Styrofoam 3,500 V 5,000 V 14,500 V Removing bubble pack from PCB 7,000 V 20,000 V 26,500 V Packing PCBs in foam-lined box 5,000 V 11,000 V 21,000 V *These are then multi-packaged inside plastic tubes, trays, or Styrofoam.

  • Page 27: Grounding The Work Area

    Grounding the Work Area To prevent static damage at the work area, use the following precautions: ● Cover the work surface with approved static-dissipative material. Provide a wrist strap connected to the work surface and properly grounded tools and equipment. ●...

  • Page 28: Operating Guidelines

    Operating Guidelines To prevent overheating and to help prolong the life of the computer: ● Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. ● Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow.

  • Page 29: Routine Care

    Routine Care General Cleaning Safety Precautions Never use solvents or flammable solutions to clean the computer. Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then use the cloth on the component. Always unplug the computer when cleaning with liquids or damp cloths.

  • Page 30: Cleaning The Monitor

    ● If you remove a key, use a specially designed key puller to prevent damage to the keys. This tool is available through many electronic supply outlets. CAUTION: Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are improperly removed or installed, the keyboard may not function properly.

  • Page 31: Screws

    ● Diagnostics software ● HP tamper-resistant T-15 wrench (Smart Cover FailSafe Key, PN 166527-001) or HP tamper- resistant bits (Smart Cover FailSafe Key, PN 166527-002) Screws The screws used in the computer are not interchangeable. They may have standard or metric threads and may be of different lengths.

  • Page 32: Lithium Coin Cell Battery

    Lithium Coin Cell Battery The battery that comes with the computer provides power to the real-time clock and has a minimum lifetime of about three years. See the appropriate removal and replacement chapter for the chassis you are working on in this guide for instructions on the replacement procedures.

  • Page 33: Removal And Replacement Procedures Microtower (Mt) Chassis

    Removal and Replacement Procedures Microtower (MT) Chassis Adherence to the procedures and precautions described in this chapter is essential for proper service. After completing all necessary removal and replacement procedures, run the Diagnostics utility to verify that all components operate properly. NOTE: Not all features listed in this guide are available on all computers.

  • Page 34: Access Panel

    Access Panel Prepare the computer for disassembly (Preparation for Disassembly on page 25). Loosen the screw (1) that secures the access panel to the computer chassis. Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit. NOTE: You may want to lay the computer on its side to install internal parts.

  • Page 35: Front Bezel

    Front Bezel Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page 26). Press outward on the three latches on the right side of the bezel (1), then rotate the right side of the bezel off the chassis (2) followed by the left side.

  • Page 36: Bezel Blanks

    Bezel Blanks On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank: Remove the front bezel (Front Bezel on page 27). To remove the lower 5.25-inch bezel blank, gently twist and pull on the bezel blank until it breaks free from the front bezel (1), then discard the bezel blank.

  • Page 37: Memory

    Memory The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3- SDRAM) dual inline memory modules (DIMMs). DDR3-SDRAM DIMMs The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum memory support, you can populate the system board with up to 8 GB of memory configured in a high- performing dual channel mode.

  • Page 38: Populating Dimm Sockets

    Populating DIMM Sockets There are four DIMM sockets on the system board, with two sockets per channel. Populate the DIMM sockets in the following order: DIMM1 then DIMM2 Figure 6-4 DIMM Socket Locations Table 6-1 DIMM Socket Locations Item Description Socket Color Insertion Order DIMM1 socket, Channel A...

  • Page 39: Installing Memory Modules

    ● The system will operate in flex mode if the total memory capacity of the DIMMs in Channel A is not equal to the total memory capacity of the DIMMs in Channel B. In flex mode, the channel populated with the least amount of memory describes the total amount of memory assigned to dual channel and the remainder is assigned to single channel.
  • Page 40 Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Figure 6-5 Installing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.

  • Page 41: Expansion Cards

    Expansion Cards The HP Pro 2000/2080 has two PCI expansion slots, one PCI Express x1 expansion slot, and one PCI Express x16 expansion slot. The expansion slots accommodate full-height or half-height expansion cards. Figure 6-6 Expansion Slot Locations Table 6-2 Expansion Slot Locations Item Description...
  • Page 42 On the rear of the computer, a slot cover lock secures the expansion card brackets in place. Remove the screw from the slot cover lock then slide the slot cover lock up to remove it from the chassis. Figure 6-7 Opening the Slot Cover Lock Before installing an expansion card, remove the expansion slot cover or the existing expansion card.
  • Page 43 If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket then away from the inside of the chassis to release it from the chassis frame.
  • Page 44 If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis.

  • Page 45: Cable Management

    Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. Replace the computer access panel. Reconnect the power cord and any external devices, then turn on the computer. Lock any security devices that were disengaged when the access panel was removed. Reconfigure the computer, if necessary.

  • Page 46: Cable Connections

    Grasp the cable end of the connector and pull it straight up (2). CAUTION: Always pull the connector - NEVER pull on the cable. Pulling on the cable could damage the cable and result in a failed power supply. Cable Connections System board connectors are color-coded to make it easier to find the proper connection.

  • Page 47: Drives

    Drives The computer supports up to five drives that may be installed in various configurations. This section describes the procedure for replacing or upgrading the storage drives. A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. Drive Positions NOTE: Front bezel appearance may vary.

  • Page 48: Installing Additional Drives

    Installing Additional Drives When installing additional drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board. ● Connect the first SATA optical drive to the white SATA connector on the system board. ●...

  • Page 49: System Board Drive Connections

    System Board Drive Connections Refer to the following illustration and table to identify the system board drive connectors. Figure 6-15 System Board Drive Connections Table 6-3 System Board Drive Connections System Board Connector System Board Label Color SATA1 SATA1 dark blue SATA2 SATA2 white...

  • Page 50: Removing An Optical Drive

    Removing an Optical Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove an optical drive: Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page 26).

  • Page 51: Installing An Optical Drive Into The 5.25-Inch Drive Bay

    NOTE: To install an optical drive, refer to Installing an Optical Drive into the 5.25-inch Drive Bay on page Installing an Optical Drive into the 5.25-inch Drive Bay To install an optional 5.25-inch optical drive: Prepare the computer for disassembly (Preparation for Disassembly on page 25).

  • Page 52: Removing An External 3.5-Inch Drive

    Connect the power cable (1) and data cable (2) to the rear of the optical drive. Figure 6-19 Connecting the Power and Data Cables Replace the front bezel and access panel. Reconnect the power cord and turn on the computer. Lock any security devices that were disengaged when the access panel was removed.

  • Page 53: Installing A Drive Into The 3.5-Inch External Drive Bay

    Remove the two retainer screws that secure the drive to the bay (1) then slide the drive forward and out of the bay (2). Figure 6-20 Removing a 3.5-inch Device (Media Card Reader Shown) Installing a Drive into the 3.5-inch External Drive Bay The 3.5-inch external drive bay on the front of the computer can be configured with a media card reader.

  • Page 54: Removing An Internal 3.5-Inch Hard Drive

    Slide the drive in through the front of the chassis (1) until the bezel on the drive is evenly aligned with the computer front bezel and install the two M3 metric retainer screws (2) as shown in the illustration below. NOTE: Extra drive retainer screws are provided on the interior of the front bezel if needed.
  • Page 55 Remove the two screws that secure the hard drive cage to the chassis. Figure 6-22 Removing the Hard Drive Cage Screws Push down the latch on the side of the hard drive cage (1), then slide the hard drive cage away from the bottom of the chassis (2) as shown below.
  • Page 56 Lift the hard drive cage out of the chassis. Figure 6-24 Removing the Hard Drive Cage Disconnect the power cable (1) and data cable (2) from the back of the hard drive. Figure 6-25 Disconnecting the Hard Drive Cables Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis...
  • Page 57 Remove the four screws that secure the hard disk drive to the hard drive cage (1), then slide the hard disk drive out of the hard drive cage (2). Figure 6-26 Removing the Hard Drive NOTE: To install an internal 3.5-inch hard drive, refer to Installing an Internal 3.5-inch Hard Drive on page Drives...

  • Page 58: Installing An Internal 3.5-Inch Hard Drive

    Installing an Internal 3.5-inch Hard Drive Follow the steps in Removing an Internal 3.5-inch Hard Drive on page 46 to remove the hard drive cage and, if necessary, the existing hard drive. Slide the new drive into the hard disk drive cage (1), aligning the drive with the four screw holes on the cage.
  • Page 59 Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 6-28 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires.
  • Page 60 Attach the two screws that secure the hard disk drive cage to the chassis. Figure 6-30 Securing the Hard Drive Cage If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector to avoid any hard drive performance problems.

  • Page 61: Front I/O And Usb Panel Housing Assembly

    Front I/O and USB Panel Housing Assembly Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page Lay the computer on its side with the front facing toward you. Remove the front bezel (Front Bezel on page 27).

  • Page 62: Power Switch/Led Assembly

    Power Switch/LED Assembly Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page 26). Lay the computer on its side with the front facing toward you. Remove the front bezel (Front Bezel on page 27).

  • Page 63: System Fan

    System Fan Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page 26). Lay the computer on its side with the rear facing toward you. Disconnect the cable from the red/brown system board connector labeled CH_FAN1. Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan forward, and then remove the fan from the chassis.

  • Page 64: Heat Sink Assembly

    Heat sink assembly Prepare the computer for disassembly (Preparation for Disassembly on page 25). Remove the access panel (Access Panel on page 26). Lay the computer on its side with the rear facing toward you. Loosen the four captive torx T15 screws (1) that secure the heat sink to the system board. Disconnect the heat sink fan control cable (2) from the white system board connector labeled CPUFAN.

  • Page 65: Processor

    CAUTION: Heat sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the heat sink to the processor. This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board. When reinstalling an existing heat sink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor.

  • Page 66: Power Supply

    To install a new processor: Place the processor in its socket and close the retainer. Secure the locking lever. If reusing the existing heat sink, go to step 3. If using a new heat sink, go to step 6. If reusing the existing heat sink, clean the bottom of the heat sink with the alcohol pad provided in the spares kit.
  • Page 67 Remove the four screws that secure the power supply to the chassis. Inside of the unit, press the power supply release latch on the chassis base, and then lift up the rear of the power supply to disengage it from the chassis. NOTE: System board appearance may vary.

  • Page 68: System Board

    System Board When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules ● Processor ● Expansion cards To remove the system board: Prepare the computer for disassembly (Preparation for Disassembly on page 25).

  • Page 69: Battery

    NOTE: The system board in the computer may look slightly different from the one shown here. To install the system board, reverse the removal procedure. NOTE: When replacing the system board, you must also change the chassis serial number in the BIOS.

  • Page 70: Type 1 Battery Holder

    Type 1 Battery Holder Lift the battery out of its holder. Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position. Replace the computer access panel. Plug in the computer and turn on power to the computer. Reset the date and time, your passwords, and any special system setups, using Computer Setup.

  • Page 71: Type 3 Battery Holder

    Plug in the computer and turn on power to the computer. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide. Type 3 Battery Holder Pull back on the clip (1) that holds the battery in place, then remove the battery (2). Insert the new battery and position the clip back in place.

  • Page 72: Installing A Security Lock

    Installing a Security Lock The security locks displayed below and on the following pages can be used to secure the computer. HP/Kensington MicroSaver Security Cable Lock Figure 6-31 Installing a Cable Lock Padlock Figure 6-32 Installing a Padlock Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis...

  • Page 73: Hp Business Pc Security Lock

    HP Business PC Security Lock Fasten the security cable by looping it around a stationary object. Figure 6-33 Securing the Cable to a Fixed Object Thread the keyboard and mouse cables through the lock. Figure 6-34 Threading the Keyboard and Mouse Cables Installing a Security Lock...
  • Page 74 Screw the lock to the chassis using the screw provided. Figure 6-35 Attaching the Lock to the Chassis Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the lock. Use the key provided to disengage the lock. Figure 6-36 Engaging the Lock Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis...

  • Page 75: Hood Sensor

    Hood Sensor If the access panel is removed while there is still power to the computer, the hood sensor will cause the system to stop and display the Error 912 message after system reboot and will beep 5 times for 5 seconds.

  • Page 76: Hp Chassis Security Kit

    HP Chassis Security Kit An optional HP Chassis Security Kit prevents computer components from being removed through an open optical drive bay. Figure 6-37 HP Chassis Security Kit Figure 6-38 Installing the HP Chassis Security Kit Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis...

  • Page 77: Appendix A Connector Pin Assignments

    Connector Pin Assignments This appendix contains the pin assignments for many computer and workstation connectors. Some of these connectors may not be used on the product being serviced. Ethernet BNC Connector and Icon Signal Data Ground Connector and Icon Signal +5 VDC - Data + Data...

  • Page 78: Headphone

    Headphone Connector and Icon (1/8” miniphone) Signal 1 (Tip) Audio_left 1 2 3 2 (Ring) Power_Right 3 (Shield) Ground Line-in Audio Connector and Icon (1/8” miniphone) Signal 1 (Tip) Audio_In_Left 1 2 3 2 (Ring) Audio_In_Right 3 (Shield) Ground Line-out Audio Connector and Icon (1/8”...

  • Page 79: Monitor

    Monitor Connector and Icon Signal Signal Red Analog +5V (fused) Green Analog Ground Blue Analog Not used Not used DDC Serial Data Ground Horizontal Sync Ground Vertical Sync Ground DDC Serial Clock Ground Serial Interface, Powered and Non-Powered Connector and Icon Signal Carrier Detect (12V if powered) Receive Data...

  • Page 80: Dvi Connector

    DVI Connector Connector and Icon Signal Signal T.M.D.S. Data2– T.M.D.S. Data3+ T.M.D.S. Data2+ +5V Power T.M.D.S. Data2/4 Shield Ground (for +5V) T.M.D.S. Data4– Hot Pug Detect T.M.D.S. Data4+ T.M.D.S. Data0– DDC Clock T.M.D.S. Data0+ DDC Data T.M.D.S. Data0/5 Shield No Connect T.M.D.S.

  • Page 81: Pci Express

    PCI Express x1, x4, x8, and x16 PCI Express Connector Pin A Signal Signal Signal Signal Signal PRSNT1 JTAG3 PERST# PERp0 PERp1 +12V JTAG4 PERn0 PERn1 +12V JTAG5 REFCLK+ +3.3V REFCLK- RSVD JTAG2 +3.3V PERp2 PERn(2) PERn4 RSVD PERp7 RSVD PERp6 PERn7 PERp3...

  • Page 82: Pci Express

    PCI Express x1, x4, x8, and x16 PCI Express Connector Pin B Signal Signal Signal Signal Signal +12V SMDAT WAKE# +12V RSVD RSVD +3.3 V PETp2 PETp1 JTAG1 PETp0 PETn2 PETn1 SMCLK 3.3vAux PETn0 PRSNT2# PETp6 PETn7 PETp3 PETp5 PRTn6 PETn3 PETp4 PETn5...

  • Page 83: Appendix B Power Cord Set Requirements

    Power Cord Set Requirements The power supplies on some computers have external power switches. The voltage select switch feature on the computer permits it to operate from any line voltage between 100-120 or 220-240 volts AC. Power supplies on those computers that do not have external power switches are equipped with internal switches that sense the incoming voltage and automatically switch to the proper voltage.

  • Page 84: Country-Specific Requirements

    Country-Specific Requirements Additional requirements specific to a country are shown in parentheses and explained below. Country Accrediting Agency Country Accrediting Agency Australia (1) EANSW Italy (1) Austria (1) Japan (3) METI Belgium (1) CEBC Norway (1) NEMKO Canada (2) Sweden (1) SEMKO Denmark (1) DEMKO...

  • Page 85: Appendix C Troubleshooting Without Diagnostics

    Troubleshooting Without Diagnostics This chapter provides information on how to identify and correct minor problems, such as hard drive, optical drive, graphics, audio, memory, and software problems. If you encounter problems with the computer, refer to the tables in this chapter for probable causes and recommended solutions. Safety and Comfort WARNING! Misuse of the computer or failure to establish a safe and comfortable work environment...

  • Page 86: Helpful Hints

    To assist you in resolving problems online, HP Instant Support Professional Edition provides you with self-solve diagnostics. If you need to contact HP support, use HP Instant Support Professional Edition's online chat feature. Access HP Instant Support Professional Edition at: http://www.hp.com/ go/ispe.
  • Page 87 ● Be sure that all the needed device drivers have been installed. For example, if you are using a printer, you need a driver for that model printer. ● Remove all bootable media (CD or USB device) from the system before turning it on. ●...

  • Page 88: Solving General Problems

    Solving General Problems You may be able to easily resolve the general problems described in this section. If a problem persists and you are unable to resolve it yourself or if you feel uncomfortable about performing the operation, contact an authorized dealer or reseller. WARNING! When the computer is plugged into an AC power source, voltage is always applied to the system board.
  • Page 89 Table C-1 Solving General Problems (continued) There is no sound or sound volume is too low. Cause Solution System volume may be set low or muted. Check the F10 BIOS settings to make sure the internal system speaker is not muted (this setting does not affect the external speakers).
  • Page 90 Table C-1 Solving General Problems (continued) Poor performance is experienced. Cause Solution Too many applications running. Close unnecessary applications to free up memory. Add more memory. Some applications run in the background and can be closed by right-clicking on their corresponding icons in the task tray.

  • Page 91: Solving Power Problems

    Solving Power Problems Common causes and solutions for power problems are listed in the following table. Table C-2 Solving Power Problems Power supply shuts down intermittently. Cause Solution Voltage selector switch on rear of computer chassis (some Select the proper AC voltage using the selector switch. models) not switched to correct line voltage (115V or 230V).

  • Page 92: Solving Hard Drive Problems

    Solving Hard Drive Problems Table C-3 Solving Hard Drive Problems Hard drive error occurs. Cause Solution Hard disk has bad sectors or has failed. In Microsoft Windows XP, right-click Start, click Explore, and select a drive. Select File > Properties > Tools.

  • Page 93: Solving Media Card Reader Problems

    Table C-3 Solving Hard Drive Problems (continued) Computer will not boot from hard drive. Cause Solution Boot order is not correct. Run the Computer Setup utility and change boot sequence in Boot > Boot Device Priority. Hard drive is damaged. See the Worldwide Limited Warranty for terms and conditions.
  • Page 94 Table C-4 Solving Media Card Reader Problems (continued) Can not write to the media card. Cause Solution The media card is a read-only memory (ROM) card. Check the manufacturer’s documentation included with your card to see if it writable. Refer to the previous section for a list of compatible cards.

  • Page 95: Solving Display Problems

    Solving Display Problems If you encounter display problems, see the documentation that came with the monitor and the common causes and solutions listed in the following table. Table C-5 Solving Display Problems Blank screen (no video). Cause Solution Monitor is not turned on and the monitor light is not on. Turn on the monitor and check that the monitor light is on.
  • Page 96 Table C-5 Solving Display Problems (continued) Blank screen and the computer emits one short beep then one long beep followed by a three second pause. Cause Solution Pre-video memory error. Reseat DIMMs. Power on the system. Replace DIMMs one at a time to isolate the faulty module.
  • Page 97 Table C-5 Solving Display Problems (continued) The picture is broken up, rolls, jitters, or flashes. Cause Solution The monitor connections may be incomplete or the monitor Be sure the monitor cable is securely connected to the may be incorrectly adjusted. computer.
  • Page 98 Table C-5 Solving Display Problems (continued) Clicking noise coming from inside a CRT monitor. Cause Solution Electronic relays have been activated inside the monitor. None. It is normal for some monitors to make a clicking noise when turned on and off, when going in and out of standby mode, and when changing resolutions.

  • Page 99: Solving Audio Problems

    Solving Audio Problems If the computer has audio features and you encounter audio problems, see the common causes and solutions listed in the following table. Table C-6 Solving Audio Problems Sound cuts in and out. Cause Solution Processor resources are being used by other open Shut down all open processor-intensive applications.

  • Page 100: Solving Printer Problems

    Table C-6 Solving Audio Problems (continued) Sound does not come out of the speaker or headphones. Cause Solution Computer is in standby mode. Press the power button to resume from standby mode. CAUTION: When attempting to resume from standby mode, do not hold down the power button for more than four seconds.
  • Page 101 Table C-7 Solving Printer Problems (continued) Printer will not turn on. Cause Solution The cables may not be connected properly. Reconnect all cables and check the power cord and electrical outlet. Printer prints garbled information. Cause Solution The correct printer driver for the application is not installed. Install the correct printer driver for the application.

  • Page 102: Solving Keyboard And Mouse Problems

    Solving Keyboard and Mouse Problems If you encounter keyboard or mouse problems, see the documentation that came with the equipment and the common causes and solutions listed in the following table. Table C-8 Solving Keyboard Problems Keyboard commands and typing are not recognized by the computer. Cause Solution Keyboard connector is not properly connected.
  • Page 103 Table C-9 Solving Mouse Problems (continued) Mouse does not respond to movement or is too slow. Cause Solution Mouse may need cleaning. Remove the roller ball cover on the mouse and clean the internal components. Mouse may need repair. See the Worldwide Limited Warranty for terms and conditions.

  • Page 104: Solving Hardware Installation Problems

    Solving Hardware Installation Problems You may need to reconfigure the computer when you add or remove hardware, such as an additional drive or expansion card. If you install a plug and play device, Windows automatically recognizes the device and configures the computer. If you install a non–plug and play device, you must reconfigure the computer after completing installation of the new hardware.
  • Page 105 Table C-10 Solving Hardware Installation Problems (continued) The computer emits one short beep then one long beep followed by a three second pause. Cause Solution Memory is installed incorrectly or is bad. CAUTION: To avoid damage to the DIMMs or the system board, you must unplug the computer power cord before attempting to reseat, install, or remove a DIMM.

  • Page 106: Solving Network Problems

    Solving Network Problems Some common causes and solutions for network problems are listed in the following table. These guidelines do not discuss the process of debugging the network cabling. Table C-11 Solving Network Problems Wake-on-LAN feature is not functioning. Cause Solution Wake-on-LAN is not enabled.
  • Page 107 Table C-11 Solving Network Problems (continued) Network status link light never flashes. NOTE: The network status light is supposed to flash when there is network activity. Cause Solution No active network is detected. Check cabling and network equipment for proper connection. Network controller is not set up properly.
  • Page 108 Table C-11 Solving Network Problems (continued) Network controller stops working without apparent cause. Cause Solution The cable is not securely connected. Ensure that the cable is securely attached to the network connector and that the other end of the cable is securely attached to the correct device.

  • Page 109: Solving Memory Problems

    Solving Memory Problems If you encounter memory problems, some common causes and solutions are listed in the following table. CAUTION: Power may still be supplied to the DIMMs when the computer is turned off. To avoid damage to the DIMMs or the system board, you must unplug the computer power cord before attempting to reseat, install, or remove a DIMM.

  • Page 110: Solving Cd-Rom And Dvd Problems

    Table C-12 Solving Memory Problems (continued) The computer emits one short beep then one long beep followed by a three second pause. Cause Solution Memory is installed incorrectly or is bad. Reseat DIMMs. Power on the system. Replace DIMMs one at a time to isolate the faulty module.
  • Page 111 Table C-13 Solving CD-ROM and DVD Problems (continued) Movie will not play in the DVD drive. Cause Solution Movie may be regionalized for a different country. See the documentation that came with the DVD drive. Decoder software is not installed. Install decoder software.

  • Page 112: Solving Usb Flash Drive Problems

    Solving USB Flash Drive Problems If you encounter USB flash drive problems, common causes and solutions are listed in the following table. Table C-14 Solving USB Flash Drive Problems USB flash drive is not seen as a drive letter in Windows. Cause Solution The drive letter after the last physical drive is not available.

  • Page 113: Solving Front Panel Component Problems

    Solving Front Panel Component Problems If you encounter problems with devices connected to the front panel, refer to the common causes and solutions listed in the following table. Table C-15 Solving Front Panel Component Problems A USB device, 1394 device, headphone, or microphone is not recognized by the computer. Cause Solution Device is not properly connected.

  • Page 114: Solving Internet Access Problems

    Solving Internet Access Problems If you encounter Internet access problems, consult your Internet Service Provider (ISP) or refer to the common causes and solutions listed in the following table. Table C-16 Solving Internet Access Problems Unable to connect to the Internet. Cause Solution Internet Service Provider (ISP) account is not set up...
  • Page 115 Table C-16 Solving Internet Access Problems (continued) Internet takes too long to download Web sites. Cause Solution Modem is not set up properly. Verify that the modem is connected and communicating properly. Windows XP Select Start > Control Panel. Double-click System. Click the Hardware tab.

  • Page 116: Solving Software Problems

    Solving Software Problems Most software problems occur as a result of the following: ● The application was not installed or configured correctly. ● There is insufficient memory available to run the application. ● There is a conflict between applications. ● Be sure that all the needed device drivers have been installed.

  • Page 117: Interpreting Power Led And Beep Codes

    Interpreting Power LED and Beep Codes This section covers the audible codes that may occur before or during POST that do not necessarily have an error code or text message associated with them. WARNING! When the computer is plugged into an AC power source, voltage is always applied to the system board.

  • Page 118: Resetting The Password Jumper

    Resetting the Password Jumper To disable the power-on or setup password features, or to clear the power-on or setup passwords, complete the following steps: Shut down the operating system properly, then turn off the computer and any external devices, and disconnect the power cord from the power outlet. With the power cord disconnected, press the power button again to drain the system of any residual power.

  • Page 119: Resetting The Cmos Jumper

    Resetting the CMOS Jumper Turn off the computer and any external devices, and disconnect the power cord from the power outlet. The power must be disconnected from the system to clear CMOS. Disconnect the keyboard, monitor, and any other external equipment connected to the computer. WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system...

  • Page 120: Contacting Customer Support

    Contacting Customer Support For help and service, contact an authorized reseller or dealer. To locate a reseller or dealer near you, visit http://www.hp.com. NOTE: If you take the computer to an authorized reseller, dealer, or service provider for service, remember to provide the setup and power-on passwords if they are set. Refer to the number listed in the warranty or in the Support Telephone Numbers guide for technical assistance.

  • Page 121: Appendix D Specifications

    Specifications Table D-1 Specifications Desktop Dimensions 15.14 in 38.46 cm Height 7.27 in 18.46 cm Width 16.36 in 41.55 cm Depth Approximate Weight 16.66 lb 7.56 kg Temperature Range 50° to 95°F 10° to 35°C Operating -22° to 140°F -30° to 60°C Nonoperating Relative Humidity (noncondensing) 10-90%...
  • Page 122 Table D-1 Specifications (continued) Typical (idle) For 115V/60Mhz For 230V/50Hz 250W PFC+ HV: 250W PFC+ HV ATX: 53.1W or 181.177 BTU/hr or 49.8 W or 169.918 BTU/hr or 45.657Kg-cal/hr 42.819Kg-cal/hr 300W PFC+ HV: 300W PFC+ HV: 55.1W or 188.001 BTU/hr or 54.5W or 185.954 BTU/hr or 47.376Kg-cal/hr 46.86Kg-cal/hr...

  • Page 123: Index

    Index Symbols/Numerics connections 24-pin power pin assignments 72 system board 38 general problems 80 4-pin power pin assignments 70 connector pin assignments 69 grounding methods 18 country power cord set requirements 76 access panel hard drive Customer Support 77, 112 removal and replacement 26 installing 49 access panel, locked 81...
  • Page 124 PCI Express pin assignments 73 hard drive 46 line-in audio pin assignments 70 POST error codes 77 media card reader 44 line-in connector 5 power cord set requirements optical drive 42 line-out audio pin country specific 76 PCI card 35 assignments 70 power problems 83 PCI Express card 35...
  • Page 125 tools, servicing 22 Torx T15 screwdriver 22 USB pin assignments 69 USB ports front panel 3 rear panel 5 ventilation, proper 20 voltage switch 5 Wake-on-LAN feature 98 Index 117...

This manual is also suitable for:

Pro 2080 - microtower pc

Table of Contents