HP Armada 3500 Appendix

Power cord set requirements

Hide thumbs Also See for Armada 3500:

See also: Reference Manual , Appendix

appendix

OWER

ORD

B.1 3-Conductor Power Cord Set

The wide range input feature of your computer permits it to operate from any line

voltage from 100 to 240 volts AC.

The power cord set received with the computer meets the requirements for use in the

country where you purchased the equipment.

Power cord sets for use in other countries must meet the requirements of the country

where you use the computer.

B.1.1 General Requirements

The requirements listed below are applicable to all countries:

1. The length of the power cord for the system unit must be at least 5.00 feet (1.5 m)

and a maximum of 6.56 feet (2.0 m). The length of the power cord for the M35EU

must be 10 feet (3.05 m)

2. All power cord sets must be approved by an acceptable accredited agency

responsible for evaluation in the country where the power cord set will be used.

3. The power cord set must have a minimum current capacity of 10A and a nominal

voltage rating of 125 or 250 volts AC, as required by each country's power system.

4. The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC

320 Standard Sheet C5 connector, for mating with appliance inlet on the product.

EQUIREMENTS

Power Cord Set Requirements B-1

Table of Contents

Page 1 appendix OWER EQUIREMENTS B.1 3-Conductor Power Cord Set The wide range input feature of your computer permits it to operate from any line voltage from 100 to 240 volts AC. The power cord set received with the computer meets the requirements for use in the country where you purchased the equipment.
Page 2 B.1.2 Country-Specific Requirements 3-Conductor Power Cord Set Requirements — By Country Country Accredited Agency Applicable Note Numbers Australia EANSW Austria Belgium CEBC Canada Denmark DEMKO Finland FIMKO France Germany Italy Japan Norway NEMKO Sweden SEMKO Switzerland United Kingdom United States B.1.3 Notes: 1.