Page 1
KRF-V7771D (En/T) Setup Codes chart Tableau des codes de configuration Tabelle der Einstellungscode Setup Codes kaart Tabella dei codici di impostazione Gráfico de códigos de preparación Noting your compontnets Relevé des composants Auflisten der Komponenten Noteren van uw componenten Annotazione dei propri componenti Observación de sus componentes Setup Code Input Jack...
Page 7
Für Kenwood-Komponenten, die über Systemsteuerkabel verbunden sind : 7990 Voor Kenwood componenten die aangesloten zijn met systeem verbindingssnoeren : 7990 Per componenti Kenwood collegati via cavi di controllo di sistema : 7990 Para componentes Kenwood conectados con los cables de control del sistema :...
Page 8
Depending on the type of a multiple CD player, these code may not work. Refer to " Assigning the connected components to the selected inputs " of the instruction manual. Pour les composants Kenwood connectés par les cordons du système de commande ; Lecteur de CD standard : 8990 Lecteur de CD à...
Page 9
Für Kenwood-Komponenten, die über Systemsteuerkabel verbunden sind : 9990 Voor Kenwood componenten die aangesloten zijn met systeem verbindingssnoeren : 9990 Per componenti Kenwood collegati via cavi di controllo di sistema : 9990 Para componentes Kenwood conectados con los cables de control del sistema :...
Page 10
KRF-V7771D (En/T) Non-IR codes Codes Non-IR "Non-IR" - Codes "Non-IR" codes Codici "Non-IR" Códigos Non-IR About Non-IR codes If the required setup code is not found in the setup codes chart or the desired source component cannot be activated even when its setup code is input, try using the Non-IR code so that the component can be selected from the input selector of this unit.
Page 11
KRF-V7771D (En/T) Setup code to delete a setup code which is already registered on the remote control : 9999 If you disconnect a component and do not plan to replace it, you may want to delete the setup code from the remote control.
Page 12
KRF-V7771D (En/T) Note Note Note Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.) With some models, be sure to keep the ENTER key pressed for a while.