Canon LV-5220 - Multimedia Projector SVGA Functional Specification
Expand serial functional specification
Hide thumbs
Also See for LV-5220 - Multimedia Projector SVGA:
- Owner's manual (64 pages) ,
- Functional specification (20 pages) ,
- Specifications (6 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Chapters
Table of Contents
Related Manuals for Canon LV-5220 - Multimedia Projector SVGA
Summary of Contents for Canon LV-5220 - Multimedia Projector SVGA
- Page 1 LV-7225/7220/5220 EXPAND SERIAL FUNCTIONAL SPECIFICATION History of Modification Rev. Contents Date Note New Document 2004.08.31...
-
Page 2: Table Of Contents
Expand Serial Command Functional Specification Page 1 of 41 - CONTENT - 1. Overview ..........................5 2. Serial Interface Specifications.................... 5 2.1. Communication Specification ..................5 2.2. Connection ........................5 4. Notes for Notational ......................6 5. Functional Execution Command Table ................7 5.1. - Page 3 Expand Serial Command Functional Specification Page 2 of 41 8.4.12. CF_IMAGEADJ Command .................. 14 8.5. PC Control Command ....................15 8.5.1. CF_FSYNC Command ................... 15 8.5.2. CF_TDOTS Command.................... 15 8.5.3. CF_CLAMP Command ................... 15 8.5.4. CF_H-POS Command..................... 15 8.5.5. CF_V-POS Command ..................... 16 8.5.6.
- Page 4 Expand Serial Command Functional Specification Page 3 of 41 8.11.7. CF_LANG Command.................... 24 8.11.8. CF_ON-STA Command..................24 8.11.9. CF_P-MANE Command ..................25 8.11.10. CF_P-MANETIME Command................25 8.11.11. CF_FANSPEED Command................. 25 8.11.12. CF_KEYDIS Command ..................25 8.11.13. CF_TERMINAL Command ................25 8.11.14.
- Page 5 Expand Serial Command Functional Specification Page 4 of 41 9.6. Video Status Read Command ..................33 9.6.1. CR_SERSYS Command..................33 9.7. Input Status Read Command ..................33 9.7.1. CR_INPUT Command .................... 33 9.7.2. CR_SOURCE Command ..................33 9.7.3. CR_INPUT_%1 Command ..................34 9.7.4.
-
Page 6: Overview
Expand Serial Command Functional Specification Page 5 of 41 1. Overview 1.1. This Functional Specification defines communication functions such as Multi Card Imager for LV-7225/7220/5220. 1.2. The Projector Firmware Ver.1.x ready. 1.3. Commands are to communicate to such as Multi Card Imager, but most commands control a remote Projector with PC installed RS232C. -
Page 7: Notes For Notational
Expand Serial Command Functional Specification Page 6 of 41 3. Notes for Communication 3.1. The expand command is defined one command / one line that starts ”C” and ends carriage return (0x0D). 3.2. There are two types of command, functional execution commands and state read commands. Example of Functional Execution Command “CF_BRIGHT_032”... -
Page 8: Functional Execution Command Table
Expand Serial Command Functional Specification Page 7 of 41 5. Functional Execution Command Table 5.1. Image Command Table Execute command Item CF_BRIGHT_%1 [CR] Set Brightness value CF_CONT_%1 [CR] Set Contrast value CF_COLOR_%1 [CR] Set Color value CF_TINT_%1 [CR] Set Tint value CF_SHARP_%1 [CR] Set Sharpness value CF_GAMMA_%1 [CR]... -
Page 9: Lamp Command Table
Expand Serial Command Functional Specification Page 8 of 41 5.6. Lamp Command Table Execute command Item CF_LAMPH_%1 [CR] Reset Lamp total running time CF_LAMPMODE_%1 [CR] Select Lamp mode 5.7. Sound Command Table Execute command Item CF_VOLUME_%1 [CR] Set Volume value CF_MUTE_%1 [CR] Control Sound Mute On / Off 5.8. -
Page 10: Status Read Command Table
Expand Serial Command Functional Specification Page 9 of 41 6. Status Read Command Table 6.1. Image Status Read Command Table Status read command Item CR_BRIGHT [CR] Read Brightness setting value CR_CONT [CR] Read Contrast setting value CR_COLOR [CR] Read Color setting value CR_TINT [CR] Read Tint setting value CR_SHARP [CR]... -
Page 11: Setting Status Read Command Table
Expand Serial Command Functional Specification Page 10 of 41 6.8. Setting Status Read Command Table Status read command Item CR_BBACK [CR] Read Blue Back setting CR_DISP [CR] Read Display setting CR_LOGO [CR] Read Logo setting CR_RCODE [CR] Read selected Remote Code CR_LANG [CR] Read selected Language CR_ON-STA [CR]... -
Page 12: Functional Execution Command
Expand Serial Command Functional Specification Page 11 of 41 8. Functional Execution Command 8.1. Format The following format’s commands issued form a PC. Pattern 1: “CF_COMMAND” [CR] Pattern 2: “CF_COMMAND_” %1 [CR] CF_: Header COMMAND: Letters %1: Parameter (Letters) _: Space (To separate COMMAND and Parameter) When a projector decoded a received data and ready to receive the next Command, it will return acknowledgment. -
Page 13: Image Command
Expand Serial Command Functional Specification Page 12 of 41 8.4. Image Command 8.4.1. CF_BRIGHT Command Command “CF”_BRIGHT_%1” [CR] “000 – 063” ----------- Directly select the Bright setting value “UP” -------------------- Bright setting value +1 “DN” -------------------- Bright setting value -1 Set the user control Bright value. -
Page 14: Cf_Sharp Command
Expand Serial Command Functional Specification Page 13 of 41 8.4.5. CF_SHARP Command Command “CF_SHARP_%1” [CR] “000 – 015” ------------ Directly select the Sharpness setting value “UP” --------------------- Sharpness setting value +1 “DN” --------------------- Sharpness setting value -1 Set the user control Sharpness value. The value set by the command will not be saved to the Projector. -
Page 15: Cf_Progv Command
Expand Serial Command Functional Specification Page 14 of 41 8.4.9 CF_PROGV Command Command “CF_PROGV_%1” [CR] “L1” ------------- Select Progressive Mode L1 “L2” ------------- Select Progressive Mode L2 “OFF” ---------- Cancel Progressive Set / Cancel for Progressive. The value set by the command will not be saved to the Projector. Details Therefore, when AC Power Off the Projector, the value will return to the original setting. -
Page 16: Pc Control Command
Expand Serial Command Functional Specification Page 15 of 41 8.5. PC Control Command 8.5.1. CF_FSYNC Command Command “CF_FSYNC_%1” [CR] “0000 – 0031” --------- Directly set Fine Sync setting value “UP” --------------------- Fine Sync setting value +1 “DN” --------------------- Fine Sync setting value -1 Set Fine Sync for PC signal. -
Page 17: Cf_V-Pos Command
Expand Serial Command Functional Specification Page 16 of 41 8.5.5. CF_V-POS Command Command “CF_V-POS_%1” [CR] “0000 – nnnn” ----------- Directly set Vertical Position setting value “nnnn” is maximum value. This is current Total Line value - Display Line value. “UP” ---------------------- Vertical Position setting value +1 “DN”... -
Page 18: Cf_Pcstore Command
Expand Serial Command Functional Specification Page 17 of 41 8.5.8. CF_PCSTORE Command Command “CF_PCSTORE”_%1” [CR] “MODE1” ------------ Store current PC Adjust status to Mode 1 “MODE2” ------------ Store current PC Adjust status to Mode 2 “MODE3” ------------ Store current PC Adjust status to Mode 3 “MODE4”... -
Page 19: Cf_Avhpos Command
Expand Serial Command Functional Specification Page 18 of 41 8.6.3. CF_AVHPOS Command Command “CF_AVHPOS_%1” [CR] “UP” ------------ Current setting value +1 “DN” ------------ Current setting value –1 Set AV Service Mode Horizontal Position value. (Only valid when it is in the usual Power On status) Details This setting status is stored in EEPROM, hold even if AC Power turning Off and On. -
Page 20: Cf_Source Command
Expand Serial Command Functional Specification Page 19 of 41 8.7.2. CF_SOURCE Command Command “CF_SOURCE_%1” [CR] “DIGITAL” --------- Select Digital Input Computer 1 “ANALOG” - ------- Select Analog Input “HDCP” ------------- Select DVI HDCP Input “ANALOG” --------- Select RGB Input Computer 2 “YPBPR”... -
Page 21: Cf_System Command
Expand Serial Command Functional Specification Page 20 of 41 8.7.4. CF_SYSTEM Command Command “CF_SYSTEM_%1” [CR] “MODE1” ------------- Select Mode 1 “MODE2” ------------- Select Mode 2 PC Input “MODE3” ------------- Select Mode 3 “MODE4” ------------- Select Mode 4 “MODE5” ------------- Select Mode 5 “AUTO”... -
Page 22: Cf_Flscren Command
Expand Serial Command Functional Specification Page 21 of 41 8.8.2. CF_FLSCREN Command Command “CF_FLSCREN_%1” [CR] “ON” ------------- Select Full Screen “OFF” ------------ Cancel Full Screen Set / Cancel Full Screen. (Only valid when it is in the usual Power On status) PC Input The value set by this Command will not be saved to the Projector. -
Page 23: Cf_Kystnmode Command
Expand Serial Command Functional Specification Page 22 of 41 8.8.6. CF_KYSTNMODE Command Command “CF_KYSTNMODE_%1” [CR] “STR” ----------- Set Keystone store Mode to Store “RST” ----------- Set Keystone store Mode to Reset Details Set Keystone store Mode. (Only valid when it is in the usual Power On status) Acceptable “000”... -
Page 24: Cf_Mute Command
Expand Serial Command Functional Specification Page 23 of 41 8.10.2. CF_MUTE Command Command “CF_MUTE_%1” [CR] “ON” --------- Sound Mute On “OFF” -- ----- Sound Mute Off Details Control Sound Mute On/Off. (Only valid when it is in the usual Power On status) Acceptable “000”... -
Page 25: Cf_Rear Command
Expand Serial Command Functional Specification Page 24 of 41 8.11.5. CF_REAR Command Command “CF_REAR_%1” [CR] “ON” ---------- Select Rear “OFF” --------- Cancel Rear Set / Cancel Rear. (Only valid when it is in the usual Power On status) Details When Rear is On, it will be a mirror-reversed image. This setting status is stored in EEPROM, hold even if AC Power turning Off and On. -
Page 26: Cf_P-Mane Command
Expand Serial Command Functional Specification Page 25 of 41 8.11.9. CF_P-MANE Command Command “CF_P-MANE_%1” [CR] “ O F F ” - - - - - - - - - - - - - - - Set Power Management to Off “... -
Page 27: Cf_Standbymode Command
Expand Serial Command Functional Specification Page 26 of 41 8.11.14. CF_STANDBYMODE Command Command “CF_STANDBYMODE_%1” [CR] “ECO” ------------ Standby power requirement is smaller “NORMAL” ----- Normal Standby power requirement Details Set Standby mode. (Only valid when it is in the usual Power On status) Acceptable “000”... -
Page 28: Cf_Logocapture Command
Expand Serial Command Functional Specification Page 27 of 41 8.11.18. CF_LOGOCAPTURE Command Command “CF_LOGOCAPTURE_%1” [CR] “START” ------------ Capture On Capture the current image on screen. When beginning to capture the image, any command is not available until the Details capture has done. When sending the command during the process, the Projector returns the error code, “301”. -
Page 29: Status Read Command
Expand Serial Command Functional Specification Page 28 of 41 9. Status Read Command 9.1. Format PC issues Commands as below “CR_COMMAND” [CR] COMMAND: Character Line When Projector receives the appropriate Command, it returns a character line as the required data. “000_%1”... -
Page 30: Cr_Tint Command
Expand Serial Command Functional Specification Page 29 of 41 9.4.4. CR_TINT Command Command “CR_TINT” [CR] Details Get Tint value of user control Acceptable “000_%a” [CR] “000” – “063” Response “Error code” [CR] --- Invalid Unacceptable “?” [CR] ---------------- When receives unclear command 9.4.5. -
Page 31: Cr_Coltemp Command
Expand Serial Command Functional Specification Page 30 of 41 9.4.10. CR_COLTEMP Command Command “CR_COLTEMP” [CR] Details Get Color Temp setting status Acceptable “000_%a” [CR] “000” ---------- XLow “001” ---------- Low Response “002” ---------- Mid “003” ---------- High “ADJ” --------- Processing White Balance adjustment Unacceptable “?”... -
Page 32: Pc Status Read Command
Expand Serial Command Functional Specification Page 31 of 41 9.5. PC Status Read Command 9.5.1. CR_FSYNC Command Command “CR_FSYNC” [CR] Details Get Fine Sync value Acceptable “000_%a” [CR] “0000” – “0031” Response “Error code” [CR] ---- Invalid Unacceptable “?” [CR] ---------- When the Projector received unclear command 9.5.2. -
Page 33: Cr_Ddots Command
Expand Serial Command Functional Specification Page 32 of 41 9.5.6. CR_DDOTS Command Command “CR_DDOTS” [CR] Details Get Display Dots value Acceptable “000_%a” [CR] “0100” – “nnnn” Response (nnnn = Total Dots – Horizontal Position) “Error code” [CR] ---- Invalid Unacceptable “?”... -
Page 34: Video Status Read Command
Expand Serial Command Functional Specification Page 33 of 41 9.6. Video Status Read Command 9.6.1. CR_SERSYS Command Command “CR_SERSYS” [CR] Get selected signal. Details When Auto Mode, it returns by Auto-detect. Only available when Input-Video. (Unavailable when Input is Computer) Acceptable “000_%a”... -
Page 35: Cr_Input_%1 Command
Expand Serial Command Functional Specification Page 34 of 41 9.7.3. CR_INPUT_%1 Command Command “CR_INPUT_%1” [CR] “COMPUTER1” -------- Specify Computer1 Input “COMPUTER2” -------- Specify Computer2 Input “VIDEO” ------------------ Specify Video Input Details Get specified Input Source. Acceptable “000_%a” [CR] When %1 is COMPUTER1 “ANALOG”... -
Page 36: Screen Status Read Command
Expand Serial Command Functional Specification Page 35 of 41 9.8. Screen Status Read Command 9.8.1. CR_SCREEN Command Command “CR_SCREEN” [CR] Details Get selected Screen Size Acceptable “000_%a” [CR] “NORMAL” -------- Normal (4:3) is selected “WIDE” -------------- Wide (16:9) is selected Response “NORMAL”... -
Page 37: Lamp Status Read Command
Expand Serial Command Functional Specification Page 36 of 41 9.9. Lamp Status Read Command 9.9.1. CR_LAMPREPL Command Command “ＣR＿ＬＡＭＰＲＥＰＬ”[CR] Details Get Lamp replacement time information Acceptable “000_%a” [CR] “1Y” ------- Over the Lamp replacement time Response “1N” ------- Have not reached the lamp replacement time Unacceptable “?”... -
Page 38: Setting Status Read Command
Expand Serial Command Functional Specification Page 37 of 41 9.11. Setting Status Read Command 9.11.1. CR_BBACK Command Command “CR_BBACK” [CR] Details Get Blue Back setting Acceptable “000_%a” [CR] “ON” --------- Set Blue Back Response “OFF” ------- Cancel Blue Back Unacceptable “?”... -
Page 39: Cr_Lang Command
Expand Serial Command Functional Specification Page 38 of 41 9.11.5. CR_LANG Command Command “CR_LANG” [CR] Details Get selected Language Acceptable “000_%a” [CR] “ENG” --------- English is selected “DEU” --------- German is selected “FRA” --------- French is selected “ITA” ---------- Italian is selected “ESP”... -
Page 40: Cr_Terminal Command
Expand Serial Command Functional Specification Page 39 of 41 9.11.10. CR_KEYDIS Command Command “CR_KEYDIS” [CR] Details Get RC / KEY status Acceptable “000_%a” [CR] “NONE” -------- Both RC & KEY are available Response “RC” ------------- RC is key locked “KEY” ----------- KEY is key locked Unacceptable “?”... -
Page 41: Cr_Autosetup Command
Expand Serial Command Functional Specification Page 40 of 41 9.11.14. CR_AUTOSETUP Command Command “CR_AUTOSETUP_%1” [CR] “KEYSTONE” --------- Specify Auto Keystone “PCADJ” ---------------- Specify Auto PC Adj. Details Get Auto Setup setting status Acceptable “000_%a” [CR] When Keystone “AUTO” ----------- Auto setting “MANUAL”... -
Page 42: Cr_Ptimer Command
Expand Serial Command Functional Specification Page 41 of 41 9.12.4. CR_PTIMER Command Command “CR_PTIMER” [CR] Details Get Presentation Timer status. Acceptable “000_%a” [CR] “ON” ---------- Presentation timer is active Response “STOP” ------- Presentation timer is pause “OFF” --------- Presentation timer is inactive Unacceptable “?”...