Delete A Block; Failure Conditions, Fail-Safe, And Fail-Through - HP P4518A - Traffic Management Server Sa7150 User Manual
Hp e-commerce/xml server accelerator sa7150 - user guide
Hide thumbs
Also See for P4518A - Traffic Management Server Sa7150:
- Release notes (4 pages) ,
- Warranty and support information (12 pages)
Table of Contents
Advertisement
C H A P T E R 3
Failure Conditions, Fail-safe, and Fail-through
Failure Conditions, Fail-safe, and Fail-through
Delete a Block
The example below illustrates how to delete a subnet block. Type the
delete block command with the block ID (block ID is 1 in the
example).
1. Use the show block command to identify the block to be deleted.
HP SA7150> show block
-----------
blocks :
-----------
(1) block 10.1.2.1 255.255.255.255 20.1.2.1
255.255.255.255 80 0xffff
-----------
2. Use the delete block command followed by the block ID to
delete the block.
HP SA7150> delete block 1
During a failure condition unprocessed data can either pass through
the SA7150 or not, depending on whether Fail-safe or Fail-through
mode is enabled. The Fail-through switch is by default in Fail-safe
mode, meaning that during a failure no data packets will pass from
one side of the SA7150 to the other. For details, see "Failure/Bypass
Modes" in Appendix B.
51
Advertisement
Table of Contents
