Advertisement
Quick Links
Home Cinema 2300
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Contents
Make sure your projector box includes all of these parts:
Connect the projector
Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI
cable (not included) to one of the HDMI ports on the projector and the other
end to an HDMI port on your video device or computer. See the online User's
Guide for details.
Caution: Do not turn on the video source before connecting it to the projector;
you may damage the projector.
Note:
• Some external video sources may require an optional HDMI adapter cable.
• For more information on connecting the projector to your computer or other
devices, see the online User's Guide.
Audio Out port
The projector has a built-in speaker. You can also connect the projector to
external self-powered speakers through the Audio Out port. See the online
User's Guide for more information.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
HDMI cable
Audio cable
power light on the projector turns blue.
3
Install the batteries into the remote control.
4
Remove the lens cover.
5
Press the
power button on the projector or remote control. The
projector beeps, the
Note: To shut down the projector, press the
projector or remote control.
6
The default language of the projector menu system is English. To select
another language, press the
TM
control. Select Extended and press Enter. Select Language and press
Enter. Select your language and press Enter. Press the
exit the menu system.
For more information on using the remote control, see the online User's Guide.
Adjust the image
1
To raise the image, press the foot release button while you lift the front of
the projector. Release the button to lock the foot in position.
2
To adjust a tilted image when the projector is set on a flat surface, adjust
the rear feet so both sides are level.
3
To reduce or enlarge the image, use the zoom slider.
4
To sharpen the image, use the focus slider.
5
If your image looks like
to one side of the screen at an angle. Place the projector directly in front of
the center of the screen, facing the screen squarely. If you can't move the
projector, use the horizontal keystone slider on the projector to correct the
image shape.
status light flashes blue, then stays on.
power button twice on the
menu button on the projector or remote
or
, you may have placed the projector off
menu button to
Advertisement
Related Manuals for Epson 2300
Summary of Contents for Epson 2300
- Page 1 Home Cinema 2300 Quick Setup Install the batteries into the remote control. IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide. Contents Remove the lens cover. Make sure your projector box includes all of these parts: Press the power button on the projector or remote control.
- Page 2 “Epson Limited Warranty Coverage.” • If you see a blank screen when a computer is connected, check the Coverage begins as of the date of delivery to the purchaser by Epson or by an authorized Epson dealer, in the country of purchase. following: Epson also guarantees that the consumables (batteries, filters, and lenses) included with •...
- Page 3 If your country does not appear on the list, contact your nearest Epson sales office. Toll or equipment, will be billed to the purchaser at the rates in effect at the Epson Authorized long distance charges may apply.
- Page 4 EPSON is a registered trademark and the EPSON logo is a registered logomark of Seiko Epson Corporation. Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries The term HDMI is a trademark or registered trademark of HDMI Licensing Administrator, Inc.