Page 1
DCP-7055 / DCP-7057 DCP-7060D / DCP-7065DN Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.
Page 2
• Please save the original packaging should you need to ship the machine in future. • If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier. For how to repack the machine, see Packing and shipping the machine in the Advanced User's Guide.
Page 3
Open the front cover. Pull the paper strip to remove the protective material as shown in the illustration. Remove the Silica Pack from the inside of the machine. Take out the drum unit and toner cartridge assembly. CAUTION CAUTION DO NOT eat the Silica Pack.
Put the drum unit and toner cartridge assembly back in the machine. While pressing the green paper-guide release lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots.
Fan the stack of paper well to avoid paper jams Connect the power cord and misfeeds. IMPORTANT DO NOT connect the interface cable yet. Put paper in the tray and make sure: Connect the AC power cord to the machine, The paper is below the maximum paper ...
—OR— If the LCD shows the correct language, press a. Press b to decrease the contrast. —OR— Press OK. Press b to go back to step b to choose the Press Stop/Exit. language again. English? a Yes b No Note...
, go to page 8 Macintosh, go to page 10 For Wired Network ® Windows , go to page 12 Macintosh, go to page 14 Note You can download the latest drivers and utilities for your machine from the Brother Solutions Center at http://solutions.brother.com/.
2000 Professional/XP/XP Professional x64 Edition/Windows Vista /Windows Before you install Install MFL-Pro Suite Make sure that your computer is ON and you Put the installation CD-ROM into your are logged on with Administrator rights. CD-ROM drive. If the model name screen appears, choose your machine.
Page 9
Turn the machine on, and follow the on-screen instructions to complete setup. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. Note ®...
Page 10
Install MFL-Pro Suite Make sure your machine is connected to the Put the installation CD-ROM into your power and your Macintosh is ON. You must be CD-ROM drive. logged on with Administrator rights. Double-click the Start Here OSX icon. Follow IMPORTANT the on-screen instructions.
Page 11
Download and install Presto! PageManager When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click Presto! PageManager and follow the on-screen instructions.
2000 Professional/XP/XP Professional x64 Edition/Windows Vista /Windows Connect the network interface cable to the LAN Before you install connector and then connect it to a free port on your hub. Make sure that your computer is ON and you are logged on with Administrator rights.
Page 13
5 users. This license supports the installation of the MFL-Pro Suite including ScanSoft™ PaperPort™ 12SE or ScanSoft™ PaperPort™ 11SE on up to 5 PCs on the network. If you want ® If you are not using the Windows Firewall, see to use more than 5 PCs with ScanSoft™...
Page 14
Choose your machine from the list, and then click OK. Connect the network interface cable to the LAN connector and then connect it to a free port on your hub. Note If your machine is not found over the network, confirm your network settings.
Page 15
OK. Go to d. Install MFL-Pro Suite on additional computers • If you want to use the machine’s SCAN key to (if needed) scan over the network, you must check the Register your computer with the "Scan To"...
HTTP (Hyper Text Transfer Protocol). Turn the machine on and wait until it is in the Ready state. Note • The default User Name is ‘admin’ and the Press Menu.
Brother CreativeCenter Get inspired. If you're using Windows, double-click the Brother CreativeCenter icon on your desktop to access our FREE web site with many ideas and resources for personal and professional use. Mac users can access Brother CreativeCenter at this web address: http://www.brother.com/creativecenter/...
Page 18
Consumables Consumables When the time comes to replace consumable items, an error will be indicated by the LCD on the control panel. For more information about the consumables for your machine, visit us at http://solutions.brother.com/ or contact your local Brother reseller.
Page 19
The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.