Related Manuals for Siemens SX87TX02CE
Summary of Contents for Siemens SX87TX02CE
- Page 1 SX87TX02CE Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 7 Programmes ...... 19 1.1 General information.... 4 7.1 Information for test institutes ... 20 1.2 Intended use...... 4 7.2 Favourite ...... 20 1.3 Restriction on user group.. 4 7.3 Intelligent ...... - Page 3 20 Transportation, storage and 13.2 Unsuitable detergents ... 31 disposal ........ 54 13.3 Information on detergents .. 32 20.1 Removing the appliance .. 54 13.4 Adding detergent.... 32 20.2 Protect appliance from frost.. 55 14 Tableware ........ 33 20.3 Transporting the appliance ... 55 14.1 Damage to glass and table- 20.4 Disposing of old appliance ...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- ▶...
-
Page 6: Safe Use
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap- ▶... - Page 7 Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning ▶ agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety WARNING ‒ Risk of burns! The blow opening of the Zeolith container becomes hot and can cause burns. Never touch the blow opening of the Zeolith container. ▶ 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. -
Page 9: Safety Systems
Safety en Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. ▶ Never let children play with or operate the appliance. ▶ WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. -
Page 10: Preventing Material Damage
en Preventing material damage Modified or damaged water hoses Preventing material damage 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing material damage 2.1 Safe installation Only use the water hoses supplied ▶... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish on ▶ Environmental protection and saving energy 4 Environmental protec- the appliance, do not use sponges with a rough surface or abrasive tion and saving energy cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Sensors
en Environmental protection and saving energy During the drying phase, moisture Sensor set- Description from the interior of the dishwasher is ting stored in the mineral and heat energy Sensitive Adjusts the pro- is released. The heat energy is blown gramme strength for out into the interior of the dishwasher effective removal of with dry air. -
Page 13: Installation And Connection
Installation and connection en installing it under a continuous work- Installation and connection 5 Installation and con- top that is securely connected to ad- jacent cabinets. nection Follow the safety instructions. To ensure proper operation, connect → Page 4 Installation and connection the appliance to the power and water Follow the instructions for electrical supply correctly. -
Page 14: Drinking Water Connection
en Installation and connection 5.4 Drinking water connec- tion Connect your appliance to a drinking water connection. Installing the drinking water connection Note If you are replacing the appliance, ¡ you must use a new water supply hose. Consult the installation instructions supplied for the steps required here. -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 56. - Page 16 en Familiarising yourself with your appliance Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 30 Bottom basket Bottom basket → Page 24 Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the table- ware in the bottom basket.
-
Page 17: Controls
Familiarising yourself with your appliance en 6.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 4 5 6 7 8 9 ON/OFF button and reset Switching on the appliance... -
Page 18: Programmes
en Familiarising yourself with your appliance Display Remote Start If you have activated the function and are controlling the appliance via the Home Connect app, the display lights up on the appliance. WLAN display Home Connect → Page 41 Timer programming Setting timer programming → Page 36 Remote Start → "Remote Start ", Page 42... - Page 19 Programmes en Programmes 7 Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
-
Page 20: Information For Test Institutes
en Programmes Programme Programme se- quence Tableware: Particularly gentle and Delicate tableware, cutlery, tem- improved drying: ¡ brilliantShine perature-sensitive plastics and Pre-Rinse ¡ glasses Cleaning 40 °C ¡ Level of soiling: Intermediate rinse ¡ Lightly adhering fresh food rem- ¡ Final rinse 50 °C ¡... -
Page 21: Intelligent
Programmes en The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware. The tableware undergoes intermedi- ate cleaning via cold rinsing. Tip: You can use the Home Connect app to download additional pro- grammes and save them to the button. - Page 22 en Additional functions Additional functions 8 Additional functions You can find an overview of the additional functions that can be selected here. Additional functions Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
-
Page 23: Features
Features en Press in the levers on the right and Features 9 Features left on the outside of the basket. You can find an overview of the pos- Features sible features of your appliance and how to use them here. These features depend on the model of your appliance. -
Page 24: Etagere
en Features 9.2 Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 9.4 Folding prongs Use the folding prongs to position tableware securely, e.g. plates. If you do not need the cutlery shelf, you can fold it up. -
Page 25: Cutlery Drawer
Features en Push the lever forwards and fold To fold down a side shelf, push the down the prongs . lever forwards and fold down the side shelf . To use the prongs again, fold them back up. To fold down the folding spines, push the lever forwards and fold The prongs audibly click into posi- down the folding spines... -
Page 26: Glasszone
en Before using for the first time 9.6 glassZone Before using for the first time 10 Before using for the Use the glassZone in the top basket first time to clean all types of glasses gently yet thoroughly. Before using for the first time 10.1 Performing initial start- On initial start-up or after a reset to the factory settings, you will need to... -
Page 27: Water Softening System
Water softening system en To remove any marks from water Water softening system 11 Water softening sys- or other residues, we recommend you operate the appliance without tableware before using it for the first time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank, and parts of the appliance may become blocked. -
Page 28: Special Salt
en Water softening system Press repeatedly until the display Note: Only use special salt for shows "Water hardness". dishwashers. Do not use salt tablets. Press repeatedly until the Do not use table salt. right water hardness has been set. Add the special salt to the dis- The value 16 - 20 is set at the fact- penser. -
Page 29: Regeneration Of The Water Softening System
Rinse aid system en The water hardness is 0 - 8 °E. ¡ Additional power consump- 0.05 You do not need to use special tion in kWh salt. The consumption values specified Press . are laboratory measurements determ- To open the basic settings, press ined in accordance with the currently for approx. -
Page 30: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. 12.3 Switching the rinse aid system off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. -
Page 31: Unsuitable Detergents
Detergent en Tip: Suitable detergents are available For better washing and drying results online via our website or from Cus- and to avoid damage to the appli- ance, please additionally use Special tomer Service → Page 55. salt → Page 28 and Rinse aid Tabs → Page 29. Tabs are suitable for all cleaning Combined detergent functions and do not need to be... -
Page 32: Information On Detergents
en Detergent Add the detergent to the dry deter- 13.3 Information on deter- gent dispenser. gents Follow the instructions on detergents 50 ml in everyday use. 25 ml Detergents marked as "organic" or ¡ 15 ml "ecological" (environmentally friendly) generally contain lower levels of active agents or com- pletely dispense with certain sub- stances. -
Page 33: Tableware
Tableware en Close the lid of the detergent dis- 14.1 Damage to glass and penser. tableware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommenda- tion The following... -
Page 34: Arrange Tableware
en Tableware allowing steam to escape and water Cause Recommenda- to leak out around the door. This tion could damage your kitchen units. Highly caustic al- If you are using kaline or highly highly caustic al- acidic cleaning kaline or highly solutions, in par- acidic cleaning ticular commer-... -
Page 35: Removing Tableware
Basic operation en To save resources, do not pre- 14.3 Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 36: Setting A Programme
en Basic operation The Eco 50° programme is set by Press repeatedly until the default. display shows the right time. The Eco 50° programme is espe- Depending on the setting of the cially environmentally friendly and time display, the end of the pro- ideal for normally soiled tableware. -
Page 37: Terminate Programme
Basic operation en will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. Open the appliance door carefully. Press . The programme is saved and the appliance switches off. Press to resume the pro- gramme. -
Page 38: Basic Settings
en Basic settings Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 16.1 Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time. - Page 39 Basic settings en Basic setting Selection Description Water connection Cold water Set cold water or hot water connec- Hot water tion. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g.
- Page 40 en Basic settings Basic setting Selection Description Door Opening Single push Electric door opening is activated ¡ Child-proof lock with the setting "Single push". You Double push open the appliance door by press- Push deactivated ing on the upper middle section of the appliance door once.
-
Page 41: Changing Basic Settings
Home Connect en Basic setting Selection Description Greeting Switch display of the brand name logo on or off when the appliance is switched on. Factory setting Reset Restore changed settings to the fact- ory settings. The settings for initial start-up must be configured. -
Page 42: Setting Up The Home Connect App
en Home Connect Activating Remote Start 17.1 Setting up the When you have selected "Manual" in Home Connect app the basic settings of this function, ac- Install the Home Connect app on tivate the function on your appliance. your mobile device. Requirements Start the Home Connect app and The appliance is connected to your ¡... -
Page 43: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. - Page 44 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limes- Liquid machine care Appliance interior, e.g. cale product or machine bottle hung in the cut- descaler in powder lery basket or powder form. in the interior. Food remnants and Machine cleaner Detergent dispenser deposits...
-
Page 45: Filter System
Cleaning and servicing en Pull down the micro filter to re- 18.5 Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may... -
Page 46: Cleaning Spray Arms
en Cleaning and servicing Insert the filter system into the ap- Pull up the lower spray arm to re- pliance and turn the coarse filter move. clockwise. Make sure that the arrow mark- ‒ ings match up. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign objects. - Page 47 Cleaning and servicing en Place the glassZone in the top basket and lock in position . Check that the mounts are in the correct position. The glassZone audibly clicks into position . Push in the top basket.
-
Page 48: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Risk of electric shock! Incorrect repairs are dangerous. - Page 49 Troubleshooting en Fault Cause and troubleshooting E:3200 or indicator Water tap is jammed or furred up. for water supply lights Turn on the water tap. ▶ The flow rate must be at least 10 l/min when the water supply is open. The filters in the water connection of the supply or AquaStop hose are blocked.
- Page 50 en Troubleshooting Fault Cause and troubleshooting E:6103 lights up. Wa- Not an appliance fault. Siphon connection is still ter is not drained. closed or the wastewater hose is kinked or blocked. Check the connection to the siphon and open if ne- cessary.
- Page 51 Troubleshooting en Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. ‒ Pull out the mains plug or switch off the fuse in ‒...
- Page 52 en Troubleshooting Fault Cause and troubleshooting Remnants of food on Clean the filters. ▶ tableware. → "Cleaning filters", Page 45 Filters are inserted incorrectly and/or not engaged. Insert the filters properly. → "Filter system", Page 45 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. ▶...
- Page 53 Troubleshooting en Fault Cause and troubleshooting Removable streaks Detergent residue is present in the final rinse. Lid of are present on the detergent dispenser is blocked by tableware items glasses, glassware and will not open fully. with a metallic appear- Arrange tableware in the top basket tableware so ance and cutlery.
-
Page 54: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press 19.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 55: Protect Appliance From Frost
Customer Service en 20.2 Protect appliance from 20.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 56: Product Number (E-Nr.), Production Number (Fd) And Consecutive Numbering (Z-Nr.)
en Customer Service Customer Service for a period of at 21.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area. -
Page 57: Technical Specifications
Technical specifications en Technical specifications 22 Technical specifications Technical specifications Weight Max.: 60 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) ¡ Inlet rate Min. 10 l/min Water temperature Cold water. -
Page 58: Statement Of Compliance For Great Britain
Conformity essential requirements and other rel- A detailed Declaration of Conformity evant provisions of Directive can be found online at siemens- 2014/53/EU. home.bsh-group.com/uk/ among the A detailed RED Declaration of Con- additional documents on the product formity can be found online at page for your appliance. - Page 59 Declaration of Conformity en The manufacturer, BSH Hausgeräte GmbH deems that it has complied with provision 5.1-1 of ETSI EN 303 ¡ 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; provision 5.2-1 of ETSI EN 303 ¡...
- Page 60 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...