Table of Contents
Advertisement
b.
Remove the hinges (3).
8.
Remove the touch control board:
a.
Disconnect the cable from the ZIF connector (1) on the end of the board.
b.
Disconnect the two cables from the ZIF connectors (2) on the board.
c.
Peel the board (3) off the panel. The board is attached with double-sided adhesive.
NOTE:
When replacing the touch control board or display panel, be sure to update the touch
firmware, available on the
9.
Remove the wireless antennas:
a.
Remove the antenna cables from the clips (1) on the sides of the display back cover.
HP product support
page.
Display assembly
49
Advertisement
Table of Contents
