Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instruction
protection
manual
1. SAFETY
Ensure all workshop safety rules, regulations, and conditions are complied with when using the torque wrench.
9
Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be
9
dangerous and will invalidate the warranty.
After use adjust to lowest torque setting (but not below), clean and store in a safe, dry, childproof location.
9
Keep children and unauthorised persons away from the working area.
9
The wrench is a precision tool, handle with care.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
If it is suspect that the wrench is damaged or faulty, have it checked by Sealey or one of our Service Agents.
9
DO NOT use wrench unless you have been instructed in its use by a qualified person.
8
DO NOT use any cleaner which might affect the high pressure grease with which the wrench is packed.
8
DO NOT use torque wrench as a lever bar.
8
DO NOT Use with damaged hand tools, sockets, extensions and accessories may result in injury.
8
If the Torque wrench is not kept in calibration this may cause damage to parts or tools.
8
DO NOT use extensions on handle as damage to torque wrench will result and will invalidate the Warranty.
8
DO NOT Over tighten of fasteners may result in breakage.
8
Handle is not insulated, DO NOT use on live electrical or high voltage circuits.
8
DO NOT drop or throw the wrench.
8
WARNING! DO NOT use the wrench if damaged or thought to be faulty. (Contact Service Agent).
‰
2. INTRODUCTION
Range 300-1000Nm(200-750lb.ft). Scales graduated in both lb.ft and Nm giving accurate results to ±4%. Calibration tolerance in
accordance with BS EN ISO 6789:2017. Every wrench is tested and supplied with an individually numbered test certificate.
Breakback design significantly reduces the risk of over torquing. Ratchet head features push-through drive to allow torquing either
clockwise or anti-clockwise. Comfortable soft grip handle. Supplied with additional tool to drive the external nut at base of grip
clockwise/anti-clockwise for easy torque adjustment/setting. Supplied in storage case.
3. SPECIFICATION
Model No: ....................................................STW501.V2
Drive ................................................................... 3/4"Sq
Length .............................................................. 1870mm
Range .................................. 300-1000Nm(200-750lb.ft)
4. ASSEMBLY
fig.1
Push in Pin locator (fig1.1) and push bar (Fig1.2) into ratchet head (fig1.3) making sure that the pin clicks into place. The assembled
bar will look as in (fig.2).
fig.2
© Jack Sealey Limited
3/4"SQ DRIVE BREAKBACK TORQUE WRENCH
300-1000NM
STW501.V2
MODEL NO:
Nett Weight: ............................................................................. 7.40kg
Original Language Version
STW501.V2 Issue:1 10/05/24
Advertisement
Related Manuals for Sealey STW501.V2
Summary of Contents for Sealey STW501.V2
- Page 1 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. If it is suspect that the wrench is damaged or faulty, have it checked by Sealey or one of our Service Agents. DO NOT use wrench unless you have been instructed in its use by a qualified person.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Warranty: Lifetime guarantee. Proof of purchase required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk STW501.V2 Issue:1 09/05/24...