7.
If it is necessary to replace the display panel cable:
a.
Release the display panel cable (1) from the routing clips (2) built into the left side and the
bottom edge of the display enclosure.
b.
Remove the display panel cable.
The display panel cable is included in the Display Panel Cable Kit, spare part number
701681-001.
8.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna cables from the clips (1) built into the display enclosure.
b.
Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
Component replacement procedures
65