c.
Remove the wireless antenna cables and transceivers.
The wireless antennas are available using spare part number 701676-001.
Reverse this procedure to reassemble and install the display assembly.
Power connector cable
Description
Power connector cable
IMPORTANT:
and replacement.
Before removing the power connector cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the top cover (see
7.
Remove the hard drive (see
8.
Remove the USB board (see
66
Chapter 4 Removal and replacement procedures
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board on page
30).
31).
35).
39).
41).
Spare part number
701682-001