Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FBB63647PM
Summary of Contents for AEG FBB63647PM
- Page 1 FBB63647PM User Manual Dishwasher FBB63647PW USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............27 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH 2.4 Use • Do not use multi-plug adapters and extension cables. • Do not put flammable products or • Make sure not to cause damage to items that are wet with flammable the mains plug and to the mains products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates. Rinse aid indicator. -
Page 8: Programmes
5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, pots, lightly dried- •... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal soil • Prewash cutlery • Dishwashing 60 °C • Intermediate rinse • Final rinse 50 °C • Drying • AirDry 1) This programme offers the most efficient use of water and energy consumption for crockery and cut‐ lery with normal soil.
-
Page 10: Options
5.2 Information for test institutes To receive the necessary information for conducting performance tests (e.g. according to: EN60436 ), send an email to: info.test@dishwasher-production.com In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance. -
Page 11: Settings
ENGLISH 7. SETTINGS 7.1 Programme selection How to enter user mode mode and user mode Make sure the appliance is in programme selection mode. When the appliance is in programme selection mode it is possible to set a To enter user mode, press and hold programme and to enter user mode. - Page 12 German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 4 - 10 7 - 18 0.7 - 1.8 5 - 12 <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level.
- Page 13 ENGLISH How to set the water softener door opens automatically during the drying phase and remains ajar. level Make sure the appliance is in user mode. 1. Press Program. • The indicator still flashes. • The remaining indicators are off. •...
-
Page 14: Before First Use
3. Press the on/off button to confirm the – = AirDry is activated. setting. 2. Press Delay to change the setting. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. -
Page 15: Daily Use
ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. - Page 16 When the countdown is completed, the appliance door. programme starts and the indicator of the 4. Close the lid. Make sure that the lid running phase is on. The indicator locks into position.
-
Page 17: Hints And Tips
ENGLISH End of the programme automatically the appliance when it is not operating. When the programme is complete, the The function comes into operation: Auto Off function switches the appliance • When the programme is complete. off automatically. • After 5 minutes if a programme was All buttons are inactive except for the not started. - Page 18 • Make sure that glass items do not hardness. Refer to the instructions on touch each other. the detergent packaging. • Put light items in the upper basket. • Always use the correct quantity of Make sure that the items do not move rinse aid.
-
Page 19: Care And Cleaning
ENGLISH 11. CARE AND CLEANING 1. Disassemble the filters system as WARNING! instructed in this chapter. Before maintenance, 2. Remove any foreign objects deactivate the appliance and manually. disconnect the mains plug 3. Reassemble the filters as instructed from the main socket. in this chapter. - Page 20 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.5 Cleaning the lower spray...
- Page 21 ENGLISH toothpick, to remove particles of soil from the holes. 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.
-
Page 22: Troubleshooting
1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. To detach the spray arm (C) from the 4. To install the spray arm (C) back,... - Page 23 ENGLISH Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not The display shows i10 or too low.
- Page 24 Problem and alarm code Possible cause and solution The displayed programme • The pressure and the temperature of the water, the var‐ duration is different than the iations of the mains supply, the options, the quantity of duration in the consumption dishes and the degree of soil can change the pro‐...
- Page 25 ENGLISH 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
-
Page 26: Technical Information
Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. -
Page 27: Environmental Concerns
ENGLISH 13.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database and product number that you can find on the rating plate of the appliance. Refer to The QR code on the energy label the chapter "Product description". - Page 28 www.aeg.com/shop...