hit counter code
D-Link G413K User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. G413K
  6. User manual

D-Link G413K User Manual

Lte cat6 fibre wi-fi ac1200 gigabit router
Hide thumbs
Table of Contents

Advertisement

Quick Links

LTE CAT6 Fibre Wi-Fi AC1200 Gigabit Router
G413K
1

Advertisement

Table of Contents
loading

Related Manuals for D-Link G413K

Summary of Contents for D-Link G413K

  • Page 1 LTE CAT6 Fibre Wi-Fi AC1200 Gigabit Router G413K...

  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.10 13 November 2023 Final Release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.

  • Page 3: Table Of Contents

    Preface ......................2 LAN Setting .................... 23 Product Overview ..................1 WAN Setting ..................24 Package Contents ..................1 WAN Access Type .................. 25 System Requirements ................. 2 PPTP Setting ..................27 Introduction ....................3 L2TP Setting ................... 28 Features ...................... 4 GRE Setting ....................
  • Page 4 Wireless ..................... 48 Management ..................... 70 2.4Ghz Basic Settings ................48 Time Zone Setting ................. 70 2.4Ghz Security ..................50 DDNS ..................... 71 2.4Ghz Access Control ................51 Deny of Service ..................72 2.4Ghz Site Survey ................52 Log ......................73 2.4Ghz WPS ...................

  • Page 5: Product Overview

    Quick Install Guide If any of the above items are missing or damaged, please contact your reseller. Note: Using a power supply other than the one included with the G413K may cause damage and void the warranty for this product.

  • Page 6: System Requirements

    System Requirements Network Requirements An active account with an Internet Service Provider using one of the following connection types: • A Mobile connection using a SIM card • A broadband device connected using the WAN port Web-based Configuration Utility Requirements Computer with the following: •...

  • Page 7: Introduction

    Introduction The D-Link G413K LTE CAT6 Fibre Wi-Fi AC1200 Gigabit Router share your internet connection over blazing-fast Wireless AC. Equipped with advanced AC beamforming technology to maximize the speed and range of your wireless signal to significantly outperform 802.11n and other older, non-beamforming capable 802.11ac devices.

  • Page 8: Features

    • Faster Wireless Networking -The G413K is dual-band capable and equipped with four antennas to provide wireless speeds of up to 1200 Mbps* for your wireless devices. It operates on both the 2.4 GHz and 5GHz bands to allow separation of traffic so users can participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without affecting low-priority traffic like email and web surfing.

  • Page 9: Hardware Overview

    Hardware Overview Back Panel Power Button Press to switch router ON/OFF Power Connector Connector for the supplied power adapter. WAN Port Connects to Ethernet WAN devices. Ethernet Ports Connects to Ethernet devices such as computers. WPS button Press and hold for 5 seconds to activate WPS function Wi-Fi on/off button Press and hold for 5 seconds to turn off your 2.4G &...

  • Page 10: Side Panel

    Side Panel SIM Slot Inset a Sim card into this slot for mobile connection...

  • Page 11: Leds

    LEDs Power Solid Green Device is powered on. Solid Green The WAN is properly connected. Blinking Green The WAN is properly connected and data is being transmitted. No connection or Cable not connected properly. LAN 1,2,3,4 Solid Green A device is connected to the Ethernet port. Blinking Green A device is connected to the Ethernet port and data is being transmitted.

  • Page 12: Installation

    Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. Note: This installation section is written for users who are setting up their home Internet service with the G413K LTE CAT6 Fibre Wi-Fi AC1200 Gigabit Router for the first time.

  • Page 13: Wireless Installation Considerations

    The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 1-30 meters. Position your devices so that the number of walls or ceilings is minimized.

  • Page 14: Hardware Installation

    Hardware Installation...

  • Page 15: Getting Started

    Quick Setup Step 1 The Quick Setup menu is used to set up the Internet connection on the G413K. This is the first step in the Quick Setup tool and allows you to choose the connection type. Step 1: Select Interface Type: Please select which WAN interface to use: 3G/4G or ETH.
  • Page 16 (whether the SIM card is active and inserted correctly) For Fibre: please verify that your fibre is active and the cable from the ONT device is plugged into the blue port at the back of the G413K...
  • Page 17 Step 3 If PPPoE Passed then user will need to enter the Username and Password as provided by the Internet Service Provider (ISP). IF DHCP passed device will automatically skip to step 5. Username: Enter your Username here. (Usually looks like an email address like Yourname@telkomsa.net) Password: Enter your Password here.
  • Page 18 Step 4 If connection is on PPPoE device will now test if the configured account is valid. If the test fails, please click on the back button and double check that the details on step 3 are correct. If the details have been entered correctly and step 4 still fails, please contact your Internet Service Provider and request for them to send you new PPPoE details.
  • Page 19 Step 6 In this step you can enter the change the web UI credentials. (The details used to log into the settings page of your router on 10.0.0.2) AdminName: The username to log in to the web UI. AdminPassword: Enter the password here for logging into the web UI. AdminPassword: Enter the password for logging in to the web UI again to confirm.
  • Page 20 Step 8 In this step you can you can review everything for accuracy. Click Back to go back to the pervious page or click Apply to apply all of the configuration settings.

  • Page 21: Configuration

    To access the web interface, open a web browser and enter the IP address of the router (by default this is 10.0.0.2) into the address bar. When the login page of the G413K is displayed, enter the username and password you set on step 4 of the setup wizard. By default, the login details are admin for the username and admin for the password if you chose to not change the details on the wizard.

  • Page 22: Status

    Status The Status menu is used to display the status of your connection either WAN (IPV4/IPv6) or mobile connection (LTE). IPV4 IPV6 Mobile Network...

  • Page 23: Wan Status

    WAN Status This displays Network status information of your WAN profiles.

  • Page 24: Vpn Status

    VPN Status This Displays the L2TP and PPTP VPN connection status.

  • Page 25: User Traffic

    User Traffic This Displays each connected user’s total traffic statistics .

  • Page 26: Statistics

    Statistics The displays all packet counters for transition and reception on wireless and ethernet networks.

  • Page 27: Network

    Network LAN Setting The LAN setting menu is used to set IPv4 Local Area Network settings on the G413K. This allows you to set the IP address settings and DHCP options for IPv4. IP Address: The IP address of the router.

  • Page 28: Wan Setting

    WAN Setting The WAN settings page is used to change your WAN profile settings. Connect Name: Select witch WAN interface to use. Enable: Enable or disable the profile. WAN Access Type: Select with connection method to use DHCP, PPPOE or Static IP.

  • Page 29: Wan Access Type

    WAN Access Type DHCP settings: MTU: Select your MTU size between 1280-1500 bytes. Option 43: Ethernet ports give simultaneously access to both the NTP and PTP servers. Clone MAC Address: Used to clone MAC address. Enable VLAN: Enable or Disable VLAN on WAN profile. PPPOE settings: User Name: Enter the username as provided by your ISP (Internet Service Provider)
  • Page 30 Static IP settings: IP Address: Enter the static IP adress as provided by you ISP (Internet Service Provider). Subnet Mask: Enter a matching subnet mask as provided by you ISP (Internet Service Provider). Default Gateway: Enter the default gateway as provided by you ISP (Internet Service Provider).

  • Page 31: Pptp Setting

    PPTP Setting Enable: Enable or disable the PPTP connection. Server: Enter the server address of your PPTP connection. Username: Enter the username for your PPTP connection. Password: Enter the password for your PPTP connection. MTU: Select your MTU size between 1360-1492 bytes. MPPE: Enable or disable Microsoft Point-to-Point Encryption.

  • Page 32: L2Tp Setting

    L2TP Setting Enable: Enable or disable the L2TP connection. Server: Enter the server address of your L2TP connection. Username: Enter the username for your L2TP connection. Password: Enter the password for your L2TP connection. MTU: Select your MTU size between 1360-1492 bytes.

  • Page 33: Gre Setting

    GRE Setting You can config the parameters for Internet network which connects to the GRE. Enable: Enable or disable the GRE connection. Local Host Address: Enter the IP address of your local host. Remote Host Address: Enter the IP address of your remote host. Tunnel Address: Enter the IP address of your tunnel host.

  • Page 34: Vpn Lite

    VPN Lite You can config the parameters for VPN lite. Enable: Enable or disable the VPN lite connection. Username: Enter your VPN lite username as provided by your ISP. Password: Enter your VPN lite password as provided by your ISP. LAN IP/Netmask: Enter IP address and subnet mask as provided by your ISP.

  • Page 35: Ipv6 Wan Setting

    IPv6 WAN Setting You can config the parameters for Internet network which connects to the WAN port of your Router. Enable: Enable or disable the IPv6 connection. Origin Type: Auto Address Mode: Select between Stateful or Stateless Address type. PD Enable: Enable or disable the IPv6 Prefix Delegation. Origin Type: Static IP Address: Enter your static IPv6 address.
  • Page 36 Origin Type: 6RD 6RD IPv6 Prefix: Enter your IPv6 Prefix address. WAN IPv4 Address: Enter WAN IPv4 address. 6RD Border Relay IPv4 address: Enter you IPv4 relay IP address. DNS: Enter your IPv6 DNS address. Enable MLD Proxy: Enable or disable MLD Proxy. Enable wan dslite: Attain AFTR Automatically: Enable if you want to attain AFTR automatically.

  • Page 37: Ipv6 Lan Setting

    IPv6 LAN Setting This page config DHCPv6 and RADVD, Interface Id does NOT support ZERO COMPRESSION "::",Please enter the complete information. For example: Please enter "0:0:0:2" instead of "::". IP Address: Enter your LAN IPv6 address. DHCPv6 Server Enable: DNS Addr: Enter your DNS address. Address Mode: Select between Stateful or stateless addresses.
  • Page 38 RADVD Enable: Prefix: Select between Manually and Prefix delegation (auto). AdvValidlifetime: Enter the lifetime counter. AdvPreferredlifetime: Enter the preferred lifetime counter. Prefix: If you selected Manually, you can enter your IPv6 Prefix. Tunnel (6 over 4): Enable: Select if you want to enable iPv6 tunnelling over IPv4.

  • Page 39: Vlan Bridge

    VLAN Bridge VLAN ID (1-4095): Select the VLAN ID you want to bridge the select with interfaces/ports you want your VLAN bridge to passthrough. Current VLAN Table: You will see all your VLAN bridges in this table.

  • Page 40: Default Route

    Default Route You can select which wan connection as default gateway route. If not, system will auto select a connect up wan as default gateway route.

  • Page 41: Static Route

    Static Route Once connected to the Internet, your router automatically builds routing tables that determine where traffic should be sent. Static routes can override this process, allowing traffic to be directed to a specific client or location. Enable Static Route: Enable or Disable static route. IP Address: Enter your static router IP address.

  • Page 42: Ping Check

    Ping Check You can configure the ping check parameter. If multiple IP addresses are configured, it will be confirmed that the network is unavailable if all are unavailable. The default ping check timing is set to 120 seconds. Please specify your preferred timing within the range of 30 to 120 seconds.

  • Page 43: Lte

    Basic Settings Enable: Enable or Disable LTE/3G WAN profile User Name: Enter your LTE user name as specified by your ISP. Password: Enter your LTE password as specified by your ISP. APN: Enter you APN as specified by your ISP. PIN: Enter the PIN code of your sim card.

  • Page 44: Pin Manage

    PIN Manage You can configure your SIM PIN...

  • Page 45: Sms Send

    SMS Send This page is used to send SMS’s...

  • Page 46: Sms Inbox

    SMS Inbox This page lists all the SMS messages that in your inbox. You can create messages, delete messages, and read messages.

  • Page 47: Sms Outbox

    SMS Outbox This page lists all the SMS messages that in your outbox, and you can delete them.

  • Page 48: Sms Settings

    SMS Settings SMS Settings page, you can set the SMS stored in the SIM card or module.

  • Page 49: Ussd

    USSD You can send a command to the network (have predefined numbers or symbols), the network will be based on the instruction for you to provide the corresponding services.

  • Page 50: At Command

    At Command This page is used to get the result of at command.

  • Page 51: Data Cap

    Data Cap You can monitor the data usage in real-time and receive alert message when data usage allowance reached. Data Cap Allowance 0 MB will be not limit.

  • Page 52: Wireless

    Wireless 2.4Ghz Basic Settings You can config the parameters for wireless LAN clients which may connect to your Router. Here you may change wireless encryption settings as well as wireless network parameters. Disable Wireless LAN Interface: Enable if you want to turn off the 2.4GHz Wi-Fi.
  • Page 53 Enable Universal Repeater Mode: Enables the Wi-Fi repeater function of the router so you can extend existing wireless networks.

  • Page 54: 2.4Ghz Security

    2.4Ghz Security This page allows you setup the wireless security. Turn on WEP/WPA2/WPA-MIXED/WPA3/WPA2-WPA3-MIXED by using Encryption Keys could prevent any unauthorized access to your wireless network. Select SSID: Select your SSID. Encryption: Select the encryption type. Authentication Mode: Select your authentication method Enterprise or pre-shared key.

  • Page 55: 2.4Ghz Access Control

    2.4Ghz Access Control If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the access control list will be able to connect to your Router. When 'Deny Listed' is selected, these wireless clients on the list will not be able to connect the Router.

  • Page 56: 2.4Ghz Site Survey

    2.4Ghz Site Survey This page provides tool to scan the wireless network. If any Router or IBSS is found, you could choose to connect it manually when client mode is enabled.

  • Page 57: 2.4Ghz Wps

    2.4Ghz WPS This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless client automatically synchronize its setting and connect to the Router in a minute without any hassle.

  • Page 58: 2.4Ghz Schedule

    2.4Ghz Schedule This page allows you setup the wireless schedule rule. Please do not forget to configure system time before enable this feature.

  • Page 59: 5Ghz Basic Settings

    5Ghz Basic Settings: You can config the parameters for wireless LAN clients which may connect to your Router. Here you may change wireless encryption settings as well as wireless network parameters. Disable Wireless LAN Interface: Enable if you want to turn off the 5GHz Wi-Fi.
  • Page 60 Enable Universal Repeater Mode: Enables the Wi-Fi repeater function of the router so you can extend existing wireless networks.

  • Page 61: 5Ghz Security

    5Ghz Security This page allows you setup the wireless security. Turn on WEP/WPA2/WPA-MIXED/WPA3/WPA2-WPA3-MIXED by using Encryption Keys could prevent any unauthorized access to your wireless network. Select SSID: Select your SSID. Encryption: Select the encryption type. Authentication Mode: Select your authentication method Enterprise or pre-shared key.

  • Page 62: 5Ghz Access Control

    5Ghz Access Control If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the access control list will be able to connect to your Router. When 'Deny Listed' is selected, these wireless clients on the list will not be able to connect the Router.

  • Page 63: 5Ghz Site Survey

    5Ghz Site Survey This page provides tool to scan the wireless network. If any Router or IBSS is found, you could choose to connect it manually when client mode is enabled.

  • Page 64: 5Ghz Wps

    5Ghz WPS This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless client automatically synchronize its setting and connect to the Router in a minute without any hassle.

  • Page 65: 5Ghz Schedule

    5Ghz Schedule This page allows you setup the wireless schedule rule. Please do not forget to configure system time before enable this feature.

  • Page 66: Easymesh

    EasyMesh You can config the parameters for EasyMesh feature of your Router. The controller is the master device and is used to connect to the external network. Agent is a slave device, which is used to connect the controller or other agent. When configured as agent, this device will be used as bridge and DHCP server is closed, the WAN port becomes the LAN port.

  • Page 67: Features

    Features Advanced Your router's high-performance firewall feature continuously monitors Internet traffic, protecting your network and connected devices from malicious Internet attacks. Enable DMZ: Enable demilitarized zone. Enable UPNP: Enable Universal Plug and Play. Enable IGMP Proxy: Enable Internet Group Management Protocol. Enable Ping Access on WAN: Enable the ping command on WAN connection.

  • Page 68: Port Filtering

    Port Filtering Entries in this table are used to restrict certain types of data packets from your local network to Internet through the Gateway. Use of such filters can be helpful in securing or restricting your local network. Enable Port Filtering: Enable the port filtering feature. Enable IPv4: Select if you are using IPv4.

  • Page 69: Ip Filtering

    IP Filtering Entries in this table are used to restrict certain types of data packets from your local network to Internet through the Gateway. Use of such filters can be helpful in securing or restricting your local network. Enable IP Filtering: Enable the IP filtering feature. Enable IPv4: Select if you are using IPv4.

  • Page 70: Mac Filtering

    MAC Filtering The mac filtering is used to block or allow specific devices via their mac addresses on your network. Mode: Use Whitelist to allow specific devices and use Blacklist to block. MAC Address: Enter the mac address of the device you want to block or allow.

  • Page 71: Port Forwarding

    Port Forwarding Entries in this table allow you to automatically redirect common network services to a specific machine behind the NAT firewall. These settings are only necessary if you wish to host some sort of server like a web server or mail server on the private local network behind your Gateway's NAT firewall.

  • Page 72: Url Filtering

    URL Filtering URL filter is used to deny LAN users from accessing the internet. Block those URLs which contain keywords listed below. Enable URL Filtering: Enable the URL filtering feature. Deny URL address (black list): Select if you want to block URL addresses. Allow URL address (white list): Select if you want to allow URL addresses.

  • Page 73: Qos

    Entries in this table improve your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web. Enable QoS: Enable the QOS feature. Automatic Uplink Speed: Select if you want to use auto uplink speed and unselect if you want to set the uplink speed manually.

  • Page 74: Management

    Management Time Zone Setting You can maintain the system time by synchronizing with a public time server over the Internet. Current Time: Set your current time Year-Month-Day- Hour-Minute-Seconds. Copy LAN time: Select if you would like to use LAN time (computer time).

  • Page 75: Ddns

    DDNS Dynamic DNS is a service, that provides you with a valid, unchanging, internet domain name (an URL) to go with that (possibly everchanging) IP-address. Enable DDNS: Enable to use DDNS service. Status: Shows current status of DDNS account. IP Address: Will show your IP address. Service Provider: Select which DDNS service provide you have a account with DynDNS, No-IP, TZO or FreeDNS.

  • Page 76: Deny Of Service

    Deny of Service A denial-of-service (DoS) attack is characterized by an explicit attempt by hackers to prevent legitimate users of a service from using that service.

  • Page 77: Log

    This page can be used to set remote log server and show the system log. Enable Log: Enable to enable log service. Enable Remote Log: Enable to enable remote log service. Log Server IP Address: Enter the IP address of your remote server. Log Server Port: Enter the port number of your remote server.

  • Page 78: Password

    Password This page is used to set the account to access the web server of Router. Empty user name and password will disable the protection.

  • Page 79: Ping Diagnostic

    Ping Diagnostic This page gives you various diagnostics about ping for IP connection.

  • Page 80: Traceroute

    Traceroute This page gives you various diagnostics about traceroute for IP connection.

  • Page 81: System Settings

    System Settings: This page allows you save current settings to a file or reload the settings from the file which was saved previously. Besides, you could reset the current configuration to factory default.

  • Page 82: Auto Reboot

    Auto Reboot 'Auto Reboot' is the feature which can do the Reboot automatically at a specified time. Please note: 'Auto Reboot' depend on the 'NTP Server’, you have to enable the 'NTP Server' when use this feature. For example. Period Days is 2, Reboot Time is 03:00, the system will automatically reboot at 3 o'clock every 2 days.

  • Page 83: Upgrade Firmware

    Upgrade Firmware This page allows you upgrade the Router firmware to new version. Please note, do not power off the device during the upload because it may crash the system.

  • Page 84: Logout

    Logout This page is used to logout of the web GUI.

  • Page 85: Connect A Wireless Client To Your Router

    Windows® 10 When connecting to the G413K wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here.
  • Page 86 Windows® 8 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. 1.
  • Page 87 Windows® 7 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1.
  • Page 88 The WPS feature of the G413K can be configured using WindowsR 7 and up. Carry out the following steps to use WindowsR 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.
  • Page 89 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. 5. Type a name to identify the network. 6. To configure advanced settings, click the Arrow icon. Click Next to continue.
  • Page 90 7. The following window appears while the G413K is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the G413K has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.

  • Page 91: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (10.0.0.2 for example), make sure you are not connected to a website, you don’t have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 92 • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration.
  • Page 93 To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (WindowsR NT, 2000, XP, VistaR, 7, 8.x, and 10 users type in cmd) and press Enter (or click OK).

  • Page 94: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to access the data you want, when, and where you want it.
  • Page 95 PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology has become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it.
  • Page 96 “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centres. A wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
  • Page 97 • Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more G413K wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
  • Page 98 Networking Basics After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
  • Page 99 Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7- Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adaptor Options Windows®...
  • Page 100 Wireless Security This section will show you the different levels of encryption you can use to help protect your data from intruders. The G413K offers the following types of security: • WPA3 (Pre-Shared Key) • WPA2 (Wi-Fi Protected Access 2) •...

  • Page 101: Technical Specifications

    Technical Specifications Device Interfaces Wi-Fi Encryption • WPA™ - Personal/Enterprise • WPA2™ - Personal/Enterprise • 4 x RJ-45 Gigabit Ethernet LAN ports • WPA3™ - Personal/Enterprise • 1 x RJ-45 Gigabit Ethernet WAN port • Wi-Fi Protected Setup (WPS) PIN/PBC •...

  • Page 102: Regulatory Information

    Regulatory Information CE EMI Class A Warning This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. Frequency Band(s) Max. Output Power (EIRP) Frequenzband Max. Output Power Fréquence bande(s) Consommation d’énergie max. Bandas de Frecuencia Potencia máxima de Salida Frequenza/e...

Table of Contents