Advertisement
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools and
‰
equipment.
DO NOT use if damaged.
8
Maintain in good and clean condition for best and safest performance.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the work area.
9
Ensure that the motorcycle is safely positioned and secured.
8
2. INTRODUCTION
Breaks and re-joins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range
of pins, dies and detailed instructions. Chain link pulling tool is a useful third hand tool for pulling chain ends together while re-linking.
3. CONTENTS
Note: Refer to diagram below for complete list of individual contents. Refer to attached Parts List for Model numbers of parts available as
replacements.
Note: Part numbers 7, 8, 9, 10, 12, 19 are fitted into C body 6 on delivery of product.
© Jack Sealey Limited
MOTORCYCLE CHAIN MAINTENANCE KIT
MODEL NO:
Wear safety
footwear
Original Language Version
VS779KIT
Link to web
instructional
video
VS779KIT
Issue 2 (1)
29/03/23
Advertisement
Table of Contents
Related Manuals for Sealey VS779KIT
Summary of Contents for Sealey VS779KIT
- Page 1 VS779KIT MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Use the press plate with the two holes in the upper jaw (4 or 5) and the grooved press plate in the lower jaw (3). 4.2.11. It is also possible to use a combination of the riveting tip (15) and lower press plate as fig.4. fig.3 fig.2 fig.4 VS779KIT Issue 2 (1) 29/03/23 © Jack Sealey Limited Original Language Version...
- Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...