Safety instructions Keep children below the age of Installation 8 years old at a safe distance Following installation, ensure from the appliance and power ■ that the back cable. of the dishwasher is not freely accessible (protection Before you switch ON the against contact due to hot appliance surface).
Safety instructions If the dishwasher is installed Do not install the appliance ■ ■ below or above other near heat sources (radiators, domestic appliances, follow heat storage tanks, cookers the information for installation or other appliances which in combination with generate heat) and do not a dishwasher install under a hob.
Safety instructions Childproof lock (door lock) Warning D o o r l o c k Risk of injury! The description of the childproof lock is at the back in To prevent injuries, e.g. ■ the envelope. caused by stumbling, open the dishwasher only briefly * depending on model in order to load and unload...
Page 8
Safety instructions Keep children away from ■ Warning open dishwasher. There may Risk of explosion! be small parts in the Do not add any solvents dishwasher which children to the washing chamber. could swallow and the water Danger of explosion! inside the dishwasher is not drinking water as it may Warning...
Protection of the environment Protection of the Getting to know your environment appliance P r o t e c t io n o f th e e n v i ro n m e n t G e t tin g to k n o w y o u r a p p l ia n c e Both the packaging of new appliances Diagrams of the control panel and the old appliances themselves...
Water softening system/Special salt Appliance interior Water softening system/Special salt 1" Top basket W a t e r s o f te n i n g s y s te m /S p e c i a l s a l t 1* Knife shelf * To ensure good washing results, 12 Tablet collecting tray...
Water softening system/Special salt Setting 5. Press and hold down the START button @. 6. Rotate programme selector 8 until The amount of salt dispensed can be the salt refill indicator ` flashes. set in 4 stages depending on the hardness of your 7.
Water softening system/Special salt Using special salt Using detergents with salt component D e t e r g e n t s w i t h s a l t c o m p o n e n t Always refill with special salt immediately before switching on the If combined detergents with a salt appliance.
Rinse aid 2. Carefully pour rinse aid up Rinse aid to the max. mark in the filler opening. R in s e a i d As soon as the rinse-aid refill indicator X is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes.
Utensils Setting amount of rinse aid Utensils The amount of rinse aid dispensed can U te n s ils be set in 4 stages. Accordingly 0, 1, 2 Not suitable or 3 displays are lit (see water hardness table). Cutlery and utensils made of wood. ■...
Utensils Loading the dishwasher Cups and glasses Top basket 1" 1. Remove large food remnants. It is not necessary to prerinse utensils under running water. 2. Place the utensils so that – they are secure and cannot tip over. – all utensils with their openings face down.
Utensils Pans Cutlery basket Bottom basket 1b You should always place cutlery unsorted with the points downwards. To prevent injuries, place long, pointed implements and knives on the knife shelf. E tagere * E t a g e r e Heavily soiled utensils (pans) should The etagere and the space underneath be placed in the bottom basket.
Utensils F olding spikes * Knife shelf * F o l d i n g s p i k e s K n i f e s h e l f * depending on model * depending on model The spikes can be folded down to Long knives and other utensils can be improve arrangement of pans, bowls arranged horizontally.
Detergent Top basket with side levers Detergent 1. Pull out the top basket 1" out. D e t e r g e n t You can use tablets as well as powder 2. To lower the basket, press in the left or liquid detergents for dishwashers, but and then the right lever on the never use washing-up liquid.
Detergent Adding detergent 2. Close the cover on the detergent dispenser by sliding it up until the lock engages without difficulty. 1. If the detergent dispenser 9" is still closed, press the lock 9* to open the detergent dispenser. Pour detergent into the dry detergent dispenser 9"...
Detergent Combination detergent Notes You will obtain optimum rinsing ■ Apart from conventional detergents and drying results by using solo (Solo), a number of products are offered detergents and applying salt with additional functions. These and rinse aid separately. products contain not only the detergent If programmes are short, tablets ■...
Overview of programmes Overview of programmes O v e r v i e w o f p r o g r a m m e s The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia.
Additional options Ï Programme selection Intensive zone * I n t e n s i v e z o n e You can select a suitable programme Perfect for a mixed load. You can wash according to the type of utensils and very soiled pots and pans in the lower degree of soiling.
Operating the appliance Switching on the appliance Operating the appliance 1. Turn on the tap fully. 2. Close the door. O p e r a t in g th e a p p l ia n c e 3. Switch on ON/OFF switch (. Programme data The Cleaning display )* flashes.
Operating the appliance T imer programming * T erminating the programme T i m e r p r o g r a m m i n g T e r m i n a t i n g t h e p r o g r a m m e (Reset) * depending on model 1.
Cleaning and maintenance Never use a steam cleaner to clean your Cleaning and dishwasher. The manufacturer is not liable for any consequential damage. maintenance Regularly wipe the front of the appliance C le a n i n g a n d m a i n t e n a n c e and fascia with a damp cloth;...
Cleaning and maintenance Filters Spray arms The filters 1R keep large foreign Limescale objects in the rinsing water away from and contaminants in the rinsing water the pump. These foreign objects may may block nozzles and bearings on the spray arms 1: occasionally block the filters.
Fault, what to do? In this case: Fault, what to do? 1. First always disconnect F a u l t, w h a t to d o ? the appliance from the power supply. Experience has shown that you can 2.
Fault, what to do? Fault table Fault Cause Remedial action “Check water supply” Supply hose kinked. Install supply hose without kinks. display h lights up. Tap turned off. Turn the tap on. Tap jammed or calcified. Turn the tap on. Flow rate must be min.
Page 29
Fault, what to do? Fault Cause Remedial action Displays flash. Door not closed properly. Close the door. Ensure that no objects (utensil, fragrance dispenser) are protruding over the basket and preventing the door from closing. Refill indicator for salt ` No rinse aid.
Page 30
Fault, what to do? Fault Cause Remedial action Cutlery not dry. Cutlery not arranged properly in Separate cutlery if possible, prevent contact the cutlery basket. points. Cutlery not arranged properly in Arrange cutlery properly and separate if the cutlery drawer. possible.
Page 31
Fault, what to do? Fault Cause Remedial action Detergent residue. Detergent dispenser cover Detergent dispenser cover must not be blocked by utensils and therefore obstructed by utensils. does not open fully. Do not place utensils or fragrance dispenser in the tablet collecting tray. Detergent dispenser cover Tablet must be inserted flat and not upright.
Page 32
Fault, what to do? Fault Cause Remedial action White, stubborn coatings; Detergent substances are Change detergent brand. limescale on the utensils, deposited. These coatings cannot Clean appliance mechanically. container or door. usually be removed with chemicals (appliance cleaner, ...). Hardness range incorrectly set or Set water softening system according to water hardness greater than 8.9 instructions for use or top up salt.
Page 33
Fault, what to do? Fault Cause Remedial action Plastic parts discoloured. Too low rinsing temperature. Select programme with higher washing temperature. Utensils precleaned too intensely; Do not prerinse utensils. Remove only large sensors therefore decide on food remnants. weak programme sequence. Recommended programme Eco 50°...
Page 34
Fault, what to do? Fault Cause Remedial action Appliance does not start. The mains fuse has tripped. Check mains fuse. Power cord not inserted. Ensure that the power cord is plugged all the way into the back of the appliance and into the socket.
Page 35
Fault, what to do? Fault Cause Remedial action Knocking or rattling noise. Spray arm strikes the utensils, Position utensils so that the spray arms do utensils not positioned correctly. not strike the utensils. If there is a low load, the water Load the appliance with more utensils or jets strike the washing tank distribute the utensils more evenly in the...
Customer service Customer service Installation and connection C u s to m e r s e r v i c e If you are unable to rectify the fault, In s ta l la t io n a n d c o n n e c t io n please contact your customer service.
Installation and connection Product package Technical specifications If you have any complaints, contact Weight: the dealer where you purchased max. 45 kg the appliance or our customer service. Voltage: Dishwasher ■ 220–240 V, 50 Hz or 60 Hz Instructions for use ■...
Installation and connection Installation Drinking water connection The required installation dimensions can 1. Fasten the drinking water connection be found in the installation instructions. to the tap according Level the appliance with the aid of the to the installation instructions using height-adjustable feet.
Installation and connection Electrical connection Removing the appliance Connect the appliance to an Also observe ■ alternating current only, ranging from the sequence of worksteps here. 220 V to 240 V and 50 Hz or 60 Hz 1. Disconnect the appliance from via a correctly installed socket with the power supply.
Installation and connection Transportation Protection against frost P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e ) Empty the dishwasher and secure loose If the appliance is in a room where there parts.
Page 42
*9000830553* 9000830553 en (9808) 440EA...