hit counter code
Kenwood FleetSync 80 Series Application Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Portable Radio
  5. FleetSync 80 Series
  6. Application manual

Kenwood FleetSync 80 Series Application Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

TABLE OF CONTENTS

INTRODUCTION

Kenwood Communication Corporation has recently released 80 Series Version 2 radios with
some New added FleetSync™* features. FleetSync™ is a two-way paging protocol that extends
communication capability in the 80-Series family of radios. This application guide is designed to
help you understand its features and show you how they may be implemented in a radio system.
To get started, first read Understanding FleetSync (on the next page) and then scan through the
remaining pages to familiarize yourself with some typical FleetSync applications. If needed, also
study the Accessory Interfaces and Troubleshooting sections to solve the most common problems.
If you need further help with your system planning, please contact our Land Mobile Radio
Technical Support department at: 800-752-0987
Or, visit our Dealer Tools at: WWW.DealerToolsKenwood.net
*FleetSync is a trademark of Kenwood Communication Corporation.
11/01 Rev 2.0
FleetSync Application Guide
...1
...2
...2
...4
Over-The-Air Stun/Revive
...5
...5
...5
...6
...7
...8
...9
..10
80 Series Version 2
..11
..12
..13
..14
..16
..16
..17
..18
..19
1

Advertisement

Table of Contents
loading

Related Manuals for Kenwood FleetSync 80 Series

Summary of Contents for Kenwood FleetSync 80 Series

  • Page 1: Table Of Contents

    ..10 INTRODUCTION Kenwood Communication Corporation has recently released 80 Series Version 2 radios with some New added FleetSync™* features. FleetSync™ is a two-way paging protocol that extends communication capability in the 80-Series family of radios. This application guide is designed to help you understand its features and show you how they may be implemented in a radio system.

  • Page 2: About Fleetsync

    FleetSync Application Guide ABOUT FLEETSYNC FleetSync is a signaling protocol that is integrated into Kenwood’s 80-Series line of radios to work with the on-board modem for signal modulation over the air-waves via two transceivers. Furthermore, the modem is linked with the radio’s CPU for serial communication between the radio and a PC.
  • Page 3 11. Most FleetSync PC applications and some peripheral equipment (e.g., ANI decoder display units) may require the FleetSync PC Serial Control feature to communicate with the Kenwood 80-Series mobile unit, especially the base radio. For instance, the base station 80-Series radio will require the FleetSync PC Serial Control function when a PC is running CAD software, and therefore the FleetSync “Enhanced”...

  • Page 4: Fleetsync Radio Versions

    Version 2. These radios can be identified by the logos located on the radio front panel. The mobile units logo has been changed from a white Kenwood logo to a Orange logo. The portables Kenwood logo’s triangle [above the “W”] has been changed from white to orange. The Model/FCC ID label will read Ver- 2.

  • Page 5: Fleet And Id Number Format

    Usage and an Application. Numerous FleetSync applications are possible with support software and peripheral equipment. For further information, refer to the FleetSync programming Guide available from Dealer Tools or contact Kenwood Technical Support. PTT ID / DIGITAL ANI CALLING Definition: PTT ID or PTT ANI ( Alpha numeric identifie r) is a FleetSync feature that will identify a radio on transmit.

  • Page 6: Caller Id

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) CALLER ID (CID) Definition: The FleetSync PTT ID can be displayed on the front panel of the radio by enabling the Feature “CALLER ID DISPLAY” Usage The ANI information of the transmitting radio can be displayed on the receiving radios front panel identifying the user who is talking.

  • Page 7: Selective Alert / Individual Call

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) SELECTIVE Alert / Individual Call Definition: FleetSync protocol will allow a user to select and alert a radio that a call has been received. This will keep the other radio users in the same talk group from hearing unwanted radio conversations.

  • Page 8: Selective Alert / Fleet Call

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) SELECTIVE Alert / Fleet Call Definition: FleetSync protocol will allow a user to select and alert a specific fleet of radios that a call has been received. This will keep the other radios that are not within the same Fleet from hearing conversations.

  • Page 9: Selective Alert / Supervisor Call

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) only and SelCall is used to set off alert responses in a particular unit or groups of units when needed. b. Use AND if fleet units are to remain muted until both valid QT/DQT/LTR signaling and a SelCall are received (i.e., the units are operated in a selective call “page”...

  • Page 10: Selective Alert / Broadcast Call

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) Figure 4 NOTE: In shared systems, Supervisor Calling should be carefully implemented so that all user groups with the same ID number are not called inadvertently. In both shared and private radio systems, Fleet/ID number organization and programming parameters such as Inter-Fleet Call, Manual Dial, and Unit ID Encode Block can be used to control Selective Calling capabilities of each FleetSync radio.

  • Page 11: Status Messaging

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) Figure 5 STATUS MESSAGING General Dispatch Definition: Transmits a Pre-Defined (Dealer Programmable) Status Message to a specific radio or group of radios. Usage: Rather than tying up a radio system with voice communications, a simple dispatch message will help make all users more efficient.

  • Page 12: Emergency Alert

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) Figure 6 Note: When sending Status to groups of radios, the “Complete” acknowledgement will not display. Emergency Alert Definition: FleetSync radios can send an Emergency Message telling the targeted radio that a user is in trouble.

  • Page 13: Emergency Alert Man-Down

    80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) Figure 7 NOTES: 1. The “Emergency Calling” features operate in conjunction with FleetSync Emergency Status Message decoding. See the “FleetSync Programming Guide” for details. 2. Emergency Calling can only be done to a particular Fleet/ID. Broadcast, Group and Supervisor calls are not supported.
  • Page 14 80 Series Version 2 FleetSync Application Guide BASIC FEATURE SET APPLICATIONS (continued) Over-the-Air Stun and Revive Definition: The FleetSync radios use the reserved Special Status to Disable/Enable a radio in a fleet over the air. Special Status 90 Disables Transmitter Specia l Status 91 Disables Transmitter/Receiver Special Status 92...
  • Page 15 80 Series Version 2 FleetSync Application Guide Figure 8 NOTES: 1. Stun can be set to inhibit transmit only or both transmit and receive speaker audio. 2. Stun “commands” (i.e., Status No.’s 90-94 in a special reserved block 80-99) can be inhibited on fleet units (i.e., limited to base mobile units only).

  • Page 16: Enhanced Feature Set Applications

    L-905 – L907 Order FleetSync Dealer enhanced retrofit kit (See Price Pages) The FleetSync Enhanced Option can be enabled at Kenwood or can be retrofitted in the field. Please see LMR price pages for FleetSync Enhanced Option installation Labor Codes.

  • Page 17: Short Text Messaging

    80 Series Version 2 FleetSync Application Guide ENHANCED FEATURE SET APPLICATIONS (continued) SHORT TEXT MESSAGING Definition: A 48 Character Alphanumeric message can be sent to a radio. Usage: Names/Phone Numbers/Addresses etc., can be sent to a radio without tying up valuable airtime.

  • Page 18: Long Text Messaging

    Figure 10 NOTE: An 80-Series Kenwood radio is limited to sending and receiving a maximum of one (1) Long Text Message of up to 1,024 alphanumeric characters in length. FleetSync-compatible dispatch software and mobile data devices are required to send and/or receive and store more than one Long Text Message.

  • Page 19: About Gps/Avl Data

    Application Software. Please see LMR price pages for FleetSync Enhanced Application Software. A Kenwood 80-Series mobile radio can use raw NMEA-0183 location data from a GPS receiver, and then encode this information with standard NMEA-0183 header words, FleetSync ID numbers, and/or Status with the NMEA-0183 location information. This packetized data is then sent over-the-air to a compatible base station via a modulated signal created by the mobile radio’s...

  • Page 20: Gps/Avl Mapping/Fleet Management

    80 Series Version 2 FleetSync Application Guide ENHANCED FEATURE SET APPLICATIONS GPS/AVL MAPPING AND FLEET MANAGEMENT (CONTINUED) Kenwood Communications Corporation 2201 E. Dominguez Street P.O. Box 22755 Long Beach, CA 90801-5745 11/01 Rev 2.0...

Table of Contents