Table of Contents
Advertisement
Quick Links
IMPORTANT:
THESE INSTRUCTIONS ARE TO
REMAIN WITH THE HOMEOWNER
SAFETY NOTICE
If this stove is not properly installed, a
house fire may result. For your safety,
follow the installation instructions. Contact
local building or fire officials about
restrictions and installation inspection
requirements in your area.
TESTED and LISTED to CAN/ULC S627
AND UL 1482
Meets the Environmental Protection Agency's
May 2015 Particulate Emission Standards
©PACIFIC ENERGY FIREPLACE
310316-24
PRODUCTS LTD. - 2016
INSTALLATION
AND OPERATING
INSTRUCTIONS
MODEL - NEO 2.5
SERIES - A
NEO25
SERIAL #
5055.900
Advertisement
Table of Contents
Related Manuals for Pacific energy NEO 2.5
Summary of Contents for Pacific energy NEO 2.5
- Page 1 TESTED and LISTED to CAN/ULC S627 AND UL 1482 Meets the Environmental Protection Agency's May 2015 Particulate Emission Standards MODEL - NEO 2.5 SERIES - A ©PACIFIC ENERGY FIREPLACE 310316-24 NEO25 5055.900...
-
Page 2: Table Of Contents
Label ..........................23 PLEASE SAVE THESE INSTRUCTIONS This manual describes the installation and operation of the Pacific Energy, NEO 2.5 Freestanding wood heater. This heater meets the 2015 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold Model NEO 2.5 2.9g/hr. -
Page 3: Safety
Chimney fires are easy to detect; they usually involve one or more of the following: -Flames and sparks shooting out of the top of the chimney -A roaring sound -Vibration of the chimney 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 4: Operation
Contact may cause skin burns. igniting in five minutes it is soaked and should not be burnt. Your PACIFIC ENERGY heater is designed for many years of Lighting a Fire trouble free operation. Over firing the appliance will shorten the life of the product. -
Page 5: Restarting After Extended Or Overnight Burns
WARNING: IF YOU CHOOSE TO STORE WOOD BENEATH YOUR UNIT, EXERCISE EXTREME CAUTION WHEN LOADING THE WOODSTOVE. EMBERS CAN FALL AND MAY IGNITE WOOD BENEATH STOVE. 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 6: Maintenance
Periodically inspect seals and replace if necessary. Follow instructions included in the WODC.NEODGKIT kit DO NOT OPERATE WITH BAFFLE ASSEMBLY OR obtainable from your nearest Pacific Energy Dealer. INSULATION REMOVED. 5. DOOR GLASS - Do not slam loading door or otherwise Remove retaining pin at the back top of the firebox, just under impact glass. -
Page 7: Maintenance Checks
- Please contact your dealer if you experience any of the damage listed above. Continuing to operate your stove with broken parts may accelerate damage to other parts and may void your warranty 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 8: Assembly
NEO 2.5 Dimensions FIG. #1 24 1/2" 622mm 29" 6 1/8" 737mm 156mm 41" 1.04m 40 1/8" 1.02m Assembly Side Panel Removal/Installation 1) To remove the panels, first remove the screws that secure the panel to the rear shield. Fig. #3... -
Page 9: Ember Protection
If blockage occurs, flue gases may enter living space. 16" [406mm] (Type 1 floor protector - approved to UL1618) Minimum 20GA steel ©PACIFIC ENERGY FIREPLACE 310316-24 PRODUCTS LTD. -
Page 10: Residential Installation
10 feet (3 m.). The installation must meet all local codes. Minimum system height is 15 feet (4.6 m.) (measured from base of appliance). 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. - Page 11 11" 5" 11" 5" 279mm 127mm 279mm 127mm 3" 15 5/8" 8" 76mm 397mm 8" 8" 203mm 203mm 203mm 22 1/2" 22 1/2" 572mm 572mm 3" Alcove: Min. Height 7' 76mm Max. Depth 3' 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
- Page 12 Hooded vent or 90 elbow turned * 4"(102mm) diameter air inlet with rodent screen down * If the crawl space is well ventilated it is not necessary to extend air inlet to outside 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
- Page 13 * 4"(102mm) diameter air inlet with Hooded vent or rodent screen 90 elbow turned down * If the crawl space is well ventilated it is not necessary to extend air inlet to outside 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
-
Page 14: Mobile Home Installation
(Seal securely.) Attach rain cap and check flashing for leaks. 8. Install connector and chimney as per manufacturer's instructions. 9. Attach stove to flooring using two 1/4"(6mm) x 2"(51mm) or longer lag screws. 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 15: Optional Blower
"Man" and set the speed control to desired setting. This will bypass the sensing device and allow full control of the blower. Switching from "Auto" to "Man" or selecting speed may be done anytime. FIG. #10 PIPE SHIELD (NE25.78725) OUTSIDE AIR ADAPTER (OAIR.1A) 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 16: Troubleshooting
1. Combustion air supply blocked - Check outside air supply for obstruction - Check that room air cover is removed 2. Draft too low - Chimney plugged or restricted, inspect and clean - Chimney oversized or otherwise unsuitable, consult Dealer 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. -
Page 17: Replacement Parts - Neo 2.5
9.... Door Handle Assembly ......NE16.7817 27..Pipe Shield(optional) ......NE25.78725 10 ..Side Shield Bracket, LHS ....NE25.78485 All parts may be ordered from your nearest Pacific Energy dealer. Use www.pacificenergy.net for the location of the dealer nearest you. -
Page 18: Understanding & Operating Your Pacific Energy Stove
Understanding & Operating Your Pacific Energy Stove The Pacific Energy SUPER SERIES line of woodstoves is a OPERATING TIPS culmination of years of research and development. Designed to be efficient, clean-burning and user-friendly, this heater will 1. Always use dry, seasoned firewood, up to 18" long. -
Page 19: Firebrick Installation Instructions
Firebrick Installation Instructions NEO 2.5 This package contains 18 full-size firebricks, as well as 6 various cut-size bricks. With the heater in the upright position, install firebricks as follows: - Install the rear firebricks, 4 full-size, two on each side of the baffle tube. - Page 20 3 Year Comprehensive Pacific Energy will replace or repair any part found to be defective (parts and labor) for three years from the date of pur- chase. This coverage includes electrical components (blowers, speed controls and thermal switches).
- Page 21 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
- Page 22 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
-
Page 23: Label
Label MUR COTE MUR ADJACENT SIDE WALL ADJACENT WALL COTE SIDE 310316-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD. - Page 24 PACIFIC ENERGY FIREPLACE PRODUCTS LTD. 2975 Allenby Rd., Duncan, B.C. V9L 6V8 For technical support, please contact your retailer. Web site: http://www.pacificenergy.net Printed in Canada...