Removing Bezel Blanks - HP ProDesk 405 G1 Microtower Hardware Reference Manual
Hide thumbs
Also See for ProDesk 405 G1 Microtower:
- Specification (51 pages) ,
- Maintenance and service manual (165 pages) ,
- Disassembly instructions manual (16 pages)
Table of Contents
Advertisement
Removing bezel blanks
On some models, there are bezel blanks covering one or more drive bays that need to be removed
before installing a drive. To remove a bezel blank:
1.
Remove the access panel and front bezel.
2.
Remove the bezel blank for the appropriate drive:
●
To remove a 5.25-inch bezel blank, press inward on the two retaining tabs on the side of
the bezel blank that hold the bezel blank in place (1) and rotate the bezel blank back to
remove it (2).
●
To remove a 3.5-inch bezel blank, press inward on the two retaining tabs on the side of the
bezel blank that hold the bezel blank in place (1) and rotate the bezel blank back to remove
it (2).
10
Chapter 2 Hardware upgrades
Advertisement
Table of Contents
