ENGLISH (Original instructions) SPECIFICATIONS Model: DUH507 DUH607 Blade length 500 mm 600 mm Strokes per minute 2,700 min Overall length 872 mm 976 mm (Without battery) Rated voltage D.C. 18 V Net weight 2.7 - 3.0 kg 2.8 - 3.1 kg •...
(dB(A)) Uncertainty K (dB(A)) (dB(A)) DUH507 DUH607 NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and may be used for comparing one tool with another. NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Never use the tool when under the influence of Cordless Hedge Trimmer Safety alcohol, drugs or medication. Warnings Work gloves of stout leather are part of the basic equipment of the tool and must always Keep all parts of the body away from the blade. be worn when working with it.
Page 10
Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.
Tips for maintaining maximum Indicating the remaining battery battery life capacity Charge the battery cartridge before completely Only for battery cartridges with the indicator discharged. Always stop tool operation and ► Fig.2: 1. Indicator lamps 2. Check button charge the battery cartridge when you notice less tool power.
Let the machine and battery(ies) cool down. stopped due to and remove the overload. cause of overload. If no improvement can be found by restoring protection system, then contact your local Makita Service Center. The tool has Turn off the tool, stopped due to and cool down the NOTICE: If the tool stops due to a cause overheat.
Remove the bolts and the shear blades from the The chip receiver gathers discarded leaves and makes tool. Then remove the dust guard, the metal sleeves clean-up afterward much easier. It can be installed on and the flat washer from the shear blades. either side of the tool. ► Fig.7: 1.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the tool Clean the tool by wiping off dust with a dry cloth or one dipped in soapy water and wrung out.
TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Motor does not run. Battery cartridge is not installed. Install the battery cartridge.