Table of Contents
Advertisement
Installing the SCSI Miniport Driver
Device Driver Installation
This section describes the instructions for installing the Windows SCSI Miniport
driver.
System Requirements
Ensure that your system meets these minimum requirements:
Installing or Upgrading a New Driver
The AB466A and AB467A HBAs are plug-and-play devices that are detected by
Windows operating systems. Perform the following steps to add or update the
Windows driver to a previously installed Windows system:
1. Install the HBA as described in
2. Restart or turn on the computer.
3. Browse to the the driver kit on the Smart Setup CD-ROM (or one you
4. Double-click the Smart Component, cp00xxxx.exe.
Note:
Component's version number:
http://h18000.www1.hp.com/storage/saninfrastructure.html.
5. Follow the installation wizard instructions.
6. When the installation completes, you must reboot.
7. Repeat
26
AB466A and AB467A PCI-X Host Bus Adapters for 64-Bit Windows Systems Installation Guide
Installed HBA
StorageWorks Fibre Channel Storage subsystem (interconnect device and
storage device)
downloaded from the website if it is more recent).
Refer to the following web site for the information about this Smart
step 1
through
after installing the driver for the last HBA.
Chapter 2
on page 17.
step 6
for any additional HBAs. Make sure to reboot
Advertisement
Table of Contents
