hit counter code
Sony Xperia M Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Cell Phone
  5. Xperia M dual
  6. Manual

Sony Xperia M Manual

Hide thumbs Also See for Xperia M:
Table of Contents

Advertisement

Quick Links

Download this manual
Repair Movies
- mechanical -
TM
TM
Xperia
M, Xperia
M Dual
C1904, C1905, C2004, C2005
1277-1354 Rev 1
©
Sony Mobile Communications AB – Company Internal

Advertisement

Table of Contents
loading

Related Manuals for Sony Xperia M

Summary of Contents for Sony Xperia M

  • Page 1 Repair Movies - mechanical - Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-1354 Rev 1 © Sony Mobile Communications AB – Company Internal...
  • Page 2 In that case, right-click with the mouse on the document name and select Save Target As to download the repair movie document for off-line viewing. For general information about repair movies, refer to 1220-1333: Generic Repair Manual - mechanical 1277-1354 Rev 1 © Sony Mobile Communications AB – Company Internal 2(4)
  • Page 3 5. ANT Board 6. Front Cover Assy Reassembly 1. Front Cover Assy 2. ANT Board 3. Main PBA 4. Rear Cover Assy 5. Battery 6. Battery Cover Assy 1277-1354 Rev 1 © Sony Mobile Communications AB – Company Internal 3(4)
  • Page 4 Repair Movie Repair Instruction Mechanical/ Revision History Rev. Date Changes / Comments 2013-Aug-09 Initial release 1277-1354 Rev 1 © Sony Mobile Communications AB – Company Internal 4(4)
  • Page 5 Customization - build swap - Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal...

  • Page 6: Table Of Contents

    Customize to Ship ..................6 2.3.2 Build Swap ....................6 Revision History ................7 For general information about Customization and Swap, refer to 1221-5655: Generic Repair Manual – build swap 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 2(7)
  • Page 7 • connect the phone to the USB C Cable • release the ” Volume Down” key When executing an ‘Activation Sc cript’ you will be prompted for the PIN of you r USB Activation Dongle. 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 3(7)

  • Page 8: Customization Workflow

    Customization (swap) stom (swa Customization Workflow 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 4(7)

  • Page 9: Customize Unit

    Press the On/off Key to power on the unit, place unit on the flat desk and wait until system boot up has been completed. Please DO NOT move the unit during starting up until “Select Language” menu is shown on the display! 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 5(7)

  • Page 10: Customize To Ship Or Build Swap

    Refer to the Cross Reference List for the appropriate variant, which should be based on the non- customizable mechanics of the unit. 2.3.2.2 De-Customize Unit Remove any co-branding as described in 1277-1343 Working Instructions – mechanical 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 6(7)

  • Page 11: Revision History

    Customization (swap) stom (swa Revision History Date Changes / Comments 2013-Aug-09 Initial release 1277-1364 Rev 1 © Sony Mobile Communications AB – Company Internal 7(7)
  • Page 12 Part List - mechanical - Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal...
  • Page 13 Part List Mechanical/ CONTENTS Part List ................... 3 Revision History ................10 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 2(10)
  • Page 14 Battery Cover Assy Yellow SS 1274-1137 Battery Cover Assy Black DSDS 1272-1744 Battery Cover Assy Purple DSDS 1276-1389 Battery Cover Assy White DSDS 1272-1745 Camera Connector Mylar Tape 464NIK00103 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 3(10)
  • Page 15 56BNIK00002 Camera Key Camera Key Black 1272-3813 Camera Key White 1272-3816 Coaxial Cable 2831002300A Diffusion Film 468NIK00002 Display 35051009W00 Earspeaker F79624032003 EarSpeaker Adhesive 56BNIK00003 Flash LED Gasket 56DNIK00005 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 4(10)
  • Page 16 1272-3744 Kapton Tape Display FPC 56GNIK00002 Kapton Tape TP connector 56GNIK00000 Label 1272-1354 Light Bar Gasket 56DNIK00011 Light Pipe Sensor 468NIK00001 Link FPC 312NIK24C1F Link FPC Gasket 56DNIK00007 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 5(10)
  • Page 17 56DNIK00006 Loudspeaker F79124032000 Main Camera 5M 475NIK0210A Microphone Mesh 56ANIK00003 Microphone Rubber 455NIK0410A Microphone Rubber 455NIK0110A Rear Cover Rear Cover DSDS Black 1272-3747 Rear Cover SS Black 1272-3745 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 6(10)
  • Page 18 Reflective Sheet 460NIK00000 RF Port Rubber 1272-4132 Rubber Sensor 455NIK0310A Screw M1.4*2.4 500014024Z1 Screw M1.6*4.0 500016040Z1 Screw M1.6*3.0 500016030Z1 SIM Board Adhesive 56BNIK00000 SIM Board SIM Board DSDS 311NIK2602E 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 7(10)
  • Page 19 Speaker Mesh White 1272-3819 Speaker Mesh on Rear Cover 455NIK0810A Speaker Sponge 56DNIK00004 Touch Panel Adhesive 56BNIK00004 Touch Panel Touch Panel Black 35031021Z00 Touch Panel White 35031020Z00 Water Indicator 1221-5956 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 8(10)
  • Page 20 Part List Mechanical/ Designation Part No. Part Location Volume Key Volume Key Black 1272-3810 Volume Key White 1272-3811 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 9(10)
  • Page 21 Rev. Date Changes / Comments 2013-Aug-09 Initial release 2013-Aug-09 Update DSDS info 2013-Sep-25 Update DSDS info and add new part Kapton Tape Display FPC 2013-Nov-26 Update RLC content 1277-1358 Rev 4 © Sony Mobile Communications AB – Company Internal 10(10)
  • Page 22 Troubleshooting Guide - mechanical - Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal...
  • Page 23 1.16.1 Proximity switch malfunctions ..............28 1.17 Real Time Clock ................. 29 1.17.1 Real Time Clock test fails ................. 29 1.18 Total call time ..................30 1.18.1 Total call time fails ..................30 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 2(45)
  • Page 24 1.27.1 Data transfer via System Connector fails ..........41 1.28 Flash LED Defects ................42 1.28.1 Flash LED defects ..................42 1.29 NFC ..................... 44 1.29.1 NFC malfunctions ..................44 Revision History ................45 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 3(45)

  • Page 25: Problem Areas

    3. If damaged – replace Main PBA. Check: Inspect the on/off key (a) and the on/off switch (b). Action: Refer to section 1.2.4 ‘On/Off Key’. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 4(45)

  • Page 26: Keys

    2. If the camera key (a) is damaged – replace the Camera Key. 3. If the camera key switch (b) is damaged – replace the Link FPC and Link FPC Gasket. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 5(45)

  • Page 27: Volume Key

    1. If the volume key (a) or the volume switch (b) is dirty or clogged – clean it. 2. If the Volume Key (a) is damaged – replace the Volume Key. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 6(45)

  • Page 28: On/Off Key

    Inspect the on/off key (a) on the Battery Cover Assy and the on/off switch (b). Action: 1. If the on/off key (a) or the on/off switch (b) is dirty or clogged – clean it. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 7(45)
  • Page 29 3. If the BtB connector or the On/off Key switch of the Link FPC is damaged – replace the Link FPC and Link FPC Gasket. 4. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 8(45)

  • Page 30: Touch Screen

    Inspect the FPC of the Touch Panel. Action: If the FPC or the touch screen is damaged – replace the Touch Panel, Kapton Tape TP connector and Touch Panel Adhesive. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 9(45)
  • Page 31 Action: 1. If the Display or its FPC is damaged – replace the Display, Touch Panel, Touch Panel Adhesive and Kapton Tape TP connector. 2. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 10(45)

  • Page 32: Display

    1. If dirty – clean it. 2. If the Display or its FPC is damaged – replace the Display, Touch Panel, Touch Panel Adhesive and Kapton Tape TP connector. 3. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 11(45)

  • Page 33: Led/Illumination

    Inspect the LED (a) on the ANT Board and the backside of the RGB window (b). Action: 1. If dirty – clean them. 2. If damage - replace the ANT Board. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 12(45)
  • Page 34 2. If dirty or oxidized – clean it. 3. If the connectors or the FPC part of Link FPC is damaged – replace the Link FPC and Link FPC Gasket. 4. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 13(45)

  • Page 35: Speaker

    1. If dirty – clean it. 2. If damaged – replace it Check: Inspect the Speaker Sponge. Action: 1. If dirty – clean it. 2. If damaged – replace it 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 14(45)
  • Page 36 Inspect the BtB connector of the Link FPC to the Main PBA. Action: 1. If not properly connected – disconnect and reconnect it. 2. If dirty or oxidized – clean it. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 15(45)
  • Page 37 Problem Areas: Speaker 3. If the connectors or the FPC part of Link FPC is damaged – replace the Link FPC and Link FPC Gasket. 4. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 16(45)

  • Page 38: Earspeaker

    1. If dirty – clean them. 2. If the Earspeaker or its contact pins are damaged – replace the Earspeaker and the Earspeaker Adhesive. 3. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 17(45)

  • Page 39: Microphone

    (a) on the Front Cover Assy and Microphone (b) on the ANT Board. Action: 1. If clogged – clean them. 2. If Microphone Mesh or the Microphone Rubber (a) is damaged – replace Microphone Mesh and the Microphone Rubber. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 18(45)
  • Page 40 2. If dirty or oxidized – clean it. 3. If the connectors or the FPC part of Link FPC is damaged – replace the Link FPC and Link FPC Gasket. 4. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 19(45)

  • Page 41: Secondary Microphone

    Microphone (b) on the Main PBA. Action: 1. If dirty – clean them. Liquid is not allowed! 2. If the 2 Microphone Rubber is damaged – replace it. 3. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 20(45)

  • Page 42: Vibrator

    2. If dirty or oxidized – clean it. 3. If the connectors or the FPC part of Link FPC is damaged – replace the Link FPC and Link FPC Gasket. 4. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 21(45)

  • Page 43: Camera

    1. If the Camera or its BtB connector is damaged – replace the Main Camera 5M, the Camera Connector Mylar Tape and the Camera Gasket. 2. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 22(45)

  • Page 44: Bluetooth And Wlan

    Rear Cover and the contact pins on the Main PBA. Action: 1. If dirty – clean the pad and pins. 2. If the contact pad is damaged – replace the Rear Cover. 3. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 23(45)

  • Page 45: Gps

    Main PBA. Action: 1. If dirty – clean the pads and pins. 2. If the contact pads are damaged – replace the Rear Cover. 3. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 24(45)

  • Page 46: Compass

    Troubleshooting Guide (mech) Problem Areas 1.13 Compass 1.13.1 Compass fails Action: Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 25(45)

  • Page 47: Accelerometer

    – replace the SIM Board. 4. Replace the Main PBA. G-sensor Calibration should be performed after replacing SIM Board. For G-sensor Calibration, refer to 1277-8589 Trouble Shooting Application. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 26(45)

  • Page 48: Light Sensor

    Main PBA. Action: 1. If dirty – clean them. 2. If the rubber is damaged – replace the Rubber Sensor and Light Pipe Sensor. 3. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 27(45)

  • Page 49: Proximity Switch

    Main PBA. Action: 1. If dirty – clean them. 2. If the rubber is damaged – replace the Rubber Sensor and Light Pipe Sensor. 3. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 28(45)

  • Page 50: Real Time Clock

    Troubleshooting Guide (mech) Problem Areas 1.17 Real Time Clock 1.17.1 Real Time Clock test fails Action: Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 29(45)

  • Page 51: Total Call Time

    Troubleshooting Guide (mech) Problem Areas 1.18 Total call time 1.18.1 Total call time fails Action: Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 30(45)

  • Page 52: External Memory

    – replace the SIM Board. 4. Replace the Main PBA. G-sensor Calibration should be performed after replacing SIM Board. For G-sensor Calibration, refer to 1277-8589 Trouble Shooting Application. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 31(45)

  • Page 53: Security

    Troubleshooting Guide (mech) Problem Areas 1.20 Security 1.20.1 Security fails Action: Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 32(45)

  • Page 54: Fm Radio

    If dirty or oxidized – clean it. Check: Inspect the audio jack on the Main PBA. Action: 1. If dirty or oxidized – clean it. 2. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 33(45)

  • Page 55: Verify Certificates

    Troubleshooting Guide (mech) Problem Areas 1.22 Verify Certificates 1.22.1 Verify certificates fails Action: Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 34(45)

  • Page 56: Network & Signal

    Sub PBA. Action: 1. If dirty – clean the pads and pins. 2. If the contact pads are damaged – replace the Rear Cover. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 35(45)
  • Page 57 2. If dirty or oxidized – clean it. 3. If the Coaxial Cable or either of its two connectors is damaged – replace the Coaxial Cable. 4. Replace ANT Board 5. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 36(45)

  • Page 58: Sim

    – replace the SIM Board. 4. Replace the Main PBA. G-sensor Calibration should be performed after replacing SIM Board. For G-sensor Calibration, refer to 1277-8589 Trouble Shooting Application. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 37(45)

  • Page 59: Incorrect Sim Indicated

    – replace the SIM Board. 4. Replace the Main PBA. G-sensor Calibration should be performed after replacing SIM Board. For G-sensor Calibration, refer to 1277-8589 Trouble Shooting Application. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 38(45)

  • Page 60: Charging

    3. If the contact pins are damaged – replace the Main PBA. Check: Inspect the USB connector. Action: 1. If dirty or oxidized – clean the connector. 2. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 39(45)

  • Page 61: Handsfree By Wire

    If dirty or oxidized – clean it. Check: Inspect the audio jack on the Main PBA. Action: 1. If dirty or oxidized – clean it. 2. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 40(45)

  • Page 62: Data Communication

    If dirty or oxidized – clean the connector. Check: Inspect the USB connector. Action: 1. If dirty or oxidized – clean the connector. 2. Replace the Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 41(45)

  • Page 63: Flash Led Defects

    Check the connection of the BtB connector from SIM Board to the Main PBA. Action: 1. If not properly connected – disconnected and reconnected it. 2. If dirty or oxidized – clean it. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 42(45)
  • Page 64 – replace the SIM Board. 4. Replace the Main PBA. G-sensor Calibration should be performed after replacing SIM Board. For G-sensor Calibration, refer to 1277-8589 Trouble Shooting Application. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 43(45)

  • Page 65: Nfc

    1. If dirty or oxidized – clean the pads and pins. 2. If the contact pads are damaged – replace the Battery Cover Assy 3. Replace Main PBA. 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 44(45)

  • Page 66: Revision History

    Troubleshooting Guide (mech) Revision History Rev. Date Changes / Comments 2013-Aug-09 Initial release 2013-Sep-12 Update G-Sensor Calibration reference document 1277-1356 Rev 2 © Sony Mobile Communications AB – Company Internal 45(45)
  • Page 67 Test Instructions - mechanical - Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal...
  • Page 68 Camera ............. Error! Bookmark not defined. 2.3.4 Charging via USB and Easy Charger (Charger or Computer) ....20 2.3.5 Data Communication test ................. 21 2.3.6 Network Test ....................22 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 2(25)
  • Page 69 Test Instructions (mech) Revision History ................22 For general information about test procedures, refer to 1220-1333: Generic Repair Manual - mechanical 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 3(25)

  • Page 70: Pre-Test Preparations

    Rear Cover. If affected (red color) - handle the phone according to the local directives. If not affected by liquid, proceed to the ‘Pre-Test Preparation’ below. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 4(25)

  • Page 71: Test Enablers

    10. On/Off Key 11. Volume up/down Key 12. Auto Focus / Camera Key 13 14 Back: 13. Camera 14. Flash LED & Secondary Microphone 15. NFC 16. Speaker 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 5(25)

  • Page 72: Software

    (see “Service Types” and “Aspects of large files”) In Swap flow, when change a phone from Customer A to Customer B, always use the service Customization script. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 6(25)

  • Page 73: Tests

    For more information, refer to 1220-1333: Generic Repair Manu ual - mechanical The following pictures will show w a simplified basic phone for a general vis sualization of the service tests. 1277-1359 Rev 2 © Sony Mobile Communications A B – Company Internal 7(25)

  • Page 74: Service Tests

    Make sure that there are no missing segments and that the colors and contrast are OK. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 8(25)

  • Page 75: Led

    The Ambient Light Sensor test states a value. The value should increase when the window gets more light and decrease when the window gets less light. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 9(25)

  • Page 76: Speaker

    Step 1: Touch the screen to start recording approximately ten seconds. Speak into the microphone during the ‘Microphone Recording’ phase. Step 2: Touch the screen to stop recording. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 10(25)

  • Page 77: Secondary Microphone

    Check the quality by listening to the recording from the Speaker during the ‘Playing recorded sound’ phase at maximum volume. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 11(25)

  • Page 78: Vibrator

    Do the same thing at an object on a different distance to secure that autofocus works! Photos is taken but not saved during this test! Press Back key to return to Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 12(25)

  • Page 79: Bluetooth

    Step 5: Enter a web address (e.g. Google.com) Step 6: When connection succeeded, it shows “Test Complete”. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 13(25)

  • Page 80: Gps

    Press the Back key to return to the Service Test Menu. 2.2.18 Accelerometer The accelerometer test displays the actual position of the phone as a 3D coordinate X: Y: Z. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 14(25)

  • Page 81: Proximity Switch

    During the actual test the text ‘Real time clock test’ is displayed, and then followed by a message stating whether the test was OK or not. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 15(25)

  • Page 82: Total Call Time

    The DRM keys are shown in the display. There may be different content shown based on different market software versions. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 16(25)

  • Page 83: Fm Radio

    Press the Back key to return to the Service Test Menu. 2.2.26 Flip slider counter Not applicable, do not use. Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 17(25)

  • Page 84: Verify Certificates

    Micro USB cable should be plugged in the phone with PC or charger before the start of this test! USB connecting status should shows “Connected”; Press the Back key to return to the Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 18(25)

  • Page 85: Flash Led

    Step 3: When Tag is identified, a sound will be made and an OK message will be displayed. Press Back key two times to return to Service Test Menu. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 19(25)

  • Page 86: Manual Tests

    Remove the USB cable from the USB connector and verify that the notification LED and Battery icon no longer indicates charging. b li 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 20(25)

  • Page 87: Data Communication Test

    • Connect a USB cable from a computer to the started phone. • Verify that Data Communication works by transferring a file from Computer to phone • Erase the file 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 21(25)

  • Page 88: Network Test

    More… Mobile Networks Select SIM card SIM1 Network mode WCDMA only To verify the radio functions (WCDMA) of the phone, follow the ‘2.4.4 Procedure (GSM & UMTS)’ above. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 22(25)
  • Page 89 More… Mobile Networks Select SIM card SIM1 Network mode WCDMA only To verify the radio functions (WCDMA) of the phone, follow the ‘2.4.3 Procedure (GSM & UMTS)’ above. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 23(25)
  • Page 90 Step 6: End the call and check that the elapsed time is displayed and that the termination is done properly. 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 24(25)
  • Page 91 Test Instructions (mech) Revision History Rev. Date Changes / Comments 2013-Aug-09 Initial release 2013-Sep-11 Update chapter 2.2.18 Accelerometer with reference document 1277-8589 1277-1359 Rev 2 © Sony Mobile Communications AB – Company Internal 25(25)
  • Page 92 Go/No Go Test Xperia M, Xperia M Dual C1904, C1905, C2004, C2005 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal...
  • Page 93 1.3.1 Loss Values – Antenna Coupler ..............6 1.3.2 Loss Values – Direct Line ................7 Revision History ................8 This product is ONLY implemented in SERP II 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 2(8)

  • Page 94: Go/No Go Testing

    Put the grid positioning holder with its reference point in position F12 and place the phone as shown in the adjacent picture. G H I O P Q R 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 3(8)

  • Page 95: Direct Line

    Connect the RF Probe as shown in the adjacent picture. To get access to the RF connector on the PBA, refer to 1277-1343: C1904, C1905, C2004, C2005 Mechanical Working Instructions, Chapter 3.1! 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 4(8)
  • Page 96 1220-1336: Generic Repair Manual – electrical, together with the ‘Attenuation Factors’ below! This phone is available as 4 versions, C1904, C1905, C2004 and C2005 including the following bands: C1905, C2005: GSM-850/900/1800/1900 WCDMA-900/2100 C1904, C2004: GSM-850/900/1800/1900 WCDMA-850/1700/1900/2100 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 5(8)

  • Page 97: Attenuation Factors

    WCDMA 1700 12.50 15.07 High 13.25 18.62 14.75 17.19 WCDMA 1900 14.75 13.59 High 12.75 12.36 13.00 12.39 12.25 13.01 12.25 12.91 WCDMA 2100 High 12.00 15.49 11.50 15.25 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 6(8)

  • Page 98: Loss Values - Direct Line

    Go/NoGo Testing: Attenuation Factors 1.3.2 Loss Values – Direct Line Attenuation Band Channel GSM 850 GSM 900 GSM 1800 GSM 1900 WCDMA 850 WCDMA 900 WCDMA 1700 WCDMA 1900 WCDMA 2100 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 7(8)

  • Page 99: Revision History

    Test and Calibration Repair Instruction Revision History Rev. Date Changes / Comments 2013-Jul-29 Initial release 2013-Sep-25 Added C2004 and C2005 2013-Okt-27 Moved to SL2 1277-2384 Rev 3 ” Sony Mobile Communications AB – Company Internal 8(8)

This manual is also suitable for:

Xperia m dualC1904C1905C2004C2005

Table of Contents