Table of Contents
Advertisement
Figure 34. Installing the expansion card riser 2
Next steps
1.
Install the expansion card riser
2. Follow the procedure listed in
Removing an expansion cards
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Removing the expansion card riser 1
Steps
1. Using a Phillips 2 screwdriver, remove the screw that secures the expansion card to the riser.
2. Holding the expansion card by its edges, remove it from the riser slots.
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
1.
After working inside your
Safety
instructions.
Before working inside your
and
Remove the expansion card riser
system.
system.
2.
Installing and removing system components
65
Advertisement
Table of Contents
