Table of Contents
Advertisement
Power connector
Description
Power connector (includes cable)
Before removing the power connector cable:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the power connector cable:
1.
Turn the computer upright with the right side toward you.
2.
Disconnect the power connector cable (1) from the system board.
3.
Lift the power connector (2) from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
ENWW
Battery on page
42).
Hard drive on page
43)
Optical drive on page
Keyboard on page
54)
Top cover on page
57)
46)
Component replacement procedures
Spare part number
616496-001
67
- Quick Links:
- Computer Major Components
Hide quick links:
Advertisement
Table of Contents
