hit counter code
Dell Chromebook 3110 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Chromebook 3110
  6. Service manual

Dell Chromebook 3110 Service Manual

Hide thumbs Also See for Chromebook 3110:
Table of Contents

Advertisement

Quick Links

Download this manual
Chromebook 3110
Service Manual
Regulatory Model: P29T
Regulatory Type: P29T002/P29T003
June 2022
Rev. A01

Advertisement

Table of Contents
loading

Related Manuals for Dell Chromebook 3110

Summary of Contents for Dell Chromebook 3110

  • Page 1 Chromebook 3110 Service Manual Regulatory Model: P29T Regulatory Type: P29T002/P29T003 June 2022 Rev. A01...
  • Page 2 A WARNING indicates a potential for property damage, personal injury, or death. © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

  • Page 3: Table Of Contents

    Transporting sensitive components.......................... 8 After working inside your computer..........................8 Chapter 2: Removing and installing components................9 Recommended tools................................9 Screw list....................................9 Major components of Chromebook 3110 ........................10 Base cover................................... 12 Removing the base cover............................12 Installing the base cover.............................14 SIM card....................................16 Removing the SIM card..............................
  • Page 4 Chapter 3: Troubleshooting......................65 Handling swollen Lithium-ion batteries........................65 Recovering the operating system..........................65 WiFi power cycle................................66 Drain residual flea power (perform hard reset)......................66 Chrome OS Pre-Boot Diagnostics ......................... 66 Chapter 4: Getting help and contacting Dell................68 Contents...

  • Page 5: Chapter 1: Working Inside Your Computer

    You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that is shipped with the product or at www.dell.com/regulatory_compliance.

  • Page 6: Safety Precautions

    ESD protection is an increasing concern. Due to the increased density of semiconductors used in recent Dell products, the sensitivity to static damage is now higher than in previous Dell products. For this reason, some previously approved methods of handling parts are no longer applicable.

  • Page 7: Esd Field Service Kit

    It is recommended that all field service technicians use the traditional wired ESD grounding wrist strap and protective anti-static mat at all times when servicing Dell products. In addition, it is critical that technicians keep sensitive parts separate from all insulator parts while performing service and that they use anti-static bags for transporting sensitive components.

  • Page 8: Transporting Sensitive Components

    Transporting sensitive components When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place these parts in anti-static bags for safe transport. After working inside your computer About this task NOTE: Leaving stray or loose screws inside your computer may severely damage your computer.

  • Page 9: Chapter 2: Removing And Installing Components

    Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #1 ● Torx 5 screwdriver ●...

  • Page 10: Major Components Of Chromebook 3110

    System board (for systems M2x4 without USB Type-A port on the right side) Display Bezel M2.5x3.8 Display panel M2x3 Display hinges M2x3 M2.5x2.5 Major components of Chromebook 3110 The following image shows the major components of Chromebook 3110 . Removing and installing components...
  • Page 11 1. Base cover 2. System board 3. Battery 4. Speakers 5. Computer chassis 6. Display assembly Removing and installing components...

  • Page 12: Base Cover

    The following images indicate the location of the base cover and provide a visual representation of the removal procedure. NOTE: For Chromebook 3110 systems shipped with WWAN, the base cover is secured using Torx 5 (not Phillips #0) screws. Removing and installing components...
  • Page 13 Steps 1. Loosen the nine captive screws that secure the base cover to the palm-rest assembly. 2. Using a plastic scribe, pry the base cover from the U-shaped indents at the top and continue working on the sides to open the base cover.

  • Page 14: Installing The Base Cover

    The following images indicate the location of the base cover and provide a visual representation of the installation procedure. NOTE: For Chromebook 3110 systems shipped with WWAN, the base cover is secured using Torx 5 (not Phillips #0) screws. Removing and installing components...
  • Page 15 Removing and installing components...

  • Page 16: Sim Card

    Steps 1. Connect the battery cable to the connector on the system board. 2. Place the base cover on top of the palm-rest assembly. 3. Align the screw holes on the base cover with the screw holes on the palm-rest assembly, and snap the base cover latches into place.

  • Page 17: Installing The Sim Card

    Installing the SIM card Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: The following steps are applicable only for 4G LTE enabled systems. The following image indicates the location of the SIM card and provides a visual representation of the installation procedure. Steps 1.

  • Page 18: Wwan Card

    WWAN card Removing the WWAN card Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: The following steps are applicable only for systems that are shipped with a WWAN card. The following image indicates the location of the WWAN card and provides a visual representation of the removal procedure.

  • Page 19: Installing The Wwan Card

    5. Replace the screw (M2x3) to secure the WWAN card and WWAN-card bracket to the system board. NOTE: For instructions on how to find your computer's International Mobile Station Equipment Identity (IMEI) number, see the knowledge base article 000143678 at https://www.dell.com/support/. Next steps 1. Install the base cover.

  • Page 20: Battery

    ● If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for assistance. See www.dell.com/contactdell.

  • Page 21: Installing The 3-Cell Battery

    Steps 1. Unroute the battery cable from the routing channels between the system board and 3-cell battery. 2. Remove the three screws (M2x4) that secure the 3-cell battery to the palm-rest assembly. 3. Lift the 3-cell battery off the palm-rest assembly. Installing the 3-cell battery Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure.
  • Page 22 Steps 1. Align and place the 3-cell battery in the slot on the palm-rest assembly. 2. Replace the three screws (M2x4) to secure the 3-cell battery to the palm-rest assembly. 3. Route the battery cable through the routing channels between the system board and 3-cell battery. Next steps 1.

  • Page 23: Battery Cable

    Battery cable Removing the battery cable Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery About this task The following image indicates the location of the battery cable and provides a visual representation of the removal procedure. Steps Disconnect the battery cable from the connector on the battery.

  • Page 24: Keyboard

    Steps Connect the battery cable to the connector on the battery. Next steps 1. Install the 3-cell battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Keyboard Removing the keyboard Prerequisites 1. Follow the procedure in Before working inside your computer.
  • Page 25 Removing and installing components...

  • Page 26: Installing The Keyboard

    Steps 1. Unroute the battery cable from the routing channels between the system board and 3-cell battery. 2. Disconnect the keyboard Flexible Printed Circuits (FPC) cable from the connector on the system board. 3. Place the system on a flat surface with the keyboard facing up. Open the system to 180 degrees. 4.

  • Page 27: Display Assembly

    Steps 1. Carefully insert the keyboard Flexible Printed Circuits (FPC) cable through the gap on the palm-rest. 2. Align and place the keyboard on the palm-rest assembly. 3. Gently press the keyboard and snap it into place. 4. Close the display completely and turn the system over. 5.
  • Page 28 Removing and installing components...

  • Page 29: Installing The Display Assembly

    Steps 1. Remove the screw (M2x3) that secures the WLAN card bracket to the WLAN card module on the system board. 2. Lift and remove the WLAN card bracket from the WLAN card module that secures the two antenna cables. 3.
  • Page 30 Removing and installing components...
  • Page 31 6. Adhere the conductive tape to secure the display cable to the display hinges. NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in place.

  • Page 32: System Board

    3. Follow the procedure in After working inside your computer. System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the WWAN card for systems enabled with 4G LTE. NOTE: For systems shipped with WWAN card, the SIM card slot is located at the bottom-left side of the system board.
  • Page 33 Removing and installing components...
  • Page 34 Steps 1. Unroute the battery cable from the routing channels between the system board and 3-cell battery. 2. Remove the screw (M2x3) that secures the WLAN card bracket to the WLAN card module on the system board. 3. Lift and remove the WLAN card bracket from the WLAN card module that secures the two antenna cables. 4.

  • Page 35: Installing The System Board

    When removing the system board, carefully lift the system board from the left side to remove it from the palm-rest assembly. Lifting the system board from another side may damage components connected to the palm-rest. Chromebook 3110 With a USB-A Port on the Right Side: Chromebook 3110 Without a USB-A Port on the Right Side:...
  • Page 36 1. WLAN card connector 2. Display cable connector 3. Speaker cable connector 4. Battery cable connector 5. Keyboard cable connector 6. Touchpad cable connector 7. WWAN card connector 8. SIM card connector The following images indicate the location of the system board and provide a visual representation of the installation procedure. NOTE: If the CPU thermal pad on the palm-rest (underneath the system board) gets detached, adhere it back onto the palm-rest.
  • Page 37 Removing and installing components...
  • Page 38 When removing the system board, carefully lift the system board from the left side to remove it from the palm-rest assembly. Lifting the system board from another side may damage components connected to the palm-rest. Chromebook 3110 With a USB-A Port on the Right Side: Chromebook 3110 Without a USB-A Port on the Right Side:...
  • Page 39 10. Adhere the conductive tape to secure the display cable on the display hinges. NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in place.

  • Page 40: Speakers

    Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery. About this task The following image indicates the location of the speakers and provides a visual representation of the removal procedure. Steps 1.

  • Page 41: Installing The Speakers

    NOTE: To remove the speakers, the piece of transparent tape that secures the speaker cable in place must be peeled back. 2. Disconnect the speaker cable from the connector on the system board. 3. Peel the three pieces of adhesive tape that secure the speaker cable in place. 4.
  • Page 42 Steps 1. Using the alignment posts, place the speakers into the slots on the palm-rest assembly. 2. Route the speaker cable through the routing channels in the palm-res assembly. NOTE: The speaker cables must be routed through the routing channels at the bottom of the palm-rest and underneath the tape with an arrow to avoid damaging the speaker cables when installing the base cover.

  • Page 43: Display Bezel

    3. Affix the three pieces of adhesive tape to secure the speaker cable in place. 4. Connect the speaker cable to the connector on the system board. 5. Affix the clear tape to secure the speaker cable in place. Next steps 1.
  • Page 44 Removing and installing components...
  • Page 45 Steps 1. Use a plastic scribe to peel the stickers that cover the display bezel screws. NOTE: A new set of stickers is included with replacement display bezel. When replacing the new display bezel, adhere the new stickers over the screws once the screws have been secured. NOTE: A blade or a plastic scribe can be used to peel the display bezel stickers.
  • Page 46 4. Use a plastic scribe to pry open the outside edge of the bottom side of the display bezel. NOTE: Carefully pry the display bezel as peeling the adhesive on display bezel may damage the display panel. 5. Use a plastic scribe to pry open both hinge caps of the display bezel. 6.
  • Page 47 7. Carefully peel off and remove the display bezel from the display assembly. Removing and installing components...

  • Page 48: Installing The Display Bezel

    Installing the display bezel Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the display bezel and provide a visual representation of the installation procedure. Removing and installing components...
  • Page 49 Removing and installing components...

  • Page 50: Display Panel

    Steps 1. Align and place the display bezel on the display assembly. 2. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display assembly. 3. Press both the hinge caps of the display bezel until it clicks into place. 4.
  • Page 51 4. Remove the display assembly. 5. Remove the display bezel. About this task The following images indicate the location of the display panel and provide a visual representation of the removal procedure. Removing and installing components...

  • Page 52: Installing The Display Panel

    Steps 1. Remove the four screws (M2x3) that secure the display panel to the display assembly. 2. Carefully flip the display panel to access the display cable. 3. Peel back the conductive tape that secures the display cable connector. 4. Peel back the clear tape on the display cable connector. 5.
  • Page 53 Removing and installing components...
  • Page 54 3. Adhere the clear tape on the display cable connector. NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in place.

  • Page 55: Front-Facing Camera

    Front-facing camera Removing the front-facing camera Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the WWAN card for systems enabled with 4G LTE. 4. Remove the display assembly. 5. Remove the display bezel.

  • Page 56: Display Hinges

    Steps 1. Align and place the camera module into the slot on the display assembly. 2. Gently press the camera module until it clicks into place. 3. Adhere the foil tape to secure the camera module. 4. Connect the camera cable to the connector on the camera module. Next steps 1.

  • Page 57: Installing The Display Hinges

    Steps 1. Peel back the conductive tape from the left display hinge that secures the display cable in place. 2. Peel back the four pieces of aluminum foil that secure the display hinges. 3. Remove the two screws (M2x3) and the four screws (M2.5x2.5) that secure the display hinges to the display back-cover. 4.
  • Page 58 4. Adhere the conductive tape on the left display hinge to secure the display cable in place. NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in place.

  • Page 59: Display Cable

    Display cable Removing the display cable Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the WWAN card for systems enabled with 4G LTE. 4. Remove the display assembly. 5. Remove the display bezel.

  • Page 60: Installing The Display Cable

    5. Adhere the conductive tape on the left display hinge to secure the display cable in place. NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in place.

  • Page 61: Display Back-Cover And Antenna Assembly

    3. Install the display assembly. 4. Install the WWAN card for systems enabled with 4G LTE. 5. Install the base cover. 6. Follow the procedure in After working inside your computer. Display back-cover and antenna assembly Removing the display back-cover and antenna assembly Prerequisites 1.

  • Page 62: Installing The Display Back-Cover And Antenna Assembly

    Installing the display back-cover and antenna assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the display back-cover and antenna assembly. Steps Place the display back-cover and antenna assembly on a flat surface and perform the postrequisites to install the display back-cover and antenna assembly.

  • Page 63: Installing The Palm-Rest Assembly

    3. Remove the WWAN card for systems enabled with 4G LTE. 4. Remove the 3-cell battery. 5. Remove the keyboard. 6. Remove the display assembly. 7. Remove the system board. 8. Remove the speakers. About this task NOTE: The palm-rest assembly cannot be further disassembled once all of the pre-removal parts procedures are completed.
  • Page 64 Steps Place the palm-rest assembly on a flat surface and perform the postrequisites to install the palm-rest assembly. Next steps 1. Install the speakers. 2. Install the system board. 3. Install the display assembly. 4. Install the keyboard. 5. Install the 3-cell battery.

  • Page 65: Chapter 3: Troubleshooting

    ● Using a non-Dell or incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell that is designed to work with your Dell computer. Do not use a battery from other computers with your computer.

  • Page 66: Wifi Power Cycle

    Chrome OS Pre-Boot Diagnostics The Chromebook 3110 / 3110 2-in-1 supports a pre-boot diagnostic feature that test the memory and/or storage of the Chromebook if it fails to boot into the operating system. Press and hold <Esc> + <Refresh> + <Power> to access the Recovery Process and select Launch diagnostics.
  • Page 67 Troubleshooting...

  • Page 68: Chapter 4: Getting Help And Contacting Dell

    Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 2. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com Tips Online help for operating system...

This manual is also suitable for:

P29tP29t002P29t003

Table of Contents