Advertisement
Quick Links
Dimensional drawings:
Wall mounting installation:
1
C
B
Step 1. With the screws properly fastened, drill one of the holes A, B or C (fig. 1). If you choose hole A or B
the drill size must be 12 Ø and place the glands. If you choose hole C you can drill pattern of the
hole. Follow the same step for the other side of the device.
Step 2. Unfasten the 2 screws (fig. 2) and remove the front cover.
Step 3. Drill the 2 holes (fig. 3) and use the mounting accessories to mount the device.
Step 4. Install the cables (and the glands if needed) and perform the electrical connections. (NOTE: Use
1 power input only, either 230 VAC or 24 VDC.)
Step 5. Reinstall the removed parts of step 2 and power on the device.
Installation on a DIN-rail:
1
In case you want to install the device without the including box:
Step 1. Pull the mounting clips to open and mount the device on the DIN rail.
Step 2. Install the cables and perform the electrical connections.
(NOTE: Use 1 power input only, either 230 VAC or 24 VDC.) Power on the device.
Honeywell Life Safety AS, Postboks 263, 1372 Asker
2
A
Wireless
I/O Unit T2
70mm
3
2
60mm
4
NC
NO
NC C
NO
IN2
IN1
http://www.hls-nordic.com
GB
NC
NO
NC C
NO
IN2
IN1
Advertisement
Related Manuals for Honeywell T2
Summary of Contents for Honeywell T2
- Page 1 Step 1. Pull the mounting clips to open and mount the device on the DIN rail. Step 2. Install the cables and perform the electrical connections. (NOTE: Use 1 power input only, either 230 VAC or 24 VDC.) Power on the device. Honeywell Life Safety AS, Postboks 263, 1372 Asker http://www.hls-nordic.com...
- Page 2 Input 2 (IN2): Not used. NOTE: The device's functionality is fully dependent to the Control Software (Honeywell Tela). All event reports and emergency lighting functions are controlled by the software. Ensure that the control equipment (PC) and the software are continuously up and running.
- Page 3 At the end of their useful life the packaging and product should be disposed of via a suitable recycling centre. Do not dispose of with your normal household waste. Do not burn. Honeywell Life Safety AS, Postboks 263, 1372 Asker http://www.hls-nordic.com...