Advertisement
Quick Links
General features:
DSE3‐23 HW and DSE3‐23 HQ are devices designed for acoustic and optical notice in fire alarm systems.
All materials used to manufacture it comply with fire system requirements.
The alarm device has to be installed by qualified personnel only, respecting all installation standards such as recommended
distances and height in order to get the maximum efficiency.
Coverage volume (wall) – CUBE light lens:
Coverage volume (wall) – WIDE light lens:
Category with WIDE lens or CUBE lens:
Nominal Voltage supply
Operating Voltage range
Max Current consumption
Max Power consumption
Max current for sound
Flash ‐ Strobo frequency
Main sound frequency (average)
Main sound pattern
Max level SPL @1 m
Available Patterns
Available alarm timings
Operating temperature
Timing
Command from the control panel
Enclosure protection degree
Size (HxLxW)
Weight
Standards
DSE3‐23 HW, DSE3‐23 HQ
Optical and acoustic fire alarm device for indoor installation
S-287.1-DSE-ENG
DSE3-23 SERIES
Optical and acoustic fire alarm device
TECHNICAL DATA
7 x 11 x 10 m (Height, Width, Distance)
4 x 18 x 7 m (Height, Width, Distance)
O (see coverage here above)
24Vdc
20Vdc ‐ 30Vdc
130mA @Vdc=24V (DIP1=OFF 110mA, DIP1=ON 130mA)
2.6W
20mA +/‐5mA
0.6Hz or 1.0Hz
Sound 1 850Hz
Sound 1 Decay from 500Hz to 1200Hz period 1,7s
See Diagram 1
6 available patterns: 2 modulated, 2 pulsed, 1 bitonal,1 continuous
4 available timings: Infinite, 3 minutes, 8 minutes, 15 minutes
From ‐10 °C to +55°C
Programmable (see chart)
Polarity inversion
IP31C (Type A, for indoor use)
155x100x53mm
250 gr
EN54‐3:2001 + A1:2002 + A2:2006,
EN54‐23:2010
Rev. A.1 10/2017
Advertisement
Related Manuals for Honeywell NOTIFIER DSE3-23 Series
Summary of Contents for Honeywell NOTIFIER DSE3-23 Series
- Page 1 S-287.1-DSE-ENG Rev. A.1 10/2017 DSE3-23 SERIES Optical and acoustic fire alarm device DSE3‐23 HW, DSE3‐23 HQ Optical and acoustic fire alarm device for indoor installation General features: DSE3‐23 HW and DSE3‐23 HQ are devices designed for acoustic and optical notice in fire alarm systems. All materials used to manufacture it comply with fire system requirements. The alarm device has to be installed by qualified personnel only, respecting all installation standards such as recommended distances and height in order to get the maximum efficiency. TECHNICAL DATA Coverage volume (wall) – CUBE light lens: 7 x 11 x 10 m (Height, Width, Distance) Coverage volume (wall) – WIDE light lens: 4 x 18 x 7 m (Height, Width, Distance) Category with WIDE lens or CUBE lens: O (see coverage here above) Nominal Voltage supply 24Vdc Operating Voltage range 20Vdc ‐ 30Vdc Max Current consumption 130mA @Vdc=24V (DIP1=OFF 110mA, DIP1=ON 130mA) Max Power consumption 2.6W Max current for sound 20mA +/‐5mA Flash ‐ Strobo frequency 0.6Hz or 1.0Hz Main sound frequency (average) Sound 1 850Hz ...
-
Page 2: Installation
Installation: 1. Insert the head of a screwdriver in the slot as shown in Picture 2 and then press gently to lift the cover up a bit; 2. Take off the cover from the tracks; 3. Hang the sounder on the wall through the 4 fixing holes located on the sounder base (see Pict. 1) and using 4 pcs. of 5‐ mm wall plugs; 4. In case of system with external pipes, use an adapter to connect all cables; 5. Close the siren and fix the cover with the screw provided. Fixing Fix the cover with the Holes screw Insert the screwdriver here to open the sounder Pict. 2 Pict. 1 ... - Page 3 DSE3‐23 HQ The device is classified as O. It is designed to cover a maximum volume with side A = 7 m, side B = 10 m, side C = 11 m (See Pict. 6). It can be installed on a wall at an altitude of 7 m or on a ceiling at h = 10 m maximum. For wall installation, the device must be installed with the long side perpendicular to the floor and the strobe flashing unit looking downwards. Maximum installation height is 7 m, the illumination coverage will be 5,5 m on the right, 5,5 m on the left and 10 m on front. For ceiling installation, the device must be installed with the long side perpendicular to the wall and the strobe flashing unit looking towards the space to be illuminated. Consider that the wall on the side without flash will be not illuminated. Maximum installation height is 10 m; the illumination coverage will be 7 m at the front, 5,5 m on the right and 5,5 m on the left. Pict. 6bis: mount the long side of the device perpendicular with respect the wall of the room ...
-
Page 4: Dip Switch
Sounds chart: Terminal DIP 2 Sound Priority Modulation Modulation limits (Hz) S1 (1,2 and 3,4) OFF Sound 1 1 DIN (continuous and decreasing) 500 – 1.200 S2 (5 and 6) OFF Sound 2 2 NFS32 (continuous and alternated) 440 – 554 S3 (8 and 9) OFF Sound 3 3 ISO8021 (fixed tone with pauses) 520 S1(1,2 and 3,4) ON Sound 4 1 BS modified (fixed tones alternated) 520– 940 S2 (5 and 6) ON Sound 5 2 NEN2575 (increasing with pause) 500 – 1.200 S3 (8 and 9) ON Sound 6 ... -
Page 5: Control Panel
CHART 3: terminals connection TERMINAL Connection S1 (1,2 and 3,4) trigger for: sound 1 – sound 4 S2 (5 and 6) trigger for: sound 2 – sound 5 SYNC (7) Devices synchronism: panels and DSE3‐23 sirens. Connect to the other SYNC or B terminals S3 (8 and 9) trigger for: sound 3 – sound 6 CHART 2: DIP 3 – DIP 4, selection of alarm sound duration DIP3 DIP4 Acoustic alarm duration OFF OFF INFINITE (DEFAULT, COMPLYING TO EN54‐3) ON OFF 3 MINUTES (NOT COMPLYING TO EN54‐3) OFF ON 8 MINUTES (NOT COMPLYING TO EN54‐3) ON ON 15 MINUTES (NOT COMPLYING TO EN54‐3) VOLUME and ABSORBED CURRENT adjustment: Rotate trimmer P1 to adjust acoustic power Pict. 7: connectors/terminals/trimmer ... - Page 6 081/7879159 - E-mail: notifier.napoli@notifier.it - 70125 Bari - Via Della Costituente, 29 - Tel.: 080/6180700 - Fax: 080/5648114 - E-mail: notifier.bari@notifier.it - 95126 Catania - Viale Alcide De Gasperi, 187 - Tel.: 095/2279511 - Fax: 095/7120753 - E-mail: notifier.catania@notifier.it Società Unipersonale soggetta ad Attività di Direzione e Coordinamento da parte di Honeywell International Inc. ...