PowerLite 822p/83c ® Quick Setup Unpack the projector You should have the following items: Projector Power cord Remote control and batteries Computer cable User’s Guide Password protect CD-ROM sticker...
Connect your video source Connect the projector to a computer or video source using any of the available connections shown below. • Check the connectors on your video equipment. If more than one connection is available, choose the one that provides the best quality.
Choose a location The projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear or overhead position, you’ll need to choose the correct projection option, identified below, from the Extended menu. See the User’s Guide on your CD-ROM for instructions.
Power light stays green. Start your video or presentation. If you have connected more than one video source, use the Source Search button on the projector or remote control to select the one you want to watch. I f your image does not appear on the screen, see the NOTE Troubleshooting section for help.
Install your User’s Guide and register your projector Insert the PowerLite Projector CD-ROM in your drive. If the installer doesn’t open automatically, double-click the Epson CD-ROM icon, then double-click the Epson installer icon. Choose your projector, then follow the instructions on the screen to register.
Select VGA Display or Color LCD, click Arrangement or Arrange, and make sure Mirror Displays is checked. Epson and Instant Off are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.