Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this cabinet.
WARNING! Use caution when handling and assembling the metal components. The metal
may have sharp edges or corners, the use of protective gloves is recommended.
Locate cabinet in a suitable working area and secure to a wall with suitable fasteners.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the cabinet clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the working area.
DO NOT climb, step or stand on the cabinet shelves.
DO NOT use the cabinet for any purpose other than that for which it is designed.
DO NOT exceed the maximum weight allowance for each shelf.
DO NOT use in damp work areas.
WARNING! The warnings, cautions and instructions referred to in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are factors which cannot be built into this product, but must
be applied by the operator.
2. INTRODUCTION
Two door wall cabinet features, silver-grey doors with graphite grey carcass to give a contemporary, robust appearance which reflects the
construction of the unit. The cabinet has outer and inner steel construction for extra strength and durability.
Added security provided by cylinder locks. Supplied with two keys.
Cabinet can be used individually or as part of a complete storage solution.
3. ASSEMBLY
3.1
Contents Inspection
Unpack all the parts and layout on the packing material. Check against the contents list to ensure all components are present.
3.2
Tools
The following tools will be required for the assembly: 10mm Socket Wrench, Philips Screwdriver, Spirit Level, Drill.
Contents
1
L/H Door
2
L/H Side Panel
3
Floor Panel
4
R/H Door
5
R/H Side Panel
6
Shelf
7
Back Panel
8
Hanger
9
Top Panel
10 Wall Bracket
11 Screw
12 Nut
13 Screw
14 Screw
15 Washer
16 Screw
17 Bumper
18 Lock and Keys
Fig.1
© Jack Sealey Limited
INSTRUCTIONS FOR:
2 DOOR WALL CABINET
AP02WC
MODEL No:
Original Language Version
AP02WC
Issue: 2(L) - 15/07/14
Advertisement
Related Manuals for Sealey AP02WC
Summary of Contents for Sealey AP02WC
- Page 1 AP02WC MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Back Panel Assembly (Fig.4) Slide the back panel inside the two side panels as shown in fig.3, align the holes and secure with screws (11) and nuts (12). DO NOT fully tighten. © Jack Sealey Limited Original Language Version AP02WC...
- Page 3 Open the doors and place the shelf panel (6) into the cabinet. Select the desired height and secure the shelf by lowering into the tabs in the back and side panels. The tabs may require opening up slightly with a flat bladed screwdriver. © Jack Sealey Limited Original Language Version...
- Page 4 Remove cabinet and drill the wall, insert wall fixings as required, replace cabinet and screw to the wall using screws (16) and washers (15). Original Language Version AP02WC Issue: 2(L) - 15/07/14 © Jack Sealey Limited...
-
Page 5: Maintenance
Parts support is available for this product. To obtain a parts list and diagram please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500 NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.