hit counter code
Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rae Manuals
  4. Modem
  5. RAELink3
  6. Quick reference

Rae RAELink3 Quick Reference

Hide thumbs Also See for RAELink3:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
The RAELink3 compact, portable radio-frequency modem provides long-range
wireless communication between remote portable air monitors and a base
station/computer for comprehensive monitoring. Up to 64 RAELink3-equipped
monitors can be networked with a single Host. For applications requiring long-
distance monitoring or monitoring in locations with obstructions to clear line-of-
sight communication, RAELink3s configured as Repeaters extend the effective reach
of the system.
The RAELink3 can be configured in the following three modes:
1. Remote.
The RAELink3 Remote functions as a slave modem and communicates
sensor data and GPS coordinates to a host modem with the same network ID.
2. Host.
The RAELink3 Host functions as a host modem and communicates with
multiple wireless modems (such as the RAELink3 Remote and RAELink3 Repeater,
as well as AreaRAE products equipped with RAELink-family Remote modems) with
the same network ID.
3. Repeater.
The RAELink3 Repeater functions as a repeater for RAELink3
Remote slave modems (or AreaRAE or RAELink series products) with the same
network ID.
Battery Replacement
The RAELink3 can use a rechargeable lithium-ion battery or an alkaline battery
pack. It can also be operated on its charger. To take the rechargeable battery or
alkaline battery pack out of the RAELink3, remove the 3 hex-socket screws and
lift it out. To replace the AA batteries in the alkaline battery pack, remove the
two hex-socket screws on the inside, remove the cover, and replace the 5 AA
batteries (Duracell MN1500 or Energizer E91 only). Make sure that the polarity
("+" and "-") for each battery is correct. Do not mix old and new batteries. Only
change batteries in a non-hazardous location.
Additional Information And Support
Read the RAELink3 User's Guide for additional information and details on
features and settings not covered in this Quick Reference. For support, contact
RAE Systems Technical Support at (888) 723-8823, or email
tech@raesystems.com.
RAELink3
Q U I C K R E F E R E N C E
RAE Systems, Inc.
3775 N. First St.
San Jose, CA 95134-1708 USA
Toll-free: 888-723-8823
Website: www.raesystems.com

Advertisement

loading

Related Manuals for Rae RAELink3

Summary of Contents for Rae RAELink3

  • Page 1 It can also be operated on its charger. To take the rechargeable battery or alkaline battery pack out of the RAELink3, remove the 3 hex-socket screws and lift it out. To replace the AA batteries in the alkaline battery pack, remove the two hex-socket screws on the inside, remove the cover, and replace the 5 AA batteries (Duracell MN1500 or Energizer E91 only).
  • Page 2 (part number 400-0189-000), or cordlessly with Bluetooth to monitors such as the MiniRAE3000 and ppbRAE3000. Third-party portable monitors require uniqu e cables to connect to the RAELink3. Make sure Bluetooth is turned on in any monitors that use Bluetooth. Host...

  • Page 3: Operation

    3. *The two units connect, and exchange ID numbers. The ID number of the monitor is shown below the icons. They are now connected. *The RAELink3 can scan for Bluetooth-enabled monitors, and stores up to 2 connections i memory for faster re-deployment. Upon powering on, the RAELink3 automatically searches for the primary Bluetooth device indicated by the asterisk in memory.
  • Page 4 Important! Ever y remote unit in a network must have a unique Unit ID. Note: When RAELink3 is configured as a Repeater or Host, it does not re quire a Unit ID. Some portable monitors require setting of the Unit ID on the monitor. Refer to the operation manual for the monitor.