hit counter code
Download
Share
Print this page
Makita Makstar BTD200 Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. BTD200
  6. Technical information
Makita Makstar BTD200 Technical Information

Makita Makstar BTD200 Technical Information

Hide thumbs Also See for Makstar BTD200:
1
2
3
4

Advertisement

Quick Links

Download this manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPTION AND MAIN APPLICATIONS
BTD200 is equipped with newly developed 24 V Ni-MH battery.
The method of speed change is electric 2 speed + variable speed change.
The max. fastening torque of 200 N.m (2,040Kgf.cm / 1,770in.lbs)
is suitable especially for tightening the wood screws of long size.
The variation of this model is as listed blow.
No.
Model No.
BTD200SH
B2417
BTD200SF
B2430
S
pecification
Voltage (V)
No load speed
(min
=rpm)
-1
Impact per minute
(min
=bpm)
-1
Driving shank : mm ( " )
Wood screws
Capacities
Self tapping screws
Hex screws
Charging time
with DC24SA
Net weight: kg (lbs)
** approx. 30 minutes / ** approx. 60 minutes : The figures left mentioned may be change depending
* 2.9 (6.3 lbs) : including the weight of battery 2417 / 1.7Ah.
O
ptional accessories
* Philips bits 2-34, 2-65, 2-82, 2-110, 2-150, 2-250, 3-45, 3-65, 3-110
* Socket bit 8-55, 3/8"-55,
* Bit piece
* Shoulder strap
* Battery B2417, B2430
* Charger DC24SA
BTD200
Cordless Impact Driver
Battery
Type
Q'ty
Ah
1.7 1 pc.
Ni-MH
3.0 1 pc.
High speed
Low speed
High speed
Low speed
** approx. 30 minutes
Model BTD200SH
** approx. 60 minutes
Model BTD200SF
Charger
DC24SA
Dimensions : mm ( " )
Width ( W )
Height ( H )
Length ( L )
D/C 24 V
0 - 2,000
0 - 1,600
0 - 3,000
0 - 2,500
6.35 ( 1/4 ) Hex
6 mm (1/4)
* 2.9 (6.3 lbs)
on the conditions of battery, room temperature, charger,
etc.
L
H
W
86 (3-3/8)
277 (10-7/8)
232 (9-1/8)
PRODUCT
P 1 / 4

Advertisement

loading

Related Manuals for Makita Makstar BTD200

Summary of Contents for Makita Makstar BTD200

  • Page 1 ECHNICAL INFORMATION PRODUCT P 1 / 4 BTD200 Models No. Description Cordless Impact Driver ONCEPTION AND MAIN APPLICATIONS BTD200 is equipped with newly developed 24 V Ni-MH battery. The method of speed change is electric 2 speed + variable speed change. The max.
  • Page 2 4 Hammer case Pull out in this direction Fig. 2 Anvil <3> Apply 0.5g of MAKITA grease N No.2 on the cylindric part of anvil, when inserting it into hammer case. Apply MAKITA grease N No.2 Fig. 3 <4> Disassembling hammer section (1) Grip the hammer section with large gear extracter No.1R045...
  • Page 3 (5)When assembling, adjust the "opening for steel ball inserting", to the "cam groove top" of spindle and insert steel ball 4 into hammer as illustrated in Fig. 5. (6) Apply MAKITA grease N No.2 in small volume to the position marked with black triangle mark. See Fig. 6.
  • Page 4 P 4 / 4 ircuit diagram Brush Holder Switch Bruch Holder Black Black White Speed Change Black Switch Orange iring diagram Terminal Brush holder lead wire (Red) Brush holder lead wire (Black) Fix the following lead wires Lead wire of speed change with lead holder.