Advertisement
Quick Links
Advertisement
Related Manuals for Electrolux TR260
Summary of Contents for Electrolux TR260
- Page 1 N°29458 D 10/2007 Vegetable preparation machine TR260 Instruction manual...
- Page 2 TR260 FR 03 07...
- Page 3 TR260 FR 05 2003...
- Page 4 TR260 FR 05 2003...
- Page 5 TR260 FR 03 07...
-
Page 6: Table Of Contents
• Packaged dimensions L x w x h (mm): • Dimensions of the machine with auto. hopper - TR260 motor unit: 800 x 520 x 580 - without table: 750 x 490 x 680 - Net weight: 49 kg - Packaged weight: 58 kg - with table: 750 x 490 x 1345 - Auto. - Page 7 • If it is turning in the opposite direction, change over the two phase wires in the plug. C Nominal voltage in volts (value, range or commutation) To PAT test the Electrolux Range of Food Preparation Equipment, D Frequency (Hertz) the PCB board needs to be disconnected before any test is done.
-
Page 8: Use And Safety
• If a hand is placed in the area where the products are dis- Stop button charged, it may be crushed or trapped by the rotating parts of Speed 1 start button the machine. Pulse operation button Speed 2 start button Speed indication lamps TR260 GB 10 07... - Page 9 - Passage for large products (volume of 2.5 L, corresponding into the small hopper one at a time or in handfuls. to 1/2 a cabbage). - Loading is carried out manually by sliding the products from the feed tray to the hopper. TR260 GB 10 07...
- Page 10 - push the products from the inside towards the outside of the tube. Note: With the long vegetable feed hopper in position, the machine Never insert a hard object in the feed hopper when the machine can then be started. is in operation. TR260 GB 10 07...
-
Page 11: Cleaning, Hygiene And Storage
- Lift it whilst turning backwards and forwards. - Place one hand fl at on the ejector and prevent it from tur- ning. - With your other hand, hold the outside of the disc in the fi ngers holes and turn sharply anti-clockwise TR260 GB 10 07... -
Page 12: Maintenance
- When the lid is opened, dimension E at 18 mm max, - have it adjusted by the service department of your local dealer. - when the feed arm is opened, if the gap F is at maximum 60 mm from the edge of the feed hopper. TR260 GB 10 07... -
Page 13: Conformity With Regulations
- To the European standards : instructions for their use. EN 60 204-2006 electrical equipment of machines, The machine has been CNERPAC approved for food hygiene as EN 1678-1998 vegetable cutters, integrated safety devices. well as conforming NSF standard 8. TR260 GB 10 07...