Table of Contents
Advertisement
After installing the M.2 drive and M.2 backplane:
1. Reinstall the riser assembly next to the M.2 backplane. See "Install a riser card" on page 65.
2. Complete the parts replacement. See "Complete the parts replacement" on page 34.
3. Use the Lenovo XClarity Provisioning Manager to configure the RAID. For more information, see:
http://sysmgt.lenovofiles.com/help/topic/LXPM/RAID_setup.html
RAID super capacitor module replacement
Use this information to remove and install a RAID super capacitor module.
The RAID super capacitor module protects the cache memory on the installed RAID adapter. You can
purchase a RAID super capacitor module from Lenovo.
For a list of supported options, see:
http://www.lenovo.com/us/en/serverproven/
Install a RAID super capacitor module on the bottom of the air baffle
Use this information to install a RAID super capacitor module on the bottom of the air baffle.
Chapter 4 "Read
the
installation
Guidelines" on
page 29
Notes: Your server supports up to two RAID super capacitor modules.
• For server models with 3.5-inch drive bays, install the first RAID super capacitor module in location
install the second RAID super capacitor module in location
• For server models with 2.5-inch drive bays:
– If you have a RAID super capacitor module holder in location
module in location
– If you do not have a RAID super capacitor module holder in location
super capacitor module in location
2
.
92
ThinkAgile MX Certified Node 1UThinkAgile MX3321-H, MX3321-FUser Guide
for this task"
3
and install the second RAID super capacitor module in location
1
and install the second RAID super capacitor module in location
"Power off
the server
on page 34
2
.
3
, install the first RAID super capacitor
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 31
1
.
3
, you can install the first RAID
1
and
Advertisement
Table of Contents
