Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
This manual covers several different models. The washer you have purchased may have some or all of the parts and features listed below. A. Control panel B. Model and serial number label C. Liquid fabric softener dispenser D. Agitator Control panel PARTS AND FEATURES E.
Understanding Washer Cycles When the washer lid is closed and the Cycle Control knob is set to a number or cycle and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid down.
WARNING Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.
6. Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions. Your washer uses automatic temperature control (on some models) to maintain a uniform water temperature by regulating the incoming hot and cold water.
Selecting a Cycle and Time This section describes the available wash cycles and will help you make the best cycle selections for your wash loads. Each cycle is designed for different types of fabric and soil levels. ■ The washer pauses briefly throughout each cycle. These pauses are normal.
Cleaning Your Washer Cleaning the exterior Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach. Occasionally wipe the outside of your washer to keep it looking new. Cleaning the interior Clean your washer interior by mixing 250 mL of chlorine bleach and 500 mL of detergent.
First try the solutions suggested here and possibly avoid the cost of a service call... Washer won’t fill, rinse or agitate; washer stops WARNING Electrical Shock Hazard Plug into a grounded (earthed) outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord.
Page 11
Washer leaks ■ Check the following: Are the fill hoses tight? Are the fill hose washers properly seated? Is the drain hose clamp properly installed? See the Installation Instructions. ■ Is the sink or drain clogged? Sink and standpipe must be able to handle 64 L of water per minute.
“Troubleshooting.” It may save you the cost of a service call. If you still need help, contact the dealer from whom you purchased the washer, or a Whirlpool designated service company. When calling, please know the purchase date and the complete model and serial number of your appliance.