en Table of contents Safety and warning information ..... 27 Directions for disposal ........28 Specifications supplied ........28 Installing the appliance ........28 Installation dimensions ........30 Door opening angle ........30 Connecting the appliance ......31 Fitting the doors ..........33 Getting to know the appliance ......
Do not use the base, rails, doors, etc. as a step or ■ enTable of contentse n I n s t r u c t i o n s f o r u s e support. For defrosting and cleaning, unplug the appliance ■...
General requirements Specifications supplied Chilling and freezing food, ■ Making ice cubes. ■ The appliance supplied consists of the following components: Free-standing appliance ■ Features (vary depending on the model) ■ Bag of assembly materials ■ Instructions for use and installation ■...
Page 29
Floor surface Observe the room temperature and ventilation requirements Climate class Permissible room temperature Note...
Installation dimensions Spacers *720 mm with spacers Dimensions in mm Dimensions in mm Side panel clearance min. 22 Side panel depth Drawers can be pulled out fully at door opening of 145° Dimensions in mm min. Drawers can be pulled out fully at door opening of 145°...
2. So that the appliance cannot move, unscrew the two Connecting the appliance front feet until they are standing firmly on the floor. 3. Screw the feet in/out until the appliance is exactly level. Use the appliance doors as a reference point. 4.
Page 32
If the appliance is exactly level but one of the doors is Note lower than the other: 1. Open the appliance doors. 2. Unscrew the 3 screws holding the base panel and remove it. 3. Undo the nut. 4. Turn the adjusting nut until the appliance doors are aligned.
Checking the water pipes for leaks 9. Check the connections to the freezer compartment door for leaks. 1. Plug the mains plug into the mains outlet socket. 2. Open the fridge compartment door. 3. Fill drinking water into the water tank. 10.Put the base panel back in place and secure it with the 3 screws.
Getting to know the appliance Appliance The illustrations may differ from your particular model. Note Freezer compartment drawers...
Page 35
Lighting For setting the temperature in the freezer ■ compartment. For switching fast freezing function on and off. ■ Water Switches the light for the ice/water dispenser ■ on or off. Ice cubes Crushed ice Switches off the display of the temperature ■...
Freezer compartment Switching on the appliance Fridge compartment +4 °C ■ Freezer compartment -18 °C ■ After switching on the appliance, it may be several ■ hours before the set temperatures are reached. Thanks to the fully automatic NoFrost system, the ■...
2. Simultaneously press and hold the "Light" and Freezer compartment "Water" buttons for 10 seconds. when the appliance is first used. ■ when putting large quantities of fresh food in the ■ freezer. if the freezer compartment door is left open for too ■...
Fridge compartment Switch on the fast freezing function before placing ■ the food in the freezer (see section headed Fast Keep fresh, untouched food in the fridge. In that way ■ freezing). it will keep longer and stay fresher. Remove the freezer compartment fittings. In the case of ready-made products and packaged ■...
Storage life of frozen foods Freezing fresh food Fish, sausages, prepared dishes, baked goods: ■ Cheese, poultry, meat: ■ Vegetables, fruit: ■ Note ■ Baked goods, fish and seafood, meat, game, poultry, vegetables, fruit, herbs, eggs without their shells, at ambient temperature dairy products such as cheese, butter and curd ■...
Page 41
Points to observe when switching on for Filling the water tank the first time Caution milk, ■ juice, ■ carbonated beverages, ■ alcoholic beverages, ■ warm beverages. ■ 1. Flip up the cover and open the lid. 2. Fill drinking water into the water tank. 3.
Page 42
Dispensing water Dispensing ice Note The water dispenser switches off after one minute and the display panel briefly shows "ES". This means that water can be drawn off for one minute. 1. Press the "Water" button. The display panel shows the "Water"...
Switching off the ice-maker Fittings 1. Press and hold the "Ice cubes/Crushed ice" button for 3 seconds. Removing In the display, the symbols "Ice cubes", "Crushed ice" and "Lock" flash for approx. 3 seconds. Inserting Then the water dispensing is switched on and the symbol "Water"...
Switching off and shutting Cleaning the appliance down the appliance Caution Do not use gritty, acidic or chlorine-based cleaning ■ agents or solvents. Do not use abrasive cleaning pads or sponges that ■ may scratch surfaces. This may lead to corrosion of the metallic surfaces.
4. Slide the outlet at the bottom out of the guide and Water spillage tray pull it out upwards. 1. To empty and clean it, remove the strainer. 5. Remove the outlet filter. 2. Clean the water spillage tray with a sponge or absorbent cloth.
Lighting (LED) Operating noises Install the appliance in a dry, well ventilated room. ■ The appliance must be installed out of direct sunlight and away from heat sources (e.g. heating elements, cooker). Allow hot food and drinks to cool before placing ■...
Rectifying minor faults yourself Before calling After-sales Service: Check whether you can rectify the fault yourself by using the notes below. – Appliance Problem Possible cause Remedy Appliance is not cooling/ Power cut. Check whether there is power to the freezing.
Problem Possible cause Remedy Ice-maker not making any ice. Ice-maker is switched off. Switch on the ice-maker. Freezer compartment temperature Set a slightly colder temperature for the too high. freezer compartment. Ice-cube container not inserted Check the position, re-insert if necessary. properly.