hit counter code
Huawei ECC500 User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Control Unit
  5. ECC500
  6. User manual
Huawei ECC500 User Manual

Huawei ECC500 User Manual

Hide thumbs Also See for ECC500:
Table of Contents

Advertisement

Quick Links

ECC500
V600R001C03
User Manual
Issue
05
Date
2020-03-16
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei ECC500

Summary of Contents for Huawei ECC500

  • Page 1 ECC500 V600R001C03 User Manual Issue Date 2020-03-16 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    About This Document About This Document Purpose This document describes the energy control center 500 (ECC500 for short) in terms of its overview, configurations, ports, installation, commissioning, user interfaces, maintenance, and troubleshooting, providing guidelines for onsite installation personnel and technical support engineers.
  • Page 4  Updated some MDU screenshots. Issue 02 (2018-05-20) Updated section "How Can I Change the ECC500 IP Address on the WebUI?". Updated section "How Should I Link an AI/DI Alarm to a DO Port". Issue 01 (2017-10-28) Added section "How Should I Link an AI/DI Alarm to a DO Port".

  • Page 5: Table Of Contents

    4 Installation and Commissioning ..................27 4.1 Installation and Commissioning Flowchart ......................27 4.2 Installing Devices ..............................27 4.2.1 Installing a Rack-mounted ECC500 ........................27 4.2.2 Installing a Wall-mounted ECC500 ........................29 4.2.3 (Optional) Installing a Rack-mounted Independent Deployment AI/DI Unit ............29 4.2.4 (Optional) Installing a Wall-mounted Independent Deployment AI/DI Unit ............31 4.3 Connecting Cables ..............................31...
  • Page 6 5.2.3.3 Adding a Door Status Sensor ...........................61 5.2.3.4 Adding a Water Sensor ............................62 5.2.3.5 Adding a Device Connected to a DI Port on the GPRS Expansion Card ............63 5.2.4 Adding UPSs ..............................66 Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 7 6.4 Parts Replacement .............................. 103 7 FAQ ............................105 7.1 ECC500 Device Cascading Rules ........................105 7.2 What Can I Do If the ECC500 Collector Cannot Be Logged In on the WebUI? ............ 105 Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 8 7.15 How Can I Set Temperature and Humidity Alarm Thresholds for a T/H Sensor? ..........120 7.16 How Can I Change Fan Alarm Thresholds and Reset a Fan? ................121 7.17 How Can I Delete a Device Failing in Communication or Restart the ECC500? ..........123 7.18 How Can I View Performance Data? ......................... 124 7.19 How Can I View Operation Logs? ........................

  • Page 9: Safety Information

    The "NOTICE", "CAUTION", "WARNING", and "DANGER" statements in this document do not cover all the safety instructions. They are only supplements to the safety instructions. Huawei will not be liable for any consequence caused by the violation of general safety requirements or design, production, and usage safety standards.
  • Page 10  Keep irrelevant people away from the equipment. Only operators are allowed to access the equipment.  Use insulated tools or tools with insulated handles, as shown in the following figure. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 11  To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telecommunication network voltage (TNV) circuits. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 12: Personnel Requirements

    Do not power on the equipment before it is installed or confirmed by professionals. 1.2 Personnel Requirements  Personnel who plan to install or maintain Huawei equipment must receive thorough training, understand all necessary safety precautions, and be able to correctly perform all operations.
  • Page 13 When selecting, connecting, and routing cables, follow local safety regulations and rules. The static electricity generated by human bodies may damage the electrostatic-sensitive components on boards, for example, the large-scale integrated (LSI) circuits. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Installation Environment Requirements

     Ensure that the equipment room provides good heat insulation, and the walls and floor are dampproof.  Install a rat guard at the door of the equipment room. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 15: Mechanical Safety

    Before hoisting objects, ensure that hoisting tools are firmly secured onto a load-bearing object or wall.  Ensure that the angle formed by two hoisting cables is no more than 90 degrees, as shown in the following figure. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 16 Do not climb higher than the fourth rung of the ladder from the top.  Ensure that your body's center of gravity does not shift outside the legs of the ladder. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Others

    Metal shavings from drilling may short-circuit boards inside the equipment.  Obtain the consent from the customer, subcontractor, and Huawei before drilling.  Wear goggles and protective gloves when drilling holes. ...
  • Page 18 UPS output voltage level or frequency. Doing so may affect the power supply to equipment.  Exercise caution when setting battery parameters. Incorrect settings will affect the power supply and battery lifespan. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Overview

    2.2 Features Hardware Functions  The ECC500 supports AC inputs of 100 V to 240 V, 50 Hz or 60 Hz, and can be used worldwide.  RS485 Communication Card, AI/DI Expansion Card and independent deployment AI/DI unit support only RJ45 terminals, minimizing cable types, simplifying delivery, and enabling fast deployment.

  • Page 20: Typical Application Scenarios

    The ECC500 supports the automatic assess of sensors such as water sensors and NTC resistor-based temperature sensors, simplifying delivery and deployment.  The ECC500 provides the 12 V DC power supply to devices such as sensors and audible and visual alarms. Additional power supply to these devices is not needed. ...
  • Page 21 Local Management If the ECC500 is used for local management, there is no need to configure the NMS and the ECC500 works as a data collector and manager. The ECC500 collects, analyzes, and processes device data, while users manage the devices on the ECC500 WebUI.
  • Page 22 ECC500 User Manual 2 Overview Figure 2-3 Networking for local management For the devices that can be connected to and managed by the ECC500 used for local management, see Devices Managed by the ECC500. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Configurations And Port

    3 Configurations and Port Configurations and Port 3.1 Configurations The ECC500 consists of a power module, a main control module, an RS485 expansion card, and an AI/DI expansion card. The detailed configuration rules are as follows:  An ECC500 with standard configurations consists of a main control module, a power...
  • Page 24 ECC500 User Manual 3 Configurations and Port Table 3-1 ECC500 component functions Hardware Silk Screen Configuration Function Main control SMU03A Mandatory (1 PCS)  Provides an LCD to query, module set, and control local parameters.  Provides an operating status indicator and alarm indicator.

  • Page 25: Port

    Figure 3-2 Front panel of the main control module (1) Indicators (2) LCD (3) Button (4) FE port (5) RS485/RS232 port (6) COM1 port (7) COM2 port (8) USB port Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 26 After a menu is displayed, the LCD screen becomes dark if no button is pressed within 30 seconds. Port Description Table 3-4 describes ports on the front panel of the main control module. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Power Module

    Table 3-5 Performance specifications of the power module Parameter Description Operating 100–240 V AC voltage range Rated operating 110 V AC/220 V AC voltage Frequency 50 Hz/60 Hz Rated output 53.5 V DC/15 V DC voltage Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 28: Rs485 Communication Card

    Description Structure The subrack of the power module is less than 1 U high and occupies two slots of the ECC500 subrack. 3.2.3 RS485 Communication Card The RS485 communication card provides five half-duplex RS485 communication interfaces that are compatible with two-wire and four-wire cables and connect to the southbound intelligent equipment, Independent Deployment AI/DI Unit, and intelligent ambient temperature and humidity sensor.
  • Page 29 Independent Deployment AI/DI Unit, intelligent ambient temperature and humidity sensors, and electronic door locks.  1: A  2: B  3: 12 V DC power  4: A  5: B  8: GND Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Ai/Di Expansion Card

    The AI/DI expansion card provides four AI/DI input ports to connect monitoring sensors and provide the DO control function. Figure 3-6 shows ports on the front panel of the AI/DI expansion card. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 31 The AI/DI second on and expansion card 0.125 second fails to off) communicate with the main control module. Alarm indicator No alarm is generated. Steady on A board alarm is generated. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Independent Deployment Ai/Di Unit

    Independent Deployment AI/DI Unit addresses can only be 1 or 2. When the AI/DI expansion card installed in the ECC500 has insufficient space for AI/DI data collection, you can connect an Independent Deployment AI/DI Unit to the AI/DI expansion card using an RS485 bus.
  • Page 33 Blinking (0.125 The Independent second on and Deployment 0.125 second AI/DI Unit fails off) to communicate with the main control module. Alarm indicator No alarm is generated. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 34 50 m), set toggle switch 4 to ON for the furthest independent deployment AI_DI unit. After the DIP switch settings are modified, power off and restart the independent deployment AI_DI unit for the new settings to take effect. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Installation And Commissioning

    User Manual 4 Installation and Commissioning Installation and Commissioning 4.1 Installation and Commissioning Flowchart Figure 4-1 shows the flowchart for installing and commissioning the ECC500. Figure 4-1 ECC500 installation and commissioning flowchart 4.2 Installing Devices 4.2.1 Installing a Rack-mounted ECC500 Prerequisites ...
  • Page 36 Ensure that the floating nuts on both sides are on the same horizontal line. Step 2 Place the ECC500 on the correct guide rails in the cabinet. Step 3 Secure the ECC500 in the cabinet by tightening the M6 screws clockwise on the right and left mounting ears, as shown by (2) in Figure 4-3.

  • Page 37: Installing A Wall-Mounted Ecc500

    Step 3 Drill holes at the marked installation position (hole spacing: 52 mm x 472 mm) on the wall using a hammer drill, and install four M8 expansion bolts into the holes. Step 4 Install the ECC500 at the expansion bolts on the wall and ensure that the rear panel of the ECC500 is flush with the wall.
  • Page 38 Step 3 Secure the Independent Deployment AI/DI Unit in the cabinet by tightening the M6 screws clockwise on the right and left mounting ears, as shown in Figure 4-6. Figure 4-6 Installing a rack-mounted Independent Deployment AI/DI Unit ----End Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 39: Optional) Installing A Wall-Mounted Independent Deployment Ai/Di Unit

    4.3 Connecting Cables 4.3.1 Connecting Ground Cables After an ECC500 or an Independent Deployment AI/DI Unit is installed, connect a ground cable to it and connect the other end of the ground cable to the cabinet or site ground point.

  • Page 40: Connecting To An Ip Network

    ECC500 and an IP network. Figure 4-9 Connecting to an IP network 4.3.3 Connecting Monitoring Cables All AI/DI and RS485 ports on expansion cards of the ECC500 are connected to monitoring components using standard Ethernet cables with RJ45 connectors, as shown in Figure 4-10.

  • Page 41: Connecting Power Cables

    Figure 4-10 Connecting monitoring cables Connect an audible and visual alarm to the ECC500 using the delivered adapter. 4.3.4 Connecting Power Cables The power module of the ECC500 is connected to the external power supply using a power cable. Figure 4-11 shows the cable connection.

  • Page 42: Connecting Cables

    Figure 4-12 Connecting cables to sensors 4.3.5.2 Connecting the ENR1DETA MODULE T/H Sensor Monitoring Cable Context  When connecting a T/H sensor to the ECC500, perform the following steps to prepare a special monitoring cable. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Connecting The Ws332M2-5 T/H Sensor Monitoring Cable

    4-14. Figure 4-14 Preparing an RJ12 connector (unit: mm) Step 3 Plug the RJ45 connector to an RS485 port with 12 V power supply in the ECC500 and the RJ12 connector to the RS485 port in the T/H sensor. ----End 4.3.5.3 Connecting the WS332M2-5 T/H Sensor Monitoring Cable...

  • Page 44: Connecting The Ups2000-G-B Monitoring Cable

    Step 3 Route the network cable through the hole on the rear cover middle, then plug one RJ45 connector to an RS485 port with 12 V power supply in the ECC500 and the other one to the RS485 port in the T/H sensor.

  • Page 45: Connecting The Ups2000-G-A Monitoring Cable

    Step 1 Prepare RJ45 connectors on both ends of a network cable, as shown in Figure 4-13. Step 2 Plug one RJ45 connector to an RS485 port in the ECC500 and the other one to the RS485 port in the UPS2000-G-A. ----End Issue 05 (2020-03-16) Copyright ©...

  • Page 46: Connecting The Ups5000-E Monitoring Cable

    Step 1 Prepare RJ45 connectors on both ends of a network cable, as shown in Figure 4-13. Step 2 Plug one RJ45 connector to an RS485 port in the ECC500 and the other one to the RS485 port in the UPS5000-E. ----End 4.3.5.7 Connecting the UL33 UPS Monitoring Cable...

  • Page 47: Connecting The Netcol8000-A Monitoring Cable

    Step 1 Prepare RJ45 connectors on both ends of a network cable, as shown in Figure 4-13. Step 2 Plug one RJ45 connector to an RS485 port in the ECC500 and the other one to the RS485 port in the NetCol8000-A. ----End 4.3.5.10 Connecting the PDU8000 Monitoring Cable...

  • Page 48: Connecting The Pd510 Coulometer Monitoring Cable

    4-18, PDU8000 wiring terminal 1 is RS485+ and wiring terminal 2 is RS485-. Figure 4-18 PDU8000 wiring terminal Step 3 Plug the RJ45 connector to an RS485 port in the ECC500. ----End 4.3.5.12 Connecting the PD510 Coulometer Monitoring Cable Context...

  • Page 49: Connecting The Fan Monitoring Cable

    Step 1 Prepare RJ45 connectors on both ends of a network cable, as shown in Figure 4-13. Step 2 Plug one RJ45 connector to the COM1 port on the main control module of the ECC500 and the other one to the COM_OUT port on the fan. ----End Issue 05 (2020-03-16) Copyright ©...

  • Page 50: Commissioning Devices

    Independent Deployment AI/DI Unit in the manner specified in 4.3.5 Connecting Cables. Connect the external power supply to the power module to power on the ECC500. Checking Indicator Status Check the indicators on the main control module, RS485 expansion card, AI/DI expansion card, and Independent Deployment AI/DI Unit.
  • Page 51 You can view active alarms over the LCD, as shown in Figure 4-21. Figure 4-21 Viewing active alarms Basic Settings (LCD) Figure 4-22 shows how to set the LCD contrast. Figure 4-22 Setting the LCD contrast Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 52: Setting The Enr1Deta Module T/H Sensor Device Address

    Figure 4-23 Changing the password Figure 4-24 shows how to restore ECC500 factory settings over the LCD. Restoring factory settings will restore the ECC500 parameters to their factory settings. Perform this operation with caution. Figure 4-24 Restoring factory settings 4.4.1 Setting the ENR1DETA MODULE T/H Sensor Device...

  • Page 53: Setting The Ws332M2-5 T/H Sensor Device Address

    UPS2000-G-A V100R001 is used and equipped with an LCD screen, as shown in Figure 4-25. Figure 4-25 LCD screen display Procedure Step 1 Operate the DIP switch S2 on the optional Modbus card to set the UPS2000-G-A device address. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 54: Setting The Ups2000-G-B Device Address

    Toggles 1 to 8 of DIP switch S1 specify the device address in binary mode. ON indicates 1, and OFF indicates 0. Table 4-5 shows an example of the switch settings. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 55: Setting The Ups5000-E Device Address

    RS485 address Indicates the device address assigned to the UPS5000-E. The addresses of devices connected to a same port must be unique. When creating a UPS5000-E on the ECC500 WebUI, enter this value in Equipment Address. RS485 baud rate Retain the default value 9600.

  • Page 56: Setting The Ul33 Ups Device Address

    Procedure Step 1 The default address of the UL33 UPS is 1 and does not need to be set. Fill the address in Equipment Address when creating a UL33 UPS on the ECC500 collector. ----End 4.4.7 Setting the NetCol5000-A Device Address Prerequisites ...

  • Page 57: Setting The Netcol8000-A Device Address

    Indicates the device address planned for the NetCol8000-A. The addresses of devices connected to the same collector port must be unique. When creating a NetCol8000-A on the ECC500 WebUI, enter the value in Device address. Baud Rate Retain the default value 9600.

  • Page 58: Setting The Abb Otm Ats Device Address

    Indicates the device address assigned to the PDU8000. The addresses of devices connected to a same port must be unique. When creating a PDU8000 on the ECC500 WebUI, enter this value in Equipment Address. The DataBit, StopBit, and Parity for the PDU8000 cannot be set on the WebUI. Their default values are 8, 1, and None respectively.

  • Page 59: Setting The Pd510 Coulometer Device Address

    4 Installation and Commissioning Set the device address for the ABB OTM ATS. The addresses of devices connected to a same port must be unique. When creating an ABB OTM ATS on the ECC500 WebUI, enter this value in Equipment Address.

  • Page 60: Ui Description

    ECC500 User Manual 5 UI Description UI Description 5.1 LCD The LCD of the ECC500 is located on the front panel of the main control module. It allows you to:  View active alarms.  View the running status of the system.

  • Page 61: Lcd Operations

    LCD. For details about buttons on the front panel of the main control module, see LCD/Buttons.  The figure is for reference only. Selecting a Language After powering on the ECC500, select English by pressing , as shown in Figure 5-2, and then press to enter the standby screen.

  • Page 62: Webui

    If the ECC northbound interface is connected by a NetEco, devices connected to the COM port on the ECC500 do not need to be added on the ECC WebUI, such as the UPS, temperature and humidity sensor, NetCol, PDU8000, and ATS.

  • Page 63: Commissioning Preparations

    Preset value: To ensure access security, 192.168.1.168 change the IP address upon first login. For details, see 7.4 How Can I Change the ECC500 IP Address on the LUI? 7.5 How Can I Change the ECC500 IP Address on the WebUI?.

  • Page 64: Adding A T/H Sensor

    You can log in to the ECC500 WebUI using Windows 7, Windows XP, Internet Explorer 8.0 or later, Firefox, or Chrome. It is recommended that you log in to the ECC500 WebUI using Internet Explorer 8.0, FireFox32.0, and Chrome37.0.2062.103 m in Windows 7, and using FireFox32.0 in Windows XP.
  • Page 65 Step 3 Set User Name and Password, and click Log In. The WebUI login page is displayed, as shown in Figure 5-7. Figure 5-7 ECC500 WebUI login page Step 4 Choose Home > Equipment Manage. Step 5 Select Temp/Hum from the Equipment Type drop-down list box and set device parameters, as shown in Figure 5-8.
  • Page 66 The setting example indicates that the T/H sensor is connected to the COM5 port of the RS485 card in slot 3 of the ECC500. If the T/H sensor is connected to another port, set the slot number for the connected port.

  • Page 67: Adding Dry Contact Devices

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...

  • Page 68: Adding An Spd

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...

  • Page 69: Adding A Door Status Sensor

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context A door status sensor should be connected to the AI/DI_3 port on the MUE05A4 of the ECC500 by default.

  • Page 70: Adding A Water Sensor

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...

  • Page 71: Adding A Device Connected To A Di Port On The Gprs Expansion Card

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...
  • Page 72 Step 10 Click Submit. Step 11 Set DI_2 DI Level to NO. Step 12 Set DI_2 Sensor Name, for example, to Mains_power_supply. Step 13 Click Submit. Figure 5-14 shows the configured page. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 73 Figure 5-15. Figure 5-15 Masking DG or mains status alarms ----End Follow-up Procedure After setting the parameters, choose Monitoring > MUC01A1 > Running Parameter to view the DG and mains status. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Adding Upss

    Figure 5-16 Adding a UPS2000-G The setting example indicates that the UPS2000-G is connected to the COM2 port of the RS485 card in slot 3 of the ECC500. If the UPS2000-G is connected to another port, set the slot number for the connected port.

  • Page 75: Adding A Ups5000-E

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a UPS5000-E is connected to the ECC500, add the UPS5000-E on the ECC500 WebUI.
  • Page 76 NOTE The setting example indicates that the UPS5000-E is connected to the COM2 port of the RS485 card in slot 3 of the ECC500. If the UPS5000-E is connected to another port, set the slot number for the connected port.

  • Page 77: Adding The Ea800 Ups

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After the EA800 UPS is connected to the ECC500, add the EA800 UPS on the ECC500 WebUI.

  • Page 78: Adding A Ul33 Ups

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a UL33 UPS is connected to the ECC500, add the UL33 UPS on the ECC500 WebUI.
  • Page 79 The setting example indicates that the UL33 UPS is connected to the COM2 port of the RS485 card in slot 3 of the ECC500. If the UL33 UPS is connected to another port, set the slot number for the connected port.

  • Page 80: Adding A Netcol5000-A

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a NetCol5000-A is connected to the ECC500, add the NetCol5000-A on the ECC500 WebUI.

  • Page 81: Adding A Netcol8000-A

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a NetCol8000-A is connected to the ECC500, add the NetCol8000-A on the ECC500 WebUI.
  • Page 82 NOTE The setting example indicates that the NetCol8000-A is connected to the COM5 port of the RS485 card in slot 3 of the ECC500. If the NetCol8000-A is connected to another port, set the slot number for the connected port.

  • Page 83: Adding A Pdu8000

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a PDU8000 is connected to the ECC500, add the PDU8000 on the ECC500 WebUI.

  • Page 84: Adding An Abb Otm Ats

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After an ATS is connected to the ECC500, add the ATS on the ECC500 WebUI.
  • Page 85 NOTE The setting example indicates that the ATS is connected to the COM5 port of the RS485 card in slot 3 of the ECC500. If the ATS is connected to another port, set the slot number for the connected port.

  • Page 86: Adding A Pd510 Coulometer

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context After a PD510 coulometer is connected to the ECC500, add the PD510 coulometer on the ECC500 WebUI.

  • Page 87: Adding A Networked Device

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context Networked devices, such as ATMs, are devices with the same IP attributes in an equipment room or site.
  • Page 88 Step 3 Set User Name and Password, and click Log In. The WebUI login page is displayed, as shown in Figure 5-26. Figure 5-26 ECC500 WebUI login page Step 4 Choose Monitoring > System Equipment > Running Parameter. Step 5 Set Enable online detection to Enable. Step 6 Click Submit.

  • Page 89: Optional) Adding A Video Link

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...
  • Page 90 Step 5 Select the video link to be submitted, and click Submit. Step 6 Click View in Video Info List to display the linked camera page. Figure 5-29 Viewing camera information ----End Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 91: Optional) Setting Snmp Monitoring Parameters

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...
  • Page 92 Step 9 Set Trap Target Address to the NetEco server IP address, Trap Port to the user-defined port number, and SNMP Version to the required version. Step 10 After setting the parameters, click Confirm. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Optional) Setting The Security Certificates For The Ecc500 Collector And The Network Management System

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. ...
  • Page 94 ----End Follow-up Procedure Import the NMS security certificate and key issued by an authorized party into the upper-level NMS of the ECC500 collector. Then the ECC500 collector will be able to communicate with the network management system. Issue 05 (2020-03-16)

  • Page 95: Optional) Changing The Challenge Certification Password

    5.2.14 (Optional) Changing the Challenge Certification Password Prerequisites  You have obtained the IP address of the ECC500 collector as well as the user name and password used for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch.
  • Page 96 Save the current configuration file to the PC. Step 4 Import a configuration file. Log in to the WebUI of the ECC500 to which a configuration file is to be imported. Choose Maintenance > Configuration File. Click Browse, specify the path where the configuration file is stored in the PC, and click Upload.

  • Page 97: Optional) Viewing The Real-Time Surveillance Screen, Active Alarms, Historical Alarms, And Historical Data

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 98: Maintenance And Troubleshooting

    The ALM indicator is off. 6.2 Alarm Reference This section describes the alarm reference and troubleshooting methods for the ECC500 in the NetEco. All alarm IDs in this document are the alarm IDs allocated by the NetEco. Issue 05 (2020-03-16)

  • Page 99: Alarm Reference For The Rs485 Communication Card

    ----End Clearing This alarm is cleared when the board is securely inserted into the subrack and the communication between the board and the ECC500 resumes. 6.2.1.2 MUS02A_COM4 Voltage Low Alarm Description This alarm is generated when the output voltage of the COM4 port is below the alarm threshold.

  • Page 100: Alarm Reference For The Ai/Di Expansion Card

    AI/DI_1 port on the AI/DI expansion card. 6.2.2.1 MUE05A_Board Not Exist Description This alarm is generated when the board is not securely inserted or is faulty. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 101: Mue05A_Aidi_1 Di Alarm

    ----End Clearing This alarm is cleared when the board is securely inserted into the subrack and the communication between the board and the ECC500 resumes. 6.2.2.2 MUE05A_AIDI_1 DI Alarm Description This alarm is generated when the normally open (NO) dry contacts are closed or the normally closed (NC) dry contacts are open.

  • Page 102: Mue05A_Aidi_1 Sensor Fault

    The sensors are faulty. Procedure Step 1 Check whether onsite signal volumes exceed the allowed ranges. Step 2 Check that sensor cables are properly connected. Step 3 Replace the faulty sensors. ----End Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 103: Mue05A_Aidi_1 Over Alarm

    This alarm is cleared when the values reported by the sensors are within the allowed ranges. 6.2.2.5 MUE05A_AIDI_1 Lower Alarm Description This alarm is generated when the values reported by the sensors are below the lower alarm thresholds. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 104: Mue05A_Aidi_1 Voltage Low Alarm

    Alarm ID Alarm Severity Alarm Type 22651 Set to Major by default. Equipment alarm Impact on the System After this alarm is generated, the equipment keeps running, but sensors may be affected. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 105: Mue05A_Aidi_1 Sensor Connection Error Alarm

    Step 2 Check that the sensor types on the WebUI match the actual sensor types. ----End Clearing This alarm is cleared when the types of sensors detected by AIDI_1 match the specified types and sensor cables are correctly connected. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 106: Alarm Reference For The Independent Deployment Ai/Di Unit

    Step 2 Rectify faults in the power supply. Step 3 Replace the faulty board. ----End Clearing This alarm is cleared when the board is properly connected and the communication between the board and the ECC500 resumes. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 107: Mue06A_Power Voltage Low Alarm

    ----End Clearing This alarm is cleared when the power voltage exceeds the alarm clearance threshold. 6.2.4 Comm Failed Description This alarm is generated when a networked device is disconnected from the ECC500. Attribute Alarm ID Alarm Severity Alarm Type Critical...

  • Page 108: Network Device Connect Fail

     The ECC500 communications board is faulty.  The device is faulty. Procedure Step 1 Check whether the communications cable between the ECC500 and the device is disconnected.  If yes, reconnect the communications cable.  If no, go to Step Step 2 Check whether the ECC500 communications board is faulty.

  • Page 109: Ecc500 Network Fault

    User Manual 6 Maintenance and Troubleshooting  The networked device is faulty. Procedure Step 1 Check whether the communications cable between the ECC500 and the networked device is disconnected.  If yes, reconnect the communications cable.  If no, go to Step Step 2 Check whether the parameters are correctly set for the networked device.

  • Page 110: Troubleshooting

    ECC500 User Manual 6 Maintenance and Troubleshooting Procedure Step 1 Check whether the communications cable between the ECC500 and the switch is disconnected.  If yes, reconnect the communications cable.  If no, go to Step Step 2 Check whether the ECC500 is faulty.

  • Page 111: Parts Replacement

    Context This section describes how to replace parts of the ECC500.  Before replacing parts, ensure that the power supply to the ECC500 has been disconnected and power cable terminals have been removed.  Only trained and qualified personnel are allowed to perform the operations.
  • Page 112 6-1. Figure 6-1 Removing an old module Step 4 Grasp the handle of the new module and put the module into the correct slot in the ECC500 subrack. Step 5 Push the new module into the subrack until their front panels are aligned with each other.

  • Page 113: Faq

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context Use Internet Explorer 8 as an example.

  • Page 114: How Can I Install A Network Security Certificate

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. ...

  • Page 115: How Can I Change The Ecc500 Ip Address On The Lui

    You have obtained the IP address, subnet mask, and default gateway information planned for the ECC500. Context A unified IP address (192.168.1.168) is configured for all ECC500s before delivery. Reconfigure an IP address for the ECC500 as required to ensure normal communication with a server. Procedure Step 1 Press on the ECC500 LUI.

  • Page 116: How Can I Change The Ecc500 Ip Address On The Webui

    Procedure Step 1 On a PC which is in the same IP address segment as the ECC500, enter https://192.168.1.168 in the address box, and press Enter on the keyboard. Step 2 (Optional) Install a network security certificate if a certificate problem message is displayed.
  • Page 117 7-3. Figure 7-3 ECC500 login page Step 4 Choose System Settings > IP Address Settings. Change the IP address, subnet mask, and default gateway for the ECC500 based on the planned parameters, as shown in Figure 7-4. Issue 05 (2020-03-16)

  • Page 118: How Can I Change The Ecc500 Lui Password

    Step 4 Press to move the cursor to Change Password and press Remember the new password because it is necessary for ECC500 commissioning and maintenance. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 119: How Can I Change The Ecc500 Webui Password

    7.7 How Can I Change the ECC500 WebUI Password? Prerequisites  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch.  You have obtained the ECC500 IP address as well as the user name and password for WebUI login.

  • Page 120: How Can I Create A User

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context The Administrator, Engineer, and Operator user groups are optional on the user management page, and they have different operation rights.
  • Page 121 ECC500 User Manual 7 FAQ Procedure Step 1 Log in to the ECC500 WebUI as an administrator. Step 2 Choose Maintenance > User Management. Step 3 Click Add, as shown in Figure 7-7. Figure 7-7 Adding an ECC500 user _01...

  • Page 122: How Can I Set The Date And Time

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 123: How Can I Handle Alarms

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 124: How Should I Link An Ai/Di Alarm To A Do Port

    This section describes how to link the alarm generated from the AI/DI_1 port on the MUE05A expansion card to the SLOT1_DO port. Procedure Step 1 Log in to the ECC500 WebUI. Step 2 Choose Monitoring > MUE05A Expansion Card > MUE05A4 > Running Parameter > AI/DI_1 Port Settings.
  • Page 125 Submit.  SLOT1_DO (new page) or DO1 (old page) represents that the MUE05A expansion card where the DO port is located is installed in slot 1 of the ECC500.  DO_1 represents the DO_1 port on the GPRS expansion card.

  • Page 126: How Can I Change The System Site Name

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context Site network fault alarms are sent to the specified mobile phone numbers of maintenance engineers through SMS.

  • Page 127: How Can I Change The Device Name

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...

  • Page 128: How Can I Set Temperature And Humidity Alarm Thresholds For A T/H Sensor

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 129: How Can I Change Fan Alarm Thresholds And Reset A Fan

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context A fan can be automatically identified.
  • Page 130 The following describes how to modify parameters, using fan 1 as an example. Procedure Step 1 Log in to the ECC500 WebUI. Step 2 Choose Monitoring > FAN Group > FAN1 > Running Parameter. Modify High Temperature Alarm Thres and Low Temperature Alarm Thres.

  • Page 131: How Can I Delete A Device Failing In Communication Or Restart The Ecc500

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Context ...

  • Page 132: How Can I View Performance Data

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 133: How Can I View Operation Logs

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 134: How Can I Export Data

    You have obtained the ECC500 IP address as well as the user name and password for WebUI login.  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.

  • Page 135: How Can I Restore Factory Settings

    User Manual 7 FAQ  You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch. Procedure Step 1 Log in to the ECC500 WebUI.
  • Page 136 System Site Name in System Settings > Site Settings  Video Info List parameters in Maintenance > View Video Procedure Step 1 Log in to the ECC500 WebUI. Step 2 Choose Maintenance > Configuration File and click Restore Factory Settings, as shown in Figure 7-25.

  • Page 137: A Technical Specifications

    ECC500 User Manual A Technical Specifications Technical Specifications Table A-1 describes the technical specifications of the ECC500. Table A-1 Technical specifications of the ECC500 Category Item Specifications –20° C to +65° C Environmental Operating temperature requirements –40° C to +70° C...
  • Page 138 The monitoring module certification components and PCB comply with regulatory requirements of the IEC60950-1 or EN60950-1. Mechanical Dimensions (H x W x D) 44.5 mm x 175 mm x 100 mm specifications Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 139: B Devices Managed By The Ecc500

    ECC500 User Manual B Devices Managed by the ECC500 Devices Managed by the ECC500 Table B-1 lists the devices managed on the ECC500 WebUI. Table B-1 Device list Device Type Port Type Device Software Device Model Version UPS2000-G RS485 UPS2000-G-A: ...
  • Page 140 Dry contact Audible and visual alarm  a: If the NetCol5000-A does not use ACC V100R001C30, contact Huawei technical support.  b: If the NetCol8000-A does not use ACC V100R001C20SPC500, contact Huawei technical support. Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

  • Page 141: C Acronyms And Abbreviations

    C Acronyms and Abbreviations Acronyms and Abbreviations analog input Automatic Transfer Switch digital input digital output Energy Control Center Fast Ethernet Internet Protocol Liquid Crystal Display LCD user interface Management Information Base Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.
  • Page 142 ECC500 User Manual C Acronyms and Abbreviations power distribution unit Simple Network Management Protocol SNMP uninterruptible power system Issue 05 (2020-03-16) Copyright © Huawei Technologies Co., Ltd.

Table of Contents