Page 4
25UB55 29UB55 Stand Base One Screw Cable Holder 25UM55 Screw Cover Screws Stand Base Stand Body 29UM55 Screw Cover Screws Stand Base Stand Body...
Page 5
25UM55 Power Indicator On: power is on Off: power is off (Power Button)
Page 6
29UM55 Power Indicator On: power is on Off: power is off (Power Button) Ports...
Page 8
Power Indicator On: power is on Off: power is off (Power Button) Ports...
Installing the Monitor Assembling the stand base Attach the screw cover. 25UM55 Place the screen face down. CAUTION To protect the screen from scratches, cover the surface with a soft cloth. Check the direction of the stand body (front,back) and then mount the stand body Screw Cover onto the stand hinge.
Page 11
Attach the Stand Base to Stand Body. 29UM55 Tighten the screw to the right. Place the screen face down. CAUTION To protect the screen from scratches, cover Stand Body the surface with a soft cloth. Check the direction of the stand body (front,back) and then mount the stand body onto the stand hinge.
Page 12
5 B5 Check the position (at the front and rear) of Check the position (at the front and rear) of thestand body , then mount the stand base on the stand body, then mount the stand base on the stand body as shown in the figure. the stand body as shown in the figure.
Page 13
25UB55 25UM55 Fix the Knob (Cable holder) to the Hole(Stand body). Use one screw to fix the Cable Holder and monitor set. Close the Cable holder. 29UM55 29UB55 Fix the Knob (Cable holder) to the Hole(Stand body). Use one screw to fix the Cable Holder and monitor set.
Detaching the stand base Remove the two screws on the back of stand 25UM55 body. As shown in the illustration, disconnect the Place the screen face down. stand body from the stand hinge. Screws CAUTION To protect the screen from scratches, cover the surface with a soft cloth.
Page 15
29UM55 Turn the screw to the left. Place the screen face down. Pull out the Stand Base. CAUTION To protect the screen from scratches, cover Stand Body the surface with a soft cloth. Remove the screw cover. Screw cover Stand Base emove the two screws on the back of stand body.
Place the monitor's screen face down.To protect the screen from scratches, cover the surface with a soft cloth. Using a screwdriver, remove the four screws and detach the stand from the monitor. 25UM55 29UM55 10 cm 10 cm 10 cm 10 cm Place the monitor's screen face down.To...
Place the monitor in an upright position, mount- 25UB55 ed on the stand base. Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience. 25UM55 Front Side Rear Side 29UB55 Rear Side Front Side...
Page 21
To avoid injury to the fingers when adjusting Be careful not to touch or press the screen the screen, do not hold the lower part of the area when adjusting the angle of the monitor. monitor's frame as illustrated below. 25UM55 29UM55 25UM55 29UM55 29UB55...
Page 24
M4 x 10 mm If you use screw longer than standard, the monitor might be damaged internally. If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.
USING THE MONITOR Connecting to a PC CAUTION Connect the input signal cable This monitor supports the *Plug and Play turn in the direction of the arrow. feature. To prevent disconnection secure *Plug and Play: A feature that allows you to the cable tightly.
PC to the monitor. Connect your PC to the monitor using the display port cable as illustrated below. Press the menu button and then select the input option from the input menu. 25UM55 (sold separately) 29UB55 (sold separately) 29UM55...
PC and A/V devices to the monitor .Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. 25UM55 29UB55 29UM55 NOTE HDMI PC may cause device compatibility issues.
PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. 25UM55 29UB55 29UM55 NOTE Using a DVI to HDMI cable may cause com-...
Page 37
-Settings To view the navigation OSD, press the Power button center( Jog Power button left ( ) to go to Menu OSD . Jog the power button up( ) or down( ) to go to Settings. Automatic Standby Press Power button center ( ) or Jog Power button right ( to select Settings.
Page 44
29UM55 2.0 A ADS-45SN-19-3 19040G type, SHENZHEN HONOR ELECTRONIC CO.,LTD Or LCAP21B, type, LIEN CHANG ELECTRONIC ENTERPRISE production. Output: 19 V 2.1 A 70.3 cm x 41.4 cm x 21.3 cm 70.3 cm x 32.8 cm x 6.4 cm...
Page 45
29UB55 2.0 A ADS-45SN-19-3 19040G type, SHENZHEN HONOR ELECTRONIC CO.,LTD Or LCAP21B, type, LIEN CHANG ELECTRONIC ENTERPRISE production. Output: 19 V 2.1 A 70.3 cm x 37.7 cm x 25.9 cm 70.3 cm x 32.8 cm x 4.3 cm 6.5 kg...
Page 48
Declaration of Conformity Trade Name: LG Model : 25UM55D, 25UB55D 29UM55D, 29UB55D Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory...