Page 1
AIR CONDITIONER OPERATING MANUAL CEILING TYPE BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUALE DI ISTRUZIONI ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ MANUAL DE FUNCIONAMENTO РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ KULLANIM KILAVUZU KEEP THIS MANUAL FOR FUTURE REFERENCE BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE CONSERVE ESTE MANUAL PARA FUTURA REFERENCIA CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI ΦΥΛΑΞΤΕ...
FEATURES AND FUNCTIONS ■ Energy saving and comfortable function 10 °C HEAT OPERATION INVERTER The room temperature can be maintained at 10°C so as to prevent the room temperature from falling too far. At the start of operation, large amount of power is used to bring the room quickly to the desired temperature.
FEATURES AND FUNCTIONS ■ Remote controller [The additional functions for wired remote controller] • Weekly Timer • Temperature Set Back Timer WIRELESS REMOTE CONTROLLER And you can use both wired remote controller and wireless remote controller simultaneously. The wireless remote controller allows convenient control of air (But function is limited) conditioner operation.
Page 5
NAME OF PARTS Remote controller Display panel Display panel To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actual operation, however, the display will only show those indicators appropriate to the current operation. 1 “MODE” button F Signal transmitter 2 “10 °C HEAT”...
PREPARATION Turn on the power WARNING ● Take care to prevent infants and young children from accidentally swallowing the Turn on the circuit breaker. batteries. CAUTION Load batteries (AAA/R03/LR03 2) ● To prevent malfunction or damage of the remote controller: - Place remote controller at where will not Press and slide the battery compartment lid on the be exposed to direct sunlight or excessive...
OPERATION To select the operating mode Press the “START/STOP” button. The indoor unit’s Operation indicator lamp (green) will light. The air conditioner will start operating. Press the “MODE” button to select the desired mode. Each time the button is pressed, the mode will change in the following order. [AUTO] [COOL] [DRY]...
Page 8
OPERATION Instructions relating to heating (*) are applicable only to Heating and Cooling model (Reverse Cycle). To stop operation Press the “START/STOP” button. The Operation indicator lamp (green) will go out. Operating mode [AUTO] (in Cooling model): ● When the Auto mode (automatic changeover) operation is selected, the fan will operate at very low speed for about a few minutes, during which time the indoor unit detects the room conditions and selects the proper mode.
TIMER OPERATION Before using the timer operation, be sure that the remote controller is set to the correct current time ( ☞ P. 5). If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the timer. NOTES: In simultaneous multi connection, this function by using the wireless remote controller cannot be used.
SLEEP TIMER OPERATION Unlike other timer functions, the Sleep Timer is used to set the length of time until air conditioner operate is stopped. If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the Sleep Timer. NOTES: In simultaneous multi connection, this function by using the wireless remote controller cannot be used.
ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating (*) are applicable only to Heating and Cooling model (Reverse Cycle). Adjust the up, down, left and right air directions with the “SET” buttons on the remote controller. ● Use the “SET” buttons after the indoor unit has started operating and the air direction louvers have stopped moving. ●...
SWING OPERATION Begin air conditioner operation before performing this procedure. To select Swing operation Press the “SWING” button. Each time the “SWING” button is pressed, the Swing operation will change in the following order. Up/down Swing operation Left/right Swing operation Swing operation stops Up/down/left/right Swing operation To stop Swing operation...
10 °C HEAT OPERATION NOTES: In simultaneous multi connection, this function by using the wireless remote controller cannot be used. To use 10 °C Heat operation While the 10 °C Heat operation is in progress, only the following operation can be used. Press the “10 °C HEAT”...
CLEANING AND CARE Before cleaning this product, be sure to turn it off and disconnect all the power supply. ● The fan operates at high speed inside the unit, and could result in personal injury. ● CAUTION Be careful not to drop the intake grille. ●...
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to Heating and Cooling model (Reverse Cycle). In following events, immediately stop operation of the air conditioner, and disconnect all the power WARNING supply by turning off the electrical breaker or disconnecting the power plug. Then consult your dealer or authorized service personnel.
TROUBLESHOOTING Symptom Problem See page Check once Does not operate at all: ● Has the circuit breaker been turned off ? more ● Has there been a power failure? — Has a fuse blown out, or a circuit breaker been tripped? ●...
Page 17
OPERATING TIPS The wired remote controller option is required to use the following function (**). **Dual remote controllers (optional) An additional remote controller can be added up to the maximum of 2 remote controllers. Either remote controller can control the air conditioner.