hit counter code
Sony CCD-TRV65 Operating Instructions (primary manual) Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. CCD-TRV65 Operating Instructions (primary...
  6. Operating instructions manual

Sony CCD-TRV65 Operating Instructions (primary manual) Operating Instructions Manual

Video camera recorder
Hide thumbs Also See for CCD-TRV65 Operating Instructions (primary manual):
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Video Camera
Recorder

Operating Instructions

Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner's Record
The model and serial numbers are located on the bottom. Record the serial
number in the space provided below. Refer to these numbers whenever you
call upon your Sony dealer regarding this product.
Model No. CCD-TRV
Serial No.
CCD-TRV65/TRV615
CCD-TRV15/TRV25/TRV35/
TRV215/TRV315
©1998 by Sony Corporation
Model No. AC-L
Serial No.
CCD-TRV65
3-861-901-14 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony CCD-TRV65 Operating Instructions (primary manual)

Summary of Contents for Sony CCD-TRV65 Operating Instructions (primary manual)

  • Page 1: Operating Instructions

    Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CCD-TRV Serial No.
  • Page 2 Congratulations on your purchase of this Sony Handycam Vision Handycam Vision, you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come.

  • Page 3: Table Of Contents

    Table of contents Before you begin Using this manual ... 4 Checking supplied accessories ... 6 Getting started Installing and charging the battery pack ... 7 Inserting a cassette ... 12 Basic operations Camera recording ... 13 Using the zoom feature ... 15 Selecting the START/STOP mode ...

  • Page 4: Before You Begin Using This Manual

    Before you begin Using this manual The instructions in this manual are for the seven models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The CCD-TRV65 is the model used for illustration purposes.

  • Page 5: Precautions On Camcorder Care

    Using this manual Note on TV color systems TV color systems differ from country to country. To view your recordings on a TV, you need an NTSC system-based TV. Precaution on copyright Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws.

  • Page 6: Checking Supplied Accessories

    Checking supplied accessories Check that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (1) (p. 84) 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 8, 26) 3 NP-F330 Battery pack (1) (p. 7, 26) 4 CR2025 Lithium Battery (1) (p.

  • Page 7: Getting Started

    Before using your camcorder, you first need to install and charge the battery pack. This camcorder operates only with the “InfoLITHIUM” battery. “InfoLITHIUM” is a trademark of Sony Corporation. Installing the battery pack (1) While pressing BATT RELEASE, slide the battery terminal cover in the direction of the arrow.

  • Page 8: Installing And Charging The Battery Pack

    Installing and charging the battery pack Charging the battery pack Charge the battery pack on a flat surface without vibration. The battery pack is charged a little in the factory. (1) Open the DC IN jack cover and connect the supplied AC power adaptor to the DC IN jack with the plug’s 4 mark up.
  • Page 9 Installing and charging the battery pack Charging time Battery NP-F330 pack (supplied) Charging time* (min.) (90) The time required for a normal charge is indicated in parentheses. * Approximate minutes to charge an empty battery pack using the supplied AC power adaptor.

  • Page 10: Installing And Charging The Battery Pack

    Installing and charging the battery pack CCD-TRV65/TRV615 Battery pack Continuous recording time* Typical recording time** Playing time on Numbers in parentheses indicate the time when you use a normally charged battery. Battery life will be shorter if you use the camcorder in a cold environment. * Approximate continuous recording time at 77°F (25°C).

  • Page 11: Installing And Charging The Battery Pack

    Installing and charging the battery pack To remove the battery pack While pressing BATT RELEASE, slide the battery pack in the direction of the arrow. BATT RELEASE You can look at the demonstration of the functions available with this camcorder (p. 32).

  • Page 12: Inserting A Cassette

    Inserting a cassette Make sure that the power source is installed. When you want to record in the Hi8 system, use Hi8 video cassette H.(CCD-TRV65/TRV615 only) (1) While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow.

  • Page 13: Basic Operations Camera Recording

    Basic operations Camera recording Make sure that the power source is installed and a cassette is inserted and that the START/STOP MODE switch inside the LCD panel is set to time events, you may want to make a trial recording to make sure that the camcorder is working correctly.

  • Page 14: To Focus The Viewfinder Lens

    Camera recording Note There is a little wear on the battery pack which is installed with the camcorder. However, for getting remaining battery time indicated correctly, leave the battery pack installed after use. To focus the viewfinder lens If you cannot see the indicators in the viewfinder clearly, or after someone else has used the camcorder, focus the viewfinder lens.

  • Page 15: Using The Zoom Feature

    Camera recording Using the zoom feature Zooming is a recording technique that lets you change the size of the subject in the scene. For more professional-looking recordings, use the zoom function sparingly. “T” side: for telephoto (subject appears closer) “W” side: for wide-angle (subject appears farther away) Zooming speed (Variable speed zooming) Move the power zoom lever a little for a slower zoom, move it further for a faster zoom.

  • Page 16: Selecting The Start/Stop Mode

    Camera recording Selecting the START/STOP mode Your camcorder has three modes. These modes enable you to take a series of quick shots resulting in a lively video. (1) While pressing OPEN, open the LCD panel. (2) Set START/STOP MODE to the desired mode. : Recording starts when you press START/STOP, and stops when you press it again (normal mode).

  • Page 17: Shooting With The Lcd Screen

    Camera recording Shooting with the LCD screen You can also record the picture while looking at the LCD screen. When using the LCD screen, the viewfinder turns off automatically. You cannot monitor the sound from the speaker during recording. (1) While pressing OPEN, open the LCD panel. (2) Adjust the angle of the LCD panel.

  • Page 18: Letting The Subject Monitor The Shot (Mirror Mode)

    Camera recording Notes on the LCD panel •When closing the LCD panel, turn it vertically until it clicks [a]. •When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may be damaged or the LCD panel may not close properly [b]. •Close the LCD panel completely when not in use.

  • Page 19: Hints For Better Shooting

    Hints for better shooting For hand-held shots, you’ll get better results by holding the camcorder according to the following suggestions: •Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb. •Place your right elbow against your side.
  • Page 20 When attaching a non-Sony tripod, make sure that the length of the tripod screw is less than 9/32 inch (6.5 mm). Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder.

  • Page 21: Checking The Recorded Picture

    Checking the recorded picture Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder or on the LCD screen. (1) While pressing the small green button on the POWER switch, set it to CAMERA.

  • Page 22: Playing Back A Tape

    Playing back a tape You can monitor the playback picture on the LCD screen. (1) While pressing the small green button on the POWER switch, set it to VTR (CCD-TRV65/TRV615) or PLAYER (CCD-TRV15/TRV25/TRV35/TRV215/ TRV315). The video control buttons light up (CCD-TRV35/TRV65/TRV315/ TRV615 only).
  • Page 23 Playing back a tape When monitoring on the LCD screen You can turn the LCD panel over and move back to the camcorder with the LCD screen facing out [a]. You can adjust the angle of the LCD screen by turning the LCD screen up to 15 degrees [b].

  • Page 24: Various Playback Modes

    Playing back a tape Various playback modes You can enjoy clear pictures on the LCD screen during still, slow and picture search. (Crystal-clear still/slow/picture search) To view a still picture (playback pause) Press P during playback. To resume playback, press P or (. To locate a scene (picture search) Keep pressing 0 or ) during playback.

  • Page 25: Searching For The End Of The Picture

    Searching for the end of the picture You can go to the end of the recorded portion after you record and play back the tape to make the transition between the last scene you recorded and the next scene smooth. The tape starts rewinding or fast-forwarding and the last 5 seconds (10 seconds in LP mode) of the recorded portion play back.

  • Page 26: Advanced Operations Using Alternative Power Sources

    Supplied AC power adaptor Battery pack Battery pack NP-F330 (supplied), NP-F530, NP-F550, NP-F730, NP-F730H, NP-F750, NP-F930, NP-F950 Size AA (LR6) Supplied battery case (CCD-TRV15/TRV25/ Alkaline battery TRV35/TRV65 only) 12 V or 24 V car battery Sony car battery charger DC-V515A 2, 3...

  • Page 27: Using Alkaline Batteries

    Using alternative power sources Using alkaline batteries – CCD-TRV15/TRV25/TRV35/TRV65 only Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not supplied). (1) Remove the battery holder from the battery case. (2) Insert six new alkaline batteries into the battery holder, following the marking on the holder to be sure the batteries are installed in the correct direction.

  • Page 28: Using A Car Battery

    Using alternative power sources Using a car battery Use Sony DC-V515A car battery charger (not supplied). Connect the car battery cord to the cigarette lighter socket of a car (12 V or 24 V). Refer to the operating instructions of your car battery charger.

  • Page 29: Changing The Mode Settings

    Changing the mode settings You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder. (1) Press MENU to display the menu. (2) Turn the control dial to select the desired icon in the left side of the menu, then press the dial.

  • Page 30: Selecting The Mode Setting Of Each Item

    •Select ON to always display the remaining tape indicator. AUTO TV ON* <ON/OFF> (CCD-TRV35/TRV65/TRV315/TRV615 only) You can use this feature only with Sony TVs. •Select ON to turn on the TV automatically when using the LASER LINK function. •Select OFF not to turn on the TV.
  • Page 31 Changing the mode settings BEEP* <ON/OFF> •Select ON so that beeps sound when you start/stop recording, etc. •Select OFF when you do not want to hear the beep sound. COMMANDER <ON/OFF> •Select ON when using the supplied Remote Commander for the camcorder. •Select OFF when not using the Remote Commander.
  • Page 32 Changing the mode settings ORC TO SET* Select this item to automatically adjust the recording condition to get the best possible recording. If you have already performed this function, “ORC ON” is displayed. CLOCK SET* Reset the date or time. AUTO DATE* <ON/OFF>...
  • Page 33 Changing the mode settings Items for VTR/PLAYER mode only HiFi SOUND <STEREO/1/2> (CCD-TRV65/TRV615 only) •Normally select STEREO. •Select 1 or 2 to play back a dual sound track tape. EDIT <ON/OFF> •Select ON to minimize picture deterioration when editing. •Normally select OFF. TBC* <ON/OFF>...

  • Page 34: Shooting With Backlighting

    Shooting with backlighting When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears in the viewfinder or on the LCD screen. [a] Subject is too dark because of backlight.

  • Page 35: Using The Fader Function (Ccd-Trv35/Trv65/Trv315/ Trv615 Only)

    Using the FADER function – CCD-TRV35/TRV65/TRV315/TRV615 only Selecting the fader function You can fade in or out to give your recording a professional appearance. When the picture fades in, the sound gradually increases. When the picture fades out, the sound gradually decreases. STBY FADER M.FADER...
  • Page 36 Using the FADER function Using the fader function When fading in [a] (1) While the camcorder is in Standby mode, press FADER until the desired fade indicator flashes. (2) Press START/STOP to start recording. The fade indicator stops flashing. When fading out [b] (1) During recording, press FADER until the desired fade indicator flashes.

  • Page 37: Shooting In The Dark (Nightshot)

    Shooting in the dark (NightShot) – CCD-TRV35/TRV65/TRV315/TRV615 only The NightShot function enables you to shoot a subject in a dark place. You can achieve a satisfactory recording of the ecology of nocturnal animals for observation with this function. This function may record picture nearly in monochrome. (1) While the camcorder is in Standby mode, slide NIGHTSHOT to ON.

  • Page 38: Using The Wide Mode Function

    Using the wide mode function Selecting the desired mode You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 FULL). CINEMA CINEMA 16:9 FULL 16:9 FULL CINEMA Black bands appear at the top and the bottom of the screen, and the viewfinder or LCD screen [a] and a normal TV screen [b] look wide.
  • Page 39 Using the wide mode function Using the wide mode function You can select the wide mode (OFF, CINEMA, 16:9FULL) in the menu system (p. 29). To cancel wide mode Select OFF in the menu system. To watch the tape recorded in wide mode To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen TV to zoom mode.

  • Page 40: Using The Program Ae Function

    Using the PROGRAM AE function Selecting the best mode You can select one of six PROGRAM AE (Auto Exposure) modes to suit your shooting situation, referring to the following. Spotlight mode For subjects in spotlight, such as at the theater or a formal event. a Soft Portrait mode For zooming in on a still subject in telephoto mode, or for a subject behind an obstacle such as a screen.
  • Page 41 Using the PROGRAM AE function Using the PROGRAM AE function (1) Press PROGRAM AE. (2) Turn the control dial to select the desired PROGRAM AE mode. PROGRAM To turn off program AE Press PROGRAM AE. Notes on focus setting •In the Spotlight, Sports lesson and Beach & Ski modes, you cannot take close-ups because the camcorder is set to focus only on subjects in the middle to far distance.

  • Page 42: Focusing Manually (Ccd-Trv35/ Trv65/Trv315/Trv615 Only)

    Focusing manually – CCD-TRV35/TRV65/TRV315/TRV615 only When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. • Insufficient light [a] • Subjects with little contrast - walls, sky, etc. [b] • Too much brightness behind the subject [c] •...
  • Page 43 Focusing manually Focusing manually When focusing manually, first focus in telephoto before recording, and then reset the shot length. (1) Set FOCUS to MANUAL. The f indicator appears in the viewfinder or on the LCD screen. (2) Move the power zoom lever to the end of the “T” side in the optical zoom zone.

  • Page 44: Enjoying Picture Effect

    Enjoying picture effect Selecting picture effect You can make pictures like those of television with the Picture Effect function. PASTEL [a] The contrast of the picture is emphasized, and the picture looks like an animated cartoon. NEG. ART [b] The color and brightness of the picture is reversed. SEPIA The picture is sepia.

  • Page 45: Using Picture Effect Function

    Enjoying picture effect Using picture effect function (1) Press PICTURE EFFECT. (2) Turn the control dial to select the desired picture effect mode. PICTURE EFFECT PASTEL NEG. ART SEPIA B & W SOLARIZE MOSAIC SLIM STRETCH To turn off picture effect Press PICTURE EFFECT.

  • Page 46: Adjusting The Exposure (Ccd-Trv35/ Trv65/Trv315/Trv615 Only)

    Adjusting the exposure – CCD-TRV35/TRV65/TRV315/TRV615 only When to adjust the exposure Adjust the exposure manually under the following cases. • The background is too bright (back lighting) • Insufficient light: most of the picture is dark • Bright subject and dark background •...
  • Page 47 Adjusting the exposure Shooting with the sun behind you If the light source is behind your subject, or in the following situations, the subject will be recorded too dark. •The subject is indoors and there is a window behind the subject. •Bright light sources are included in the scene.

  • Page 48: Superimposing A Title

    Superimposing a title You can select one of eight preset titles and two custom titles. You can also select the language, color, size and position of titles. Superimposing titles (1) Press TITLE to display the title menu. (2) Turn the control dial to select (3) Turn the control dial to select the desired title, then press the dial.
  • Page 49 Superimposing a title To superimpose the title from beginning After step 7, press START/STOP to start recording. To superimpose the title while you are recording After pressing START/STOP to start recording, start from step 1. In this case, beep is not heard.

  • Page 50: Making Your Own Titles

    Making your own titles You can make up to two titles and store them in the camcorder. We recommend to set the POWER switch to VTR/PLAYER or eject the cassette before you begin. Your title can have up to 20 characters. (1) Press TITLE to display the title menu.

  • Page 51: Recording With The Date/Time

    Making your own titles To edit a title you have stored In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. Note You can not enter over 20 characters title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically.

  • Page 52: Optimizing The Recording Condition

    Optimizing the recording condition Use this feature to check the tape condition before recording, so that you can get the best possible picture (ORC). (1) While the camcorder is in Standby mode, press MENU to display the menu. (2) Turn the control dial to select Ò, then press the dial. (3) Turn the control dial to select ORC TO SET, then press the dial.

  • Page 53: Releasing The Steady Shot Function (Ccd-Trv25/Trv35/Trv65/ Trv215/Trv315/Trv615 Only)

    Releasing the STEADY SHOT function – CCD-TRV25/TRV35/TRV65/TRV215/TRV315/TRV615 only When the Steady Shot function is working, the camcorder compensates for camera- shake. You can release the Steady Shot function when you do not need to use the Steady Shot function. The “ ”...

  • Page 54: Watching On A Tv Screen

    Watching on a TV screen Connect the camcorder to your TV or VCR to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use house current for the power source. While playing back on a TV screen, close the LCD panel.
  • Page 55 Watching on a TV screen CCD-TRV65/TRV615 S VIDEO VIDEO AUDIO : Signal flow – CCD-TRV65/TRV615 only If your TV or VCR has an S video jack, connect using the S video cable (not supplied) [a] to obtain a high quality picture . If you are going to connect the camcorder using the S video cable (not supplied) [a], you do not need to connect the yellow (video) plug of the A/V connecting cable [b].
  • Page 56 LASER LINK is a system which transmits and receives a picture and sound between video equipment having the LASER LINK is a trademark of Sony Corporation. To play back on a TV (1) After connecting your TV and AV cordless IR receiver, set the POWER switch on the AV cordless IR receiver to ON.

  • Page 57: Editing Onto Another Tape

    Editing onto another tape You can create your own video program by editing with any other h 8 mm, H Hi8, j VHS, k S-VHS, VCR that has video/audio inputs. Before editing Connect the camcorder to the VCR using the supplied A/V connecting cable. Set the input selector on the VCR to LINE, if available.

  • Page 58: Recording From A Vcr Or Tv (Ccd-Trv65/Trv615 Only)

    Recording from a VCR or TV –CCD-TRV65/TRV615 only You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Connect the camcorder to the VCR or TV using the supplied A/V cable. Turn down the volume of the camcorder while editing.

  • Page 59: Additional Information Changing The Lithium Battery In The Camcorder

    I indicator flashes in the viewfinder for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
  • Page 60 Changing the lithium battery in the camcorder Changing the lithium battery When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise, you will need to reset the date, time and other items in the menu system retained by the lithium battery.

  • Page 61: Resetting The Date And Time

    Resetting the date and time You can reset the date and time in the menu system. (1) While the camcorder is in Standby mode, press MENU to display the menu. (2) Turn the control dial to select (3) Turn the control dial to select CLOCK SET, then press the dial. (4) Turn the control dial to adjust the desired year, then press the dial.

  • Page 62: Simple Setting Of Clock By Time Difference

    Simple setting of clock by time difference You can easily set the clock for a local time by a time difference in the menu system. (1) While the camcorder is the standby mode, press MENU to display the menu. (2) Turn the control dial to select (3) Turn the control dial to select WORLD TIME, then press the dial.

  • Page 63: Usable Cassettes And Playback Modes

    Usable cassettes and playback modes Selecting cassette types – CCD-TRV65/TRV615 only This Hi8 system is an extension of the standard 8 mm system, and was developed to realize higher picture quality. You can use either Hi8 or standard 8 mm video cassette for this camera. When you use a Hi8 video cassette, the recording is made in the Hi8 system.

  • Page 64: Tips For Using The Battery Pack

    Tips for using the battery pack This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned.
  • Page 65 Tips for using the battery pack Notes on the rechargeable battery pack Caution Never leave the battery pack in temperatures above 140°F (60°C), such as in a car parked in the sun or under direct sunlight. The battery pack heats up During charging or recording, the battery pack heats up.
  • Page 66 Notes on the “InfoLITHIUM” battery pack What is “InfoLITHIUM” The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with compatible video equipment about its battery consumption. Sony recommends that you use the “InfoLITHIUM” battery pack with video equipment having the mark.

  • Page 67: Maintenance Information And Precautions

    •Use only with alkaline batteries. You cannot use the battery case with manganese batteries or size AA (LR6) rechargeable NiCd batteries. •Using with Sony alkaline batteries is preferable. •Battery life is remarkably shorter in a cold environment (lower than 50°F/10°C).

  • Page 68: Video Head Cleaning

    Do not use a commercially available wet-type cleaning cassette. It may damage the video heads. Note If the Sony V8-25CLH/V8-25CLD cleaning cassette is not available in your area, consult your nearest Sony dealer. CLEANING CASSETTE” message appear one after another or...
  • Page 69 Maintenance information and precautions Removing dust from inside the viewfinder (1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob, turn the eyecup in the direction of the arrow and pull it out. (2) Clean the surface with a commercially available blower. To reattach the eyecup (1) Align the groove on the eyecup with the •...
  • Page 70 •For DC or AC operation, use the accessories recommended in this manual. •Should any solid object or liquid get inside the casing, unplug the camcorder and have it checked by a Sony dealer before operating it any further. •Avoid rough handling or mechanical shock. Be particularly careful of the lens.
  • Page 71 •If you touch the liquid, wash it off with water. •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.

  • Page 72: Using Your Camcorder Abroad

    Using your camcorder abroad Each country or area has its own electric and TV color systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz.

  • Page 73: Trouble Check

    Trouble check If you run into any problem using the camcorder, use the following table to troubleshoot the problem. Should the difficulty persist, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. Camcorder Power Symptom The power is not on.
  • Page 74 Trouble check Symptom Recording stops in a few seconds. The cassette cannot be removed from the holder. { and 6 indicators flash and no function except for cassette ejection works. The date or time indicator is flashing. The tape does not move when a video control button is pressed.
  • Page 75 • EDIT is set to ON in the menu system. m Set it to OFF. (p. 33) • The video heads may be dirty. m Clean the heads using the Sony V8-25CLH/V8-25CLD cleaning cassette (not supplied). (p. 68) • The LCD panel is open.

  • Page 76: Self-Diagnosis Display

    Five-digit display C:21:ππ C:22:ππ C:23:ππ C:31:ππ C:32:ππ E:61:ππ E:62:ππ If you are unable to resolve the problem, contact your Sony dealer or local authorized Sony service facility. LCD screen Self-diagnosis display •C:ππ:ππ You can service the camcorder yourself. •E:ππ:ππ Contact your Sony dealer or local authorized Sony facilitiy.

  • Page 77: Specifications

    Specifications Video camera recorder System Video recording system CCD-TRV65/TRV615: 4 rotary heads (SP/LP independent heads) CCD-TRV15/TRV25/TRV35/ TRV215/TRV315: 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal NTSC color, EIA standards Usable cassette 8mm video format cassette CCD-TRV15/TRV25/TRV35/ TRV215/TRV315: Standard 8...
  • Page 78 Specifications General Power requirements 7.2 V (battery pack) 8.4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using CCD-TRV15: 3.1 W CCD-TRV25/TRV35/TRV215/ TRV315: 3.2 W CCD-TRV65/TRV615: 3.3 W Viewfinder CCD-TRV15: 2.5 W CCD-TRV25/TRV35/TRV215/ TRV315: 2.6 W CCD-TRV65/TRV615: 2.7 W Operating temperature...

  • Page 79: Identifying The Parts

    Identifying the parts 1 EDITSEARCH button (p. 21) 2 LASER LINK button (CCD-TRV35/ TRV65/TRV315/TRV615 only) (p. 56) 3 Intelligent accessory shoe (CCD-TRV65/TRV615 only) (p. 80) / Accessory shoe (CCD-TRV35/TRV315 only) 4 Lens cover 5 POWER switch (p. 13) 6 FOCUS switch (CCD-TRV35/TRV65/ TRV315/TRV615 only) (p.
  • Page 80 Identifying the parts !¢ !∞ !§ !¶ !• !ª @º @¡ !¢ Viewfinder (p. 14) !∞ Speaker (p. 23) !§ LCD screen (p. 17) !¶ LCD BRIGHT buttons (p. 17) !• OPEN button (p. 16) !ª VOLUME buttons (p. 22) @º...
  • Page 81 Identifying the parts @ª #º #¡ #™ #£ #¢ #∞ @ª COUNTER RESET button (p. 14) #º TIME button (p. 51) #¡ DATE button (p. 51) #™ DISPLAY button (p. 23) #£ TITLE button (p. 48) #¢ END SEARCH button (p. 25) #∞...
  • Page 82 Identifying the parts $™ $£ $¢ $∞ $§ $¶ $™ Eyecup RELEASE knob (p. 69) $£ EJECT switch (p. 12) $¢ LANC l control jack l stands for Local Application Control Bus System. The l control jack is used for controlling the tape transport of video equipment and peripherals connected to it.
  • Page 83 Identifying the parts %™ %™ MIC jack (PLUG IN POWER) Connect an external microphone (not supplied). This jack also accepts a “plug-in-power” microphone. %£ Camera recording/battery lamp (p. 13) %¢ LASER LINK emitter (CCD-TRV35/ TRV65/TRV315/TRV615 only) (p. 56)/ NightShot Light emitter (CCD-TRV35/ TRV65/TRV315/TRV615 only) (p.

  • Page 84: Remote Commander

    • This camcorder works in commander mode VTR 2. The commander modes (1, 2 and 3) are used to distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in commander mode VTR 2, we recommend you change the commander mode or cover the remote sensor of the VCR with black paper.

  • Page 85: Attaching The Shoulder Strap

    Identifying the parts To prepare the Remote Commander Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Note on battery life The batteries for the Remote Commander last about 6 months under normal operation. When the batteries become weak or dead, the Remote Commander does not work.
  • Page 86 Identifying the parts Operation indicators Viewfinder M.FADER CINEMA SEPIA „ !¡ !™ !£ 1 Recording mode indicator (p. 30)/ Mirror mode indicator (p. 18) 2 Playing back or recording in Hi8 format (CCD-TRV65/TRV615 only) (p. 63) 3 Remaining battery time indicator 4 Exposure indicator (CCD-TRV35/ TRV65/TRV315/TRV615 only) (p.

  • Page 87: Warning Indicators

    8 Some other trouble has occurred. Use the self-diagnosis function (p. 76). If the display does not disappear contact your Sony dealer or local authorized Sony service facility. 9 The lithium battery is weak or is not installed. 0 You tried to record a picture that has a copyright control signal.

  • Page 88: Index

    EDITSEARCH ... 21 END SEARCH ... 25 Exposure ... 46 F, G, H FADER ... 35 House current ... 26 Sony Corporation Printed in Japan I, J, K, L LANC ... 82 LASER LINK ... 56 Lithium battery ... 59 M, N Manual focus ...

This manual is also suitable for:

Trv15Trv215Trv25Trv35Trv615Ccd-trv615 ... Show all

Table of Contents