Related Manuals for Canon Color Network Printer Expansion Kit-C1
Summary of Contents for Canon Color Network Printer Expansion Kit-C1
- Page 1 Color Network Printer Expansion Kit-C1 Installation Procedure Follow the instructions described below to install the Color Network Printer Expansion Kit-C1 E N G L I S H to copier.
- Page 2 Follow the instructions described below to install the Color Network Printer Expansion Kit-C1 to copier. [1] PDL boot ROM ..........1 pc. [4] Setup guide ..........1 pc. [2] User software CD-ROM ....... 1 pc. [5] User Manual CD-ROM ......... 1 pc.
- Page 3 2) Remove the 7 screws [1], and detach the rear cover [2]. Before starting the work, be sure to perform the following on the host ma- chine in the order indicated: 1. Turn off the control panel power switch. 2. Turn off the main power switch. 3.
- Page 4 4) Push the slot lever [1], and detach the boot ROM 3) Press [network settings]. [2]. 4) As necessary, check and set the following: [TCP/IP settings], [NetWare settings] (indicated for a NetWare model), [AppleTalk settings], and the like. For details, see the User Manual (Net- work Guide).
- Page 5 ecute color adjustment. • If you have connected the reader unit, execute ‘auto gradation correction using the host machine’s ser- vice mode (COPIER>ADJUST>PASCAL). • If the machine is a printer model, connect the CC100, and execute calibration (user operation).
- Page 6 PUB. F-IM-6227-010 PRINTED IN JAPAN/IMPRIME AU JAPON...