Page 1
Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 898 980...
Before using for the first time ................ 17 Settings with the deflector plate retracted ............17 Select Extraction mode or Recirculation mode............. 17 Setting up Miele@home ..................18 Signing off the remote control................ 18 Connecting via the app .................. 18 Connecting via WPS ..................
Page 3
Contents Energy saving tips .................... 40 Cleaning and care .................... 41 Housing ......................... 41 Grease filters ......................42 Charcoal filters ...................... 44 Resetting the charcoal filter operating hours counter ........ 44 Disposing of charcoal filters ................ 44 Remote control...................... 45 Cleaning the remote control ................
They contain important notes on the safety, installation, use and maintenance of the appliance. Miele cannot be held liable for non- compliance with these instructions. Keep these instructions in a safe place and ensure that all users are familiar with the contents.
Page 5
Warning and Safety instructions The cooker hood can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
Page 6
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
Page 7
Miele spare parts. If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger. During installation, maintenance and repair work, the appliance...
Page 8
Warning and Safety instructions Using at the same time as another heating appliance that depends on the air from the room Danger of toxic fumes! Great care should be taken when using the cooker hood in the same room or the same area of the house at the same time as another heating appliance that depends on the air from the room.
Page 9
Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliance from being drawn back into the room, when the cooker hood and the heater are both operated simultaneously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible.
Page 10
Warning and Safety instructions Correct use Never use a naked flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over a naked flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard.
Page 11
Wear gloves to protect your hands from being cut. Exhaust ducting must be of non-inflammable material. Suitable material is available from Miele specialist dealers or the Miele Spares Dept. The appliance must not be connected to a chimney or flue which is in use.
Page 12
Please dispose of them in a designated battery collection and recycling system. Accessories Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the warranty and Miele cannot accept liability.
Old batteries and rechargeable batteries appliances, or contact your dealer or contain important raw materials which Miele for advice. You are also can be recycled. Disposing of batteries responsible (by law, depending on and rechargeable batteries separately...
Page 15
Guide to the appliance a Retractable deflector plate b Controls c Grease filters d Hob lighting e Extraction ducting connection The extraction ducting connection can also be fitted at the back. f Slots for the charcoal filters g Slots for the grease filters h Charcoal filters Special accessories for recirculation mode i Control for switching the lighting on and off and for dimming the lighting...
Modes of operation Depending on the model of the cooker Recirculation mode hood, the following options are Recirculation mode cooker hoods available: require a conversion kit and charcoal filters (see “Technical Data”) Extraction mode The air is drawn in and cleaned first by The air is drawn in and cleaned by the the grease filters and then by the grease filters and directed outside.
Before using for the first time Settings with the deflector Select Extraction mode or plate retracted Recirculation mode The cooker hood must be switched off The cooker hood is suitable for both before activating settings. The extraction mode and recirculation deflector plate must be retracted.
WiFi network. You will then be able to operate the cooker hood via the Miele@mobile app. If your Miele hob is connected to a Connecting via the app home WiFi network, you can control the cooker hood automatically via the The Miele@mobile app can be used to Con@ctivity function.
Page 19
Before using for the first time Switch the cooker hood off. Start signing the appliance on in the Press and hold the control. app. Follow the signing in instructions. If requested to activate WiFi on the cooker hood, proceed as follows: ...
Tip: If your WiFi router does not support WPS, please connect via the Press the control on the cooker Miele@mobile app. hood after a few seconds. After a short while the 2 will light up constantly, and the 3 and the B will flash on and off.
Before using for the first time Sign out of WiFi (reset to factory settings) Touch the control. To set up a new WiFi connection, the existing WiFi connection must be disconnected. Switch the cooker hood off. 2 will light up constantly, 3 will flash on and off.
Con@ctivity is the direct communication WiFi connection (Con@ctivity 3.0) or system between an electric Miele hob via a wireless connection (Con@ctivity and a Miele cooker hood. It enables the 2.0). cooker hood to operate automatically depending on the operational state of a Once the WiFi connection has been Miele hob with onset controls.
(Con@ctivity 3.0) further details, see the hob operating instructions. Prerequisite: – WiFi enabled Miele hob When successfully connected the 2 and If you do not have a home network, you 3 will light up constantly. can establish a direct connection between the hob and the cooker hood.
(Con@ctivity 2.0) See the relevant installation instructions provided with the Prerequisite: Con@ctivity 2.0 stick. – Con@ctivity 2.0 enabled Miele hob Activating the wireless connection The cooker hood and the hob must installed and operational. Wireless connection must be activated on the cooker hood and the hob at the same time.
Page 25
Before using for the first time Activating the cooker hood The hob and cooker hood must be switched off. To activate Con@ctivity 2.0 press the control. Press the run-on control for 2 will light up constantly, 3 will flash on approx.
Page 26
Before using for the first time Finish activation on the cooker hood Activation failed If the wireless connection cannot be established despite activating the cooker hood and the hob, both When successfully connected the B will appliances must first be deactivated go out, and the 2 and 3 will light up and then re-activated.
Before using for the first time Signing the remote control on/ Press the control to deactivate If the connection has been lost between Con@ctivity 2.0. the remote control and the cooker hood, the remote control and the remote control function on the cooker hood must be signed on again.
Before using for the first time Signing off the remote control Signing on the remote control Press the run-on control on the A WiFi connection cannot be used at cooker hood for approx. 10 seconds the same time as the remote control. until 1 lights up.
Before using for the first time Wait until B on the cooker hood has gone out and 2 and 3 are lit up constantly. The wireless connection has now been established. Confirm the signing on procedure by pressing the run-on control on the cooker hood.
Operation (Automatic mode) When Con@ctivity is active, the cooker hood always operates in Automatic mode (see “Setting up Con@ctivity”). If you wish to manually operate the cooker hood, see "Cooking without Con@ctivity. Examples for power levels 1 to B Cooking with Con@ctivity Reaction time (Automatic mode) The cooker hood reacts with a slight...
Page 31
Operation (Automatic mode) Cooking process Switching off If for example you switch on a Switch off all cooking zones. cooking zone at the highest power The cooker hood fan will reduce its level to heat a pan for frying and power level in stages over the next few reduce the power level after approx.
Operation (Automatic mode) You can also operate the cooker hood Leaving automatic mode manually for a complete cooking temporarily process. To leave automatic mode temporarily To do so switch the cooker hood fan during cooking: on before the hob. ...
The deflector plate extends. The fan will be operated via its control panel. come on at power level 2. Once the connection has been Replace the grease filter. established via the home WiFi network, the cooker hood can be operated via the Miele@mobile app.
Operation (Manual mode) Selecting the power level Selecting the run-on time For light to heavy cooking vapours and It is advisable to run the fan for a few odours, select from power levels 1 to 3. minutes after cooking has finished. This helps to remove any lingering vapours For short periods of cooking food with and odours from the air.
Operation (Manual mode) Switching the fan off Power management Press the On/Off control on the The cooker hood is fitted with a Power cooker hood or the control on the management system. Power remote control repeatedly until the management helps to save energy.
Page 36
Operation (Manual mode) Switching Power management on/off If you don't confirm your selection within 4 minutes, the cooker hood will Switch the cooker hood off. The automatically revert to the original deflector plate must be retracted. setting. Remove the grease filters. The controls are accessible via the slots for the grease filters.
Operation (Automatic and Manual modes) Switch the cooker hood off. The Operating hours counter deflector plate must be retracted. The cooker hood registers the length of time it has been operated. When the grease filter symbol or the charcoal filter symbol ...
Operation (Automatic and Manual modes) Switch the cooker hood off. The Altering or deactivating the charcoal filter operating hours counter deflector plate must be retracted. Charcoal filters are needed for recirculation mode. You can set the operating hours counter to suit the type of cooking you do.
Operation (Automatic and Manual modes) Reading the filter operating hours counter You can check the percentage of time set already used before the filter needs replacing. Switch the fan on with the On/Off control . Press and hold the operating hours control : –...
Energy saving tips This cooker hood operates very – Use the Con@ctivity function. The efficiently and economically. The cooker hood will switch on and off following will help you to save even automatically at the optimum power more energy when using it: level for the cooking you are doing, which ensures low energy –...
General information To help prevent re-soiling, a proprietary conditioning agent for The surfaces and controls are stainless steel (available from Miele) susceptible to scratches and can also be used. abrasion. Apply sparingly with a soft cloth. Please observe the following cleaning instructions.
Cleaning and care Removing a grease filter Grease filters When handling a grease filter, be Fire hazard! careful not to drop it. Oversaturated grease filters are a fire This can result in damage to the filter hazard. and the hob below. Clean the grease filters at regular Make sure you hold the filter securely intervals.
Page 43
Cleaning and care Unsuitable cleaning agents After cleaning After cleaning, leave the filters to dry Unsuitable cleaning agents can cause damage to the surface of the filters if on an absorbent surface before used regularly. replacing them. Do not use: ...
6 months. Charcoal filters are available to order via The operating hours counter will remind the Miele Webshop, the Miele Spare you to replace the charcoal filters by Parts Department (see end of this lighting up the charcoal filter symbol .
Cleaning and care Remove the old battery and replace Remote control with a new one. Make sure the Cleaning the remote control polarity is correct. Only clean the surface with a damp Refit the cover and secure with the cloth.
Installation Appliance dimensions DA 3668 DA 3698...
Page 47
Installation a Extraction, recirculation with conversion kit DUU 150. b The wall unit carcase needs to be 38 mm shorter than the wall unit door. c Installation is also possible in a 600 mm wide cabinet. The following should be noted: – The adjoining units must also be shortened by 38 mm.
Installation Safety distance between hob and cooker hood (S) When planning the installation height of your cooker hood, the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood is as follows, unless a greater distance is specified by the manufacturer of your cooking appliance.
Installation Installation recommendations Before installation – To achieve optimum vapour Before installation, it is important extraction, the cooker hood must be to read the information given on the positioned centrally over the hob, not following pages as well as the to the side.
Page 51
Installation a 1 collar for exhaust ducting 150 mm. b 1 reducing collar for exhaust 4 screws M4 x 16 mm for securing the cooker hood to the brackets and for ducting 125 mm. securing the spacer strip. c 1 non-return flap for fitting into the exhaust socket on the motor unit (not needed for recirculation mode) d 2 covers for the brackets.
Page 52
Installation Repositioning the ducting connection The fan can be rotated to allow the ducting to be fitted at the back of the cooker hood. This may be necessary if the cooker hood is being fitted in a reduced height wall unit, for example. Repositioning is carried out before installing the cooker hood.
Page 53
Installation Pull the grease filters out of the slots Screw the spacer strip to the back of in the front of the cooker hood the cooker hood at the required housing. position. Use the screws supplied. To attach the spacer strip to the lower The spacer strip needs to be attached edge ...
Page 54
Installation Screw the brackets onto the right and left inside walls of the housing unit so that they are flush with the bottom edges of the unit. The brackets are designed for 16 and 19 mm thick unit sides. Orientate the bracket so that the vertical depth matches the thickness of the unit side, as shown.
Page 55
Installation Before connecting the cooker hood to the electricity supply, please see “Electrical connection” and “Warning and Safety instructions”. Connect the cooker hood to the electricity supply. Press the button on the remote control. The fan switches on and the deflector plate comes out.
Page 56
Installation Press the On/Off control on the cooker hood or the control on the remote control repeatedly until the fan switches off. The fan switches off. The deflector plate retracts. Tighten the four fixing screws from below.
Page 57
Installation When fitting a 900 mm wide cooker Realign the cooker hood and tighten hood into a 900 mm wide housing unit up the screws on the casing. without side base supports, additional Conceal the fixing holes on the alignment and securing of the cooker deflector plate which are not used.
Page 58
Installation Secure the spacer strip to the bottom of the wall unit as well. The covers for the brackets are designed for 16 mm and 19 mm thick unit sides. Turn the covers so that they are in the appropriate position and fit them onto the brackets.
Installation Take the grease filters out and remove any protective foil. Replace dai2699 the grease filters. Attach the exhaust ducting, e.g. flexible hose, to the exhaust socket Extraction mode using a hose clip (available as an optional accessory). When using 125 mm ducting, fit the reducing collar supplied into the exhaust socket (see “Connection for air...
A conversion kit, A non-return flap is not used in available through your dealer of from recirculation mode. Miele is required for operating the Fit the charcoal filters (see “Cleaning cooker hood in recirculation mode. You and care”).
Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national and For extra safety it is advisable to protect local safety regulations (BS 7671 in the appliance with a suitable residual...
Connection for air extraction If the exhaust is ducted through an If the cooker hood is used at the outside wall, a telescopic wall vent or same time as a heating appliance a roof vent (available as an optional that relies on oxygen from the same accessory) is recommended.
Connection for air extraction Condensate trap Silencer To achieve even further reductions in noise levels, a special silencer (optional accessory) can be fitted in the ducting system. In addition to insulating the exhaust ducting, we recommend that a suitable Extraction mode condensate trap is also installed to collect and evaporate any condensate which may occur.
Page 64
Connection for air extraction Recirculation mode The silencer needs to be positioned between the exhaust socket and the exhaust grille . Ensure there is adequate space for fitting it.
Miele dealer or the Miele Service Department. Contact details for Miele are given at the end of this booklet. N.B. A call-out fee will be charged for service visits where the problem could have been resolved as described in these instructions.
Technical data Fan motor 80 W Hob lighting DA 3668 2 x 3 W DA 3698 3 x 3 W Total connected load DA 3668 86 W DA 3698 89 W Mains voltage, frequency AC 230 V, 50 Hz Fuse rating 10 A Mains connection cable length 1.5 m Weight DA 3668 16 kg DA 3698 19 kg WiFi module Frequency band 2.412 - 2.462 GHz Maximum transmitting power <...
Technical data Conformity declaration Miele hereby declares that this cooker hood complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: – Products, Download from www.miele.co.uk – For service, information, operating instructions etc: go to www.miele.co.uk/ domestic/customer-information-385.htm and enter the name of the product or...
Page 68
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier DA 3668 Annual Energy Consumption (AEC 24,5 kWh/year hood Energy efficiency class Energy efficiency index (EEI...
Page 69
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier DA 3698 Annual Energy Consumption (AEC 25,6 kWh/year hood Energy efficiency class Energy efficiency index (EEI...