Cisco TelePresence SX20N Reference Manual

Download this manual

Cisco TelePresence SX20N Reference Guide

TECHNICAL SUPPORT 1-866-454-6861

Ensure that the power cable is

plugged into the power outlet in the

wall.

Confirm that the network cable is

plugged into the network outlet in the

wall. The network cable must be

plugged into a dedicated OTN network

outlet.

Verify that the power bar is turned

on. The power bar supplies the whole

system and you can turn off your system

here at the end of your session.

Ensure that the monitor is on.

Check that the codec/camera is on

by checking the LED light at the front

of the codec

Pick up the remote control and

unmute your videoconferencing sound

by pressing the "Mic Off" button on the

remote control.

Turn the Self view on by navigating to

the camera icon using the remote

arrows and selecting the thumb tac icon.

Page 1: Technical Support
Cisco TelePresence SX20N Reference Guide Ensure that the power cable is plugged into the power outlet in the wall. Confirm that the network cable is plugged into the network outlet in the wall. The network cable must be plugged into a dedicated OTN network outlet.
Page 2 Cisco TelePresence SX20N Reference Guide Zoom Camera in and out (Camera Mode) Move Camera (Camera Mode)
Page 3 Cisco TelePresence SX20N Reference Guide Icons at the top right of the screen during a videoconference call The camera icon enables you to turn self-view on (thumb tack), turn self-view off (diagonal arrows) and preview camera view. In this mode, use the arrows on the remote to move the camera and the plus/minus to zoom in and out.
Page 4 Cisco TelePresence SX20N Reference Guide Icons that appears when you press the enter button on the remote during a videoconference. The share icon enables you to present content from your computer with others in the videoconference. Ensure you plug your presentation cable into the back of the codec.