Page 1
PT-DX820W/DX820LW P ro d u c t N u m b e r : PT-DX820B/DX820LB Projectors ™ P ro d u c t N a m e : As of February 2017. Specifications and appearance are subject to change without notice.
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Specifications Main unit 120–240 V AC, 9.0-4.0 A, 50/60 Hz Power supply Power consumption 790 W (810 VA) (0.3 W with set to , 3 W with STANDBY MODE set to STANDBY MODE NORMAL max. 2,696 BTU (without light output: 2,601 BTU) DLP™...
Page 3
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Terminals HDMI IN HDMI 19-pin × 1, Deep Color, compatible with HDCP, DVI-D IN DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link only RGB 1 IN BNC × 5 R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-DX820. 416(16-3/8) 498(19-19/32) Terminals Remote 1 input Remote 1 output Remote 2 input Serial input Serial output Dc out 5v...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Standard setting-up position (If using other than the ET-DLE030) *1 When the lens protrudes to the maximum. 64 mm (2-17/32 in) with the ET-DLE085 68 mm (2-11/16 in) with the ET-DLE105 ø60.5 24 mm (15/16 in) with the ET-DLE150...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Projection distance for 4:3 aspect ratio screen (If using other than the ET-DLE030) Unit: meters Height from the edge of screen Screen size Distance to screen (L) tocenter of lens (H) (diagonal) Fixed-focus Fixed-focus Zoom lens Zoom lens...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Projection distance for 16:9 aspect ratio screen (If using other than the ET-DLE030) Unit: meters Height from the edge of screen Screen size Distance to screen (L) tocenter of lens (H) (diagonal) Fixed-focus Fixed-focus Zoom lens Zoom lens...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Standard setting-up position (If using the ET-DLE030) NOTE: ø60.5 Illustrations show the projector installed using (2-3/8) optional ceiling mount bracket (6-axis adjustment mechanism) ET-PKD130H, optional bracket assembly ET-PKD130B and an optional lens. *1 Continuous height adjustment possible 331.3...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Projection distance for 4:3 aspect ratio screen (If using the ET-DLE030) Unit : meters Ultra-short focal length lens ET-DLE030 Close-up system dimensions Throw ratio 0.39:1 (0.41:1) From front of From rear of From top of set to...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Projection distance for 16:9 aspect ratio screen (If using the ET-DLE030) Unit : meters Ultra-short focal length lens ET-DLE030 Close-up system dimensions Throw ratio 0.39:1 (0.4:1) From front of From rear of From top of set to...
Page 12
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 4:3 ET-DLE085 minimum L (m) = (diagonal screen size in inches) × 0.0170 - 0.0471 maximum L (m) = (diagonal screen size in inches) ×...
Page 13
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Formula for calculating possible heights when using the ET-DLE030 If using a screen size which has not been previously mentioned, use the following calculation formulas to obtain the possible setting-up height. For screen aspect ratio of 16:10 Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.0-72.1...
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors Installable angle Install the projector at an angle within the range shown below. • Vertical direction • Horizontal direction The projector may be installed at a vertical The projector may be installed at a horizontal angle of 360°.
PT-DX820W/DX820LW/DX820B/DX820LB DLP™ Projectors List of compatible signals The signals that can be input to this projector are shown in the table below. Horizontal scanning fre- quencies of 15 kHz to 100 kHz, vertical scanning frequencies of 24 Hz to 120 Hz, and a dot clock of 162 MHz maximum can be input.