Setting Up Connection By Selecting A Wireless Router - Canon imagerunner advance C5550i User Manual

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Setting Up Connection by Selecting a Wireless Router

You can search the wireless routers available for connection and select one from the display of the machine. For the

network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the required setup

information, including the SSID and network key.

Security settings

If the wireless connection is set up by selecting a wireless router, the WEP authentication method is set to

<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to

select <Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, set up the

connection in <Enter Manually>.

Press <Preferences>

<Other (Set Manually)>.

Press <Select Access Point>.

The machine starts searching for available wireless routers.

Select a wireless router, and connect to it.

If the security setting of your wireless LAN router is WEP or WPA/WPA2-PSK

Select the wireless LAN router to use, and press <OK>.

Press <WEP Key> or <PSK>, and enter the network key.

When the configuration is complete, the screen <Connected.> will be displayed.

If the security setting of your wireless LAN router is other than WEP or WPA/WPA2-

Select the wireless LAN router to use, and press <OK>.

When the configuration is complete, the screen <Connected.> will be displayed.

Checking the SSID and Network Key(P. 31)

Setting Up a Connection by Specifying Detailed Settings(P. 29)