Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
CD AUTO CHANGER
KDC - CPS89
SERVICE MANUAL
The MECHANISM OPERATION is the same as model KDC-C710.
Please refer to the service manual of model KDC-C710 (B51-7104-00).
When transporting this model, always attach CAUTION CARD and STEPPED SCREW (for transportation).
Refer to the Destination "E1" of service manual KDC-CPS87's parts list (B51-7730-00)
except the following parts.
＊ New Parts
Ref.No.
206
2C
207
3C
-
-
-
PARTS LIST
N
A
Parts No.
d
e
d
w
KDC-CPS89
A22-2842-02
SUB PANEL
＊
A64-2898-01
PANEL
＊
B64-2345-00
INST.MANUAL(ENG,FRE,SPA,POR)
＊
B64-2354-00
INST.MANUAL(GER,DUT,ITA)
＊
H54-2597-04
ITEM CARTON CASE
＊
© 2002-11 CREATED IN JAPAN
B51-7996-00 (C) 0
Service jig
For initial position setting
COMPACT DISC AUTO
CHANGER
NEW ANTI VIBRATION MECHANISM
COMPACT
D.R.I.V.E.
CD-R/RW
DIGITAL AUDIO
DYNAMIC RESOLUTION INTENSIVE VECTOR ENHANCEMENT
Description
Parts No.
W05-0635-00
10
DISC
KDC-CPS89
DISC NAME PRESET
TEXT
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-CPS89
Summary of Contents for Kenwood KDC-CPS89
- Page 1 Please refer to the service manual of model KDC-C710 (B51-7104-00). For initial position setting W05-0635-00 When transporting this model, always attach CAUTION CARD and STEPPED SCREW (for transportation). DISC COMPACT DISC AUTO CHANGER KDC-CPS89 NEW ANTI VIBRATION MECHANISM DISC NAME PRESET COMPACT D.R.I.V.E. TEXT CD-R/RW...
- Page 2 CD AUTO CHANGER KDC-CX87/CPS87 SERVICE MANUAL © 2001-1 PRINTED IN JAPAN B51-7730-00 (N) 3387 Service jig Parts No. The MECHANISM OPERATION is the same as model KDC-C710. Please refer to the service manual of model KDC-C710 (B51-7104-00). For initial position setting W05-0635-00 When transporting these models, always attach CAUTION CARD and STEPPED SCREW (for transportation) Illustration is KDC-CX87.
-
Page 3: Block Diagram
KDC-CX87/CPS87 BLOCK DIAGRAM LCD1 KEY MATRIX 2,50-56 6-43 LCD DRIVER 19-22,32,66 REMOTE SENSER CN101 CN101 CN103 Q1,6 19-22,32,66 HOLD Q4,5 DETECTION u-COM RESET DRIVER BATT 29,30,60 (+5V) P ON 74,77 12-17 CH-CONTROL Q308 Q310 MODE 1,2 MODE 1,2 CN104 +V(RF STAGE) RIPPLE AVR(+5.6V) ANT IN... -
Page 4: Component Description
KDC-CX87/CPS87 COMPONENT DESCRIPTION GSUB-CIRCUIT UNIT (X13-9930-00) Ref.No. Component Name Application/Function Operation/Condition/Compatibility UPD78058GCB82T System MI-COM. CH1/CH2/AUX control PST9137NR Reset IC When BU 5V voltage is less than 3.7V, IC outputs "Lo". While CD-CH1's outputs are selected, Q1's base goes "Lo", and Q3 is DTC124EUA Relay drive turned off. -
Page 5: Components Description
KDC-CX87/CPS87 COMPONENTS DESCRIPTION Ref.No. Component Name Application/Function Operation/Condition/Compatibility UPD784214GC091 Mechanism MI-COM. Mechanism and servo control BR24C02F-W or CAT24WC02JI or M24C02WMN6T EEPROM LPS data back-up memory or S-24C02BFJA or 24LC02BT-ISN S-80830ANNP Reset IC When BU 5V voltage is less than 3.0V, IC outputs "Lo". IC10 KKZ05F D.R.I.V.E. -
Page 6: Microcomputer's Terminal Description
KDC-CX87/CPS87 MICROCOMPUTER'S TERMINAL DESCRIPTION GIC1 (SUB-CIRCUIT UNIT: X13-9930-00) Pin No. Pin Name Description Processing Operation 1 - 3 Not used(N.C.) AVSS A/D, D/A converter ground connection terminal Not used(N.C.) REQH1 Communication request output to CH1 "Lo" : Communication requested AVREF1 D/A converter reference voltage input DATAC1 Data input from CH1... - Page 7 KDC-CX87/CPS87 MICROCOMPUTER'S TERMINAL DESCRIPTION GIC7 (CD PLAYER UNIT : X32-5160-00) Pin No. Pin Name Description Processing Operation NOR/RW CD-DA/CD-RW Switching Not used(N.C.) TSTB CD-TEXT parameter strobe P-CON P-CON output Not used(N.C.) Focus OK input "Hi" : Focus OK XTALEN Servo IC oscillation stop control "Hi"...
- Page 8 KDC-CX87/CPS87 MICROCOMPUTER'S TERMINAL DESCRIPTION Pin No. Pin Name Description Processing Operation RECQC Communication request to H/U "Lo" : Communication requested CHMUTE Audio mute request to H/U "Lo" : Audio mute requested Text data input from servo IC Text data output to servo IC TSCK Text data clock to servo IC 48-55...
- Page 9 KDC-CX87/CPS87 ADJUSTMENT L.P.S. initial position adjustment procedure 1. Connect the changer to the H/U. 2. While holding the magazine eject button of the changer, press the reset button of the H/U. 3. After about 3 seconds, release the magazine eject button. 4.
- Page 10 PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) X13-9930-00 (J74-1131-02) X13-9930-00 (J74-1131-02) TO CH2 TO CH2 TO H.U. TO H.U. CH-MUTE2 CH-MUTE2 REQH2 REQH2 AGND AGND AGND2 AGND2 CH-RST CH-CONO2 REQC2 CH-CONO2 CH-RST REQC2 CH-MUTE CH-MUTE DATAC2 DATAC2 DATAH2 DATAH2 REQHO REQHO HCLK2...
- Page 11 PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) X32-5160-00 (J74-1130-11) X32-5160-00 (J74-1130-11) SGND SGND R161 R161 LIMSW Vref Vref LIMSW LOESW LOESW R120 R120 C192 BU14V IOP- IOP+ IOP+ BU14V C192 IOP- Rch Lch R101 R101 CHRST CHRST R190 R190 R191 AMUTE R121...
- Page 12 (X13-9930-00) : UPD78058GCB82T : PST9137NR 2SB1565 DTA124EK DTC124E 2SC4081 Q1,2,7,8 : DTC124EUA RESET SW DTA143EK Q3,4 : DTB123YK 100K 5.0V Q5,6,10 : 2SC4081 DTB123YK DTC343T 5.0V 2SB1202 MOMENTARY DTC114YUA POWER Q9,10 D1-6 : MA3056WA DOWN SW 2SB1295 RESET IC 5V AVR : DAP202K D8-10 : DAN202U...
- Page 13 (X32-5160-00) RESET RESET SW RESET IC CHRST 100K MG SW 5.0V 100K 5.0V 100K EJ SW 100K R129 76(X92-) ARM SW AVREF0 CHCON PON SW 12.5MHz 220K 100P P ON BUDET 100K 1.3V R100 C67 0.1 1.2V 5.0V CHCON SW LOE SW 5.0V 5.0V...
- Page 14 (X16-1010-00) SIGNAL LINE GND LINE Q4,5 B LINE 0bit MUTE : UPD63711AGC C191 PU1(X92-) : NJM4580MD 3.6K : NJM5532MD 7.0V OPTICAL : KIA78L05F 330P 3.6K PICKUP : LA6576 Q6,7 : UPD784214GC091 A MUTE 330P : BR24CO2F-W : S-80830ANNP VREF IC10 : KKZ05F 10u16 3.5V...
- Page 15 KDC-CX87/CPS87 EXPLODED VIEW (MECHANISM) φ2x3.5 : N09-4126-05 φ2x2.5(BLK) : N09-4288-05 φ2x5 : N86-2005-46 φ1.7x1.5(BLK) : N09-4189-05 φ2x6 : N09-4154-05 M1.7x3 : N09-4181-05 M1.7x2.2 : N39-1722-46 φ2x3.5 : N09-4349-05 φ3.8 WASHER : N19-2105-14 φ4 WASHER : N19-2058-04 φ3.8 WASHER : N19-2080-14 φ3.5 WASHER : N19-2028-04...
-
Page 16: Exploded View (Unit)
KDC-CX87/CPS87 EXPLODED VIEW (UNIT) M4x17.3 N09-4383-05 φ3x8 Refer to the parts list. φ2.6x6 Refer to the parts list. (X13-9930-00) φ2.6x6 (X13-) N09-4143-05 BLACK SILVER Parts with the exploded numbers larger than 700 are not supplied. -
Page 17: Parts List
FRONT GLASS M1E1 C6 ,7 CK73GB1C104K CHIP C 0.10UF K ∗ B10-3076-04 FRONT GLASS C9 ,10 CK73GB1H222K CHIP C 2200PF K B43-1237-04 KENWOOD BADGE M1E1 C92-1449-05 ELECTRO 100UF 16WV B43-1238-04 KENWOOD BADGE C92-0090-05 CHIP C 22UF 6.3WV B58-1275-04 CAUTION CARD... - Page 18 KDC-CX87/CPS87 PARTS LIST ∗ New Parts Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. SUB-CIRCUIT UNIT (X13-9930-00) Teile ohne Parts No. werden nicht geliefert. D e s t D e s t Ref.
- Page 19 KDC-CX87/CPS87 PARTS LIST ∗ New Parts Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. CD PLAYER UNIT (X32-5160-00) Teile ohne Parts No. werden nicht geliefert. D e s t D e s t Ref.
- Page 20 KDC-CX87/CPS87 PARTS LIST ∗ New Parts Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. CD PLAYER UNIT (X32-5160-00) Teile ohne Parts No. werden nicht geliefert. D e s t D e s t Ref.
- Page 21 KDC-CX87/CPS87 MEMO...
-
Page 22: Specifications
Installation size ..............250(W)×80 (H)×202 (D)mm 9-13/16(W)×3-1/8(H)×7-15/16(D)inch Weight ......................2.3kg (5.1lbs) KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. KENWOOD CORPORATION 14-6, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-8501 Japan KENWOOD SERVICE CORPORATION KENWOOD ELECTRONICS ITALIA S.p.A.