Table of Contents
Advertisement
System board
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules
●
Expansion cards
●
Fan sink
●
Processor
4.
Disconnect all cables connected to the system board, noting their location for reinstallation.
5.
Remove the six Torx screws that secure the system board to the chassis.
6.
Lift the system board up and out of the computer.
NOTE:
When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and
then align the board with the chassis screw holes.
NOTE:
When replacing the system board, you must change the chassis serial number in the BIOS.
(Access panel on page
(Memory on page
(Expansion cards on page
(Fan sink on page
44).
(Processor for use in HP 280 G2 models (Intel) on page
System board appearance may vary.
(Preparation for disassembly on page
18).
22)
25)
17).
45)
System board
47
- Quick Links:
- Computer Major Components
- Power Supply
Hide quick links:
Advertisement
Table of Contents
