DVD Recorder DVDR610 DVDR615 DVDR616 User manual Visit us at www.p4c.philips.com for service support Make your own DVD 3139 246 13453 1DVDR6xx_Eng00_13453final2 7/8/04, 5:36 PM...
Page 2
– Connect the blue wire to the terminal Go to www. p4c.philips.com for software upgarde. marked N or coloured black. – Connect the brown wire to the terminal marked L or coloured red.
Page 3
LASER CAUTION Type Semiconductor laser VISIBLE AND INVISIBLE LASER InGaAlP (DVD) RADIATION WHEN OPEN AVOID AIGaAs (CD) EXPOSURE TO BEAM Wave length 658 nm (DVD) ADVARSEL 790 nm (CD) Output Power 30 mW (DVD+RW write) SYNLIG OG USYNLIG 1.0 mW (DVD read) LASERSTRÅLING VED ÅBNING 1.0 mW (CD read) UNDGÅ...
Special Functions Your PHILIPS DVD recorder has a number of special functions that will make day-to-day use of your new DVD recorder easier for you. Using the ‘Digital Photo This connection is also known Manager’, you can view and as 'FireWire' and 'IEEE 1394.'...
Table of Contents Special Functions Installing the DVD Recorder ........First Installation ........21-22 Care and Safety Information TV channel programming ......23 Automatic TV channel search ....23 Setup .............. 8 Sorting TV channels according to Cleaning discs ..........8 TV sequence ..........
Page 7
Table of Contents Recording Using the Browser Discs for recording ........36 Browsing the disc ........50 Colour coded buttons functions ....50 Recording settings ........36 Browsing the picture disc ......51 Recording mode ........... 37 Recording language ........37 Adding pictures to an album ......
Care and Safety Information CAUTION! Cleaning discs High voltage! Do not open. Some problems occur because the disc You run the risk of getting an inside the recorder is dirty (frozen electric shock. picture, sound disruptions, picture The machine does not contain any distortions).
General Information Introduction Accessories supplied Your Philips DVD recorder allows you to – Remote control and batteries record the TV programmes or duplicate – Scart cable camcorder recordings to a DVD+RW or – Antenna cable DVD+R and play pre-recorded DVDs.
Connecting to TV General Setting the TV to the correct video in channel The necessary cable connections must be made before you can record or playback Press STANDBY-ON 2 on the DVD TV programmes using your DVD recorder to turn it on. recorder.
Connecting to TV (cont’d) Option 1: Using SCART socket Antenna or Satellite/Cable TV signal S-V ID E O AU D IO O U T V ID E O IN SCART IN The scart or Euro AV cable serves as the Press STANDBY-ON 2 on the DVD universal connector for picture, sound recorder to turn it on.
Connecting to TV (cont’d) Option 2: Using S-Video (Y/C) socket Antenna or Satellite/Cable TV signal S-V ID E O AU D IO O U T V ID E O IN SCART IN This connecting cable, also known as the Use an audio cable (red/white) to SVHS cable, is used to transmit the connect the DVD recorder’s brightness signal (Y signal) and colour...
Connecting to TV (cont’d) Option 3 : Using Video (CVBS) socket Antenna or Satellite/Cable TV signal S-V ID E O AU D IO O U T V ID E O IN SCART IN This cable, usually featuring yellow cinch Use an audio cable (red/white) to plugs, is used for transmitting the connect the DVD recorder’s Composite Video signal (FBAS, CVBS).
Connecting to Additional Devices Using second SCART socket Connecting a Cable Box/Decorder (EXT2-AUX-I/O) If your Cable Box/Decorder has a scart socket, you can choose to connect it to the second scart socket. Cable Box/Decoder/ Use a scart cable to connected the VCD/DVD player Cable Box/Decoder scart socket (usually labelled as ‘TV’...
Option 1: Using DV IN socket Alternatively, you can use VIDEO (for DVDR615 and DVDR616 only) connection if your camcorder has only a Use this connection if you have a Digital single video output (Composite Video, Video or Digital 8 camcorder.
Connecting to Additional Devices (cont’d) Using analogue audio output Using digital audio output sockets socket STEREO AUDIO IN DIGITAL IN You can connect the DVD recorder to a You can connect the DVD recorder to a two channel stereo system or receiver in A/V receiver or amplifier in order to order to enjoy the stereo sound system.
(input channel number the current video input source. 'CAM 1'). PREV/CH- ∞ DV IN (for DVDR615, DVDR616 only) – Go to the previous chapter track, do a – Input for digital camcorders or other reverse search, or go to the previous suitable devices using this connector channel.
DVD recorder SYSTEM-MENU DVD MODE – Access or exit the system menu. – Switch to DVD source mode. After that, you cannot use the buttons on the remote control to operate your Philips TV. 3139 246 13453 1DVDR6xx_Eng00_13453final2 7/8/04, 5:38 PM...
Page 19
– Adjust the volume of the TV set (for After that, you may use the following Philips TV with RC5 code only). buttons to control most of the Philips TV set: – STANDBY 2: Turn off the TV set. – 0-9: Press to select a TV channel at the –...
Remote Control (cont’d) Inserting Batteries Using the remote control to operate the system Aim the remote control directly at the remote sensor (iR) on the front panel. Select the source you wish to control by Open the battery compartment. pressing one of the source select buttons Insert two batteries type R06 or AA, on the remote...
Installing the DVD Recorder First Installation Press 4 to select { Done } and press OK to confirm. The First Installation menu will appear ➜ The { TV Format } menu appears on the very first time you turn on the DVD the TV.
Page 22
Installing the DVD Recorder (cont’d) Note: Make sure you have successfully Helpful Hints: made all the required connections to the – If the DVD recorder cannot find any TV DVD recorder, the TV and Satellite stations, select programme number {1} on Receiver/Cable Box (if any) and switched the TV set or check the cable connection them on.
Installing the DVD Recorder (cont’d) TV channel programming Sorting TV channels according to TV sequence Although the DVD recorder selects This feature is only available if you available TV channels during first have connected the DVD recorder installation, you may want to repeat the to your TV using the scart socket process later if more channels become (EXT 1 TO TV-I/O socket,) see page...
Installing the DVD Recorder (cont’d) Use the TV’s remote control to select Sorting the TV channels programme number {2} on the TV set. You may not agree with the sequence in Then, press OK on the DVD recorder’s which the individual TV channels have remote control.
Installing the DVD Recorder (cont’d) Setting favourite TV channels Manual TV channel search You can set your favourite TV channels In some cases, not all of the available TV for quick access by using the channel up/ channels may have been found and stored down button on the remote control.
Installing the DVD Recorder (cont’d) Press 4 to select { Preset } and press 2 Allocating a decoder to confirm. Some TV channels send coded TV signals Use the alphanumeric keypad 0-9 to that can only be viewed properly with a enter the preset number for the channel purchased or rented decoder.
Installing the DVD Recorder (cont’d) Setting the time and date Fine tuning the TV channels If the DVD recorder has not set the time DVD-VIDEO-TITLE 04|CO1 STOP and date correctly, set the clock manually. Analogue Ch. Set-up Press SYSTEM-MENU on the remote Decoder control.
Installing the DVD Recorder (cont’d) Setting the language You can select the language for subtitles and audio for DVD playback. For some DVDs, the subtitle/audio language can only be changed via the DVD disc menu. If the selected language is not available on the disc, the disc’s default setting language will be used instead.
Playback IMPORTANT! Playable discs – If the inhibit icon (XError) Using this DVD Recorder, you can play appears on the TV screen when a and record on the following discs: button is pressed, it means the function is not available on the Recording and Playback current disc or at the current time.
Playback (cont’d) Starting disc playback Playing a (Super) Video CDs (Super) Video CDs may feature 'PBC' If a dialogue appears on the TV showing : (Play Back Control). This allows you to { Do you want to access the disc play the video CDs interactively, following content ?}.
Playback (cont’d) Playing a DVD+R(W) disc Playing a picture disc (slide show) You can display JPEG pictures in the If the inserted disc has been write- selected roll automatically one after the protected or it is a finalised DVD+R, other at adjustable intervals. playback starts automatically.
Additional Playback Features Using Toolbar options Changing subtitle language This operation works only on DVDs with Press SYSTEM-MENU on the remote multiple subtitle languages, you can control. change the language you want while ➜ The system menu appears on the TV. playing DVD.
Additional Playback Features (cont’d) Changing audio soundtrack Zooming in language This option allows you to enlarge the This operation works only on DVDs with picture on the TV screen and to pan multiple soundtrack language or VCDs through the enlarged picture. with multiple audio channel.
Additional Playback Features (cont’d) Changing to another title/ Searching forwards/ chapter/track backwards When a disc contains more than one You can fast forward or fast reverse a track, title or chapter, you can change to a disc at four, eight or thirty two times different track, title or chapter as follows.
Additional Playback Features (cont’d) Selecting various play mode Shuffle play Select shuffle play mode to allow the Repeat play DVD recorder to randomly select and play tracks on the disc (MP3 and audio You can select a Chapter, Track, Title or CDs only).
Recording IMPORTANT! Discs for recording Unrecordable pictures Two different formats of DVD recordable Television programmes, films, video tapes, discs can be used with this DVD discs, and other materials may be recorder: copyrighted, it cannot be recorded on this recorder. Recording settings DVD+RW –...
You can insert a chapter markers within a – {M1} record mode only available for title during recording. This lets you model DVDR615 and DVDR616 only. access specific points on the recorded disc as you would choose a chapter on a DVD.
Recording (cont’d) Manual recording Direct record function Use the 'Manual recording' function to To enable direct recording from your TV start recording immediately (e.g., to set, make sure that the direct record record a TV show already in progress). mode is turned on. See page 40 “Direct Recording”...
Recording (cont’d) For recording from external device, you Manual recording with have to start play on the external device. automatic turn-off (One While recording in progress, you can Touch Recording) press OK to insert a chapter marker wherever necessary. Follow the steps of “Manual Recording”...
Recording (cont’d) Direct recording Deleting a recording The Direct Record function allows you to You can delete a specific recording from record the TV programme which you are the DVD+R(W). currently watching when the DVD Insert a recorded DVD+RW or an recorder is turned off.
Timer Recording Introduction Programming recordings Use 'Timer Recording’ to automatically Turn on the TV power. Select the correct start and stop a recording at a later date/ Video In channel at the TV. time. The DVD recorder will tune to the right programme number and begin Press TIMER on the remote control.
Timer Recording (cont’d) { Start time } To exit, press TIMER. – Enter the start recording time and Insert a DVD+R(W). press OK to confirm. { Stop time } Press STANDBY-ON to turn off the – Enter the stop recording time and DVD recorder.
Timer Recording (cont’d) ® To clear the ShowView entry, press the Programming recordings matching colour coded button on the ® with the ShowView System remote control to select { Clear }. With this programming system, you only ® To cancel the ShowView programming, ®...
Timer Recording (cont’d) Changing a programmed Deleting a programmed recording recording Turn on the TV power. Select the correct Turn on the TV power. Select the correct Video In channel at the TV. Video In channel at the TV. Press TIMER on the remote control. Press TIMER on the remote control.
Editing/Finalising Recording About editing Index Picture screens The Index Picture screen shows your You can change disc contents and settings recordings on a DVD+RW or DVD+R. It for a recorded DVD+RW or unfinalised appears automatically when you insert a DVD+R from the edit menu screen. DVD+RW or DVD+R or when you stop Photo editing is limited to edit the playing or recording.
Editing/Finalising Recording (cont’d) Changing the disc/title name Finalising disc (DVD+R) This function is necessary for a DVD+R Insert a recorded DVD+RW or an in order to be played back on a DVD unfinalised DVD+R. player. Otherwise, the DVD+R will play ➜...
Editing/Finalising Recording (cont’d) Video editing Hiding unwanted chapter You can choose to hide certain scene for In the edit video mode, the entire playback (e.g. commercial skipping) or recording will be played back regardless make them visible again. of whether they are hidden or not. Follow the steps of “Video editing”...
Editing/Finalising Recording (cont’d) Editing chapter (merge/split/hide) Editing title (divide/append/Index picture) Start playback a recorded DVD+RW or Title editing is only possible in pause an unfinalised DVD+R. mode. Press EDIT on the remote control. Start playback a recorded DVD+RW or Press the matching colour coded button an unfinalised DVD+R.
Editing/Finalising Recording (cont’d) { Append } - for DVD+RW only Photo editing – Select this to append record to the The Photo (JPEG picture) recordings on a existing recording from the position of DVD+R(W) are limited to edit the the playback. Continue steps 5~7. information.
Using the Browser Browsing the disc Colour coded buttons functions In the Media Browser mode, a number of You can view and manage possible functions are available via the colour contents within your discs by using an coded buttons on the remote control. on-screen console called the Media Browser.
Using the Browser (cont’d) Browsing the picture disc Press OK to display the picture overview. ➜ The 12 roll thumbnails picture screen The Media Browser allows you to view appears. the JPEG pictures discs or playback as a slide show or store them in an album. 06/06/2004 DVD / Photo / Rolls / Roll KYZ JPEG Photo can handle up to a maximum...
Using the Browser (cont’d) Press the matching colour button on the Changing the picture order within an album remote control to select { Move }. ➜ A ‘navigator’ will appear on the menu You can re-arrange the picture position in enable you to select the position between the album in order to create the desired the photos.
Using the Browser (cont’d) Protecting the recorded title Changing the slide show settings (DVD+RW) You can adjust the various slide show settings to your individual needs. You can choose to protect the recorded title on an DVD+RW in order to prevent Press BROWSER on the remote accidental loss of recordings.
System Menu - Preferences Accessing to the Preferences Recording options For more information on this menu, please see pages 36~38 “Recording Switch on the TV set. Select the correct settings”. Video In channel at the TV. Press SYSTEM-MENU on the remote Sound control.
System Menu - Setup Accessing to the Setup System options DVD-VIDEO-TITLE 04|CO1 STOP System Turn on the TV set. Select the correct Set-up Video In channel at the TV. Eco mode Auto standby Press SYSTEM-MENU on the remote Second RC control.
System Menu - Setup (cont’d) { OSD } Video output Select the level of On-screen display information. DVD-VIDEO-TITLE 04|CO1 STOP – { Full } : Complete information always Video output Set-up display during use. – { Reduced } : The help text and colour TV shape button bar will remove from the display.
System Menu - Setup (cont’d) { Video output } Language Choose the type of video output that For more information on this menu, matches the video connection between please see page 28 “Setting the language”. the DVD recorder and your TV. –...
Use the alphanumeric keypad 0-9 to enter your new four-digit pin code. You Access Control limits viewing of discs must enter the same pin code a second that exceed the limits you set. Philips time to confirm it. cannot guarantee the availability of Access ➜...
Setting Access Control (cont’d) Authorising discs You can enable or disable viewing of a specific disc. This DVD recorder can memorise settings for 50 discs. Insert the disc. ➜ If the disc has been locked (child lock on), the pin code entry menu will appear on the TV.
Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power.
Page 62
Troubleshooting (cont’d) Problem Solution Disc will not play. – Insert the disc with the label facing up. – The child lock is on. Read chapter “Setting Access Control - Activating/Deactivating the child lock” for details. – Wrong region code. The DVD must be coded for ALL regions or Region 2 in order to play on this DVD recorder.
Page 63
Troubleshooting (cont’d) Problem Solution Recordings are not – The TV channel you want to record is not stored or you selected occurring as scheduled. the wrong programme number. Check TV channels stored. New recordings cannot be – If you adjust the clock after you set a timer recording, reset the made.
Page 64
Troubleshooting (cont’d) Problem Solution The message 'Disc contains – This message may appear if you insert a disc that was not unknown data' appears. finalised. DVD+R's that have not been finalised are very sensitive to fingerprints, dust, or dirt. This may cause problems during recording.
Troubleshooting (cont’d) Problem Solution The message 'Recording of – Select { Switch now } to switch the DVD recorder to standby <XX> will start within 1 mode. A programmed timer recording will only start recording if minute' appears. the DVD recorder is in standby mode. –...
Display panel symbols/messages BLOCKED The following symbols/messages may appear on your DVD recorder display: The disc tray cannot be opened or closed due to some mechanical obstruction. COMPATIBLE The DVD Recorder is busy making changes to make the disc DVD-compatible. CLOSING 00:00 Disc tray is closing.
A disc with PAL recordings has been inserted and an attempt was made to record an NTSC signal. Insert a new disc or use a disc containing NTSC recordings. PHILIPS The DVD recorder has been turned on. PHOTO MMM/NNN Number of the current photo (for Photo mode).
Disc types Front Connections Recording : DVD+RW/+R – i.LINK DV in (IEEE 1394 4-pin) Playing: DVD-Video, Video CD, (DVDR615 and DVDR616) SuperVCD,Audio CD, MP3 CD, Picture CD, – S-video in CD-R/RW, DVD-R, DVD-RW – Video in – Audio left/right in...
Glossary Analogue: Sound that has not been turned into MPEG: Motion Picture Experts Group. numbers. Analogue sound varies, while digital A collection of compression systems for digital sound has specific numerical values. These jacks audio and video. send audio through two channels, the left and Multichannel: DVDs are formatted to have each right.
TV System Guide COUNTRY DVD REGIONS AFGHANISTAN PAL/SECAM B ALBANIA PAL B PAL G ALGERIA PAL B PAL G ANGOLA PAL I ARGENTINA PAL N PAL N AUSTRALIA PAL B PAL H AUSTRIA PAL B PAL G AZORES PAL B BAHAMAS NTSC M BAHRAIN...
TV System Guide (cont’d) COUNTRY DVD REGIONS LIBYA SECAM B SECAM G LITHUANIA PAL D (was SECAM) PAL K LUXEMBOURG PAL B/SECAM L PAL G/SEC L MADAGASCAR SECAM K1 MADEIRA PAL B MALAGASY SECAM K1 MALAWI PAL B PAL G MALAYSIA PAL B MALI...
Page 72
Meet Philips at the Internet http://www.philips.com http://www.p4c.philips.com DVDR610 DVDR615 DVDR616 CLASS 1 LASER PRODUCT 3139 246 13453 SgpJP-0428-05-1 3139 246 13453 1DVDR6xx_Eng00_13453final2 7/8/04, 5:44 PM...
DVDR610 QUICK USE GUIDE DVDR615 DVDR616 12nc: 3139 246 14052 ANTENNA/ LANGUAGE AND COUNTRY CABLE SIGNAL Select Language and Country Menu Language English Spanish Country French Done TV FORMAT Select your TV format TV format 4:3 Panscan 4:3 Letterbox Done...
... cont. SUPER VIDEO { 0 } 1 2 3 4 EDIT PLAY Start Playback Start manual recording Insert a recordable DVD+R(W) with the label side facing up. Insert a disc with the label side facing up. Press TUNER on the remote control to see the TV Playback will start automatically.